IAG Group M ONE User Manual

User Instructions
M-ONE
FCC ID : 2AO5F-M-ONE
AH M-ONE.indd 1 2016-1-14 17:09:35
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING: SHOCK HAZARD-DO NOT OPEN
the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Do not install this equipment in a confined or built-in space such as a bookcase or similar unit, and keep well ventilated in open space. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
WARNING: Excessive sound pressure from earphones and headphones can cause hearing loss.
WARNING: Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc).
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: Please refer to the information on the exterior panel of the enclosure for electrical and safety information before installing or operating the apparatus.
WARNING: For the terminals marked with symbol of “
may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the used of ready-made leads or cords.
Mains Supply: The mains operating voltage of M-ONE is shown on the rear panel. If this voltage does not match the mains voltage in your area, consult your Audiolab dealer about converting the unit.
The mains supply fuse on the rear panel is accessible when the IEC mains plug has been removed. In the rare event that it has broken, check for any obvious cause before replacing the fuse with one of the correct rating and type. The fuse values are:
220 - 240V (UK, Korea, etc.) T2AL 250V 20mm Slow Blow
100 - 120V (USA, Japan, etc.) T4AL 250V 20mm Slow Blow
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
1: Important Safety Information
Page 1
IMPORTANT SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not bloc k any vent i lat i on op eni n gs. Inst a ll in accordance with the manufacture’s instructions.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or
This ligh tning flash with arrow head symbol with in an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: to reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
AH M-ONE.indd 2 2016-1-14 17:09:35
Welcome to Audiolab and congratulations in your investment in the M- ONE Bluetooth Integrated Amplifier.
M- ON E is a to ur- de- fo rc e in integrated amplification, comb in in g the ro le o f a sophisticated and versatile control unit that accepts a multiplicity of input sources with a highly charged power amplifier that will match superbly with any loudspeaker.
If you were able to look inside you would find a marvel of electron ic engineering encompassing an ultra-high performance DAC (Digital to Analogue Converter) that maximizes the musical capability of the M-ONE.
In addition versatility is provided via the Bluetooth (with aptX codec), USB, iPhone/iPad and Digital coax connections as well as two analogue line inputs. Support PCM and DSD decode, sampling rate high to PCM 384kHz and DSD256.
Whatever source of music you prefer to use, M-ONE will delight your ears with an engaging and dramatic presentation that we are sure you will continue to enjoy for many years to come.
Please read through this manual to obtain the very best performance from M-ONE.
Signal Input:
• One external SPDIF stereo LPCM coaxial digital input
One external SPDIF stereo LPCM optical digital input
One Bluetooth aptX wireless high fidelity input
One 12V trigger input
USB 2.0 port for replaying stereo form a compatible host
IOS docking for iPhone/iPad/iPod
Signal Output:
• Loudspeaker output.
Operating Features:
• Bluetooth aptX wireless high fidelity Lossless transmission
• Automatic detection decoding of external digital input source.
• Selectable digital fillers setting.
2: Getting Started
Page 2
• Mute and balance remote controls.
• Automatic trigger post equipments via 12V trigger output.
• Three display brightness available with on/off options.
• Auto standby function with function on/off options.
Unpacking
Unpacking the product fully. The carton should contain:
• The Audiolab M-ONE
• One M-ONE power cord suitable for your area.
• CD-ROM for USB driver
• This instruction manual.
If an item is missing or damaged report this to your dealer as soon as possible. Retain the packing for safe transport of your unit. If you dispose of the packing, do so with regard to any recycling regulation in your area.
Placement
The unit is designed to run warm during normal operation but ensure you do not black any ventilation openings.
Place the unit on a sturdy shelf or table. If you use an equipment rack ensure the unit has adequate ventilation and is on its own shelf. To minimize any interference place the power supply in a stable location as far from sensitive analogue input as possible.
Ensure your mains voltage corresponds to the rating plate on the rear of the product’ s power supply. If in doubt, consult your dealer. If you move to an area with a different mains voltage seek advice from an Audiolab appointed dealer or a competent service technician.
AH M-ONE.indd 3 2016-1-14 17:09:35
3: Controls and Connectors
Page 3
AH M-ONE.indd 4 2016-1-14 17:09:35
Loading...
+ 9 hidden pages