Hoher H32LX900HD Operating Instructions Manual

OPERATING INSTRUCTIONS

MODE D'EMPLOI

COLOUR TELEVISION WITH REMOTE CONTROL

TELEVISEUR COULEUR A TELECOMMANDE

H32LX900HD H32LX900HD

www.vestel-france.fr

English - 1 -

Contents

Features ................................................................. 2

Introduction ............................................................. 2

Preparation ............................................................. 2

Safety Precautions ................................................. 3

Package Contents .................................................. 4

Environmental Information ..................................... 5

Remote Control Buttons ......................................... 6

LCD TV and Operating Buttons .............................. 7

Viewing the Back side Connections ....................... 7

Viewing the Connections - Side Connectors .......... 8

Power Connection .................................................. 8

Aerial Connection ............................................... 8

Using Digital Multimedia Connectors...................... 9

USB Memory Connection ................................... 9

Connecting the LCD TV to a PC ............................. 9

Connecting to a DVD Player................................. 10

Using Side AV Connectors ................................... 10

Using Other Connectors ....................................... 10

Remote Control Handset ...................................... 10

Inserting Batteries ............................................. 10

Switching On/Off ....................................................11

To Switch the TV On ..........................................11

To Switch the TV Off ..........................................11

Digital Teletext (** for UK only) ..........................11

Analogue Teletext ..............................................11

Input Selection .......................................................11

Operation with the Buttons on the TV ................11

Volume Setting ...............................................11

Programme Selection ....................................11

Viewing Main Menu ........................................11

AV Mode ........................................................11

Operation with the Remote Control ...................11

Volume Setting ...............................................11

Programme Selection (Previous or Next

Programme) .................................................. 12

Programme Selection (Direct Access) .......... 12

First Time Installation............................................ 13

Auto Tuning .......................................................... 14

Auto Channel Scan Menu Operation ................ 14

Manual Tuning ..................................................... 14

Digital Manual Search....................................... 14

Analogue Manual Search ................................. 14

Analog Fine Tune.............................................. 14

Clear Service List (*) ......................................... 14

First Time Installation ........................................ 15

Managing Stations: Channel List .......................... 15

Operating the Channel List ............................... 15

Moving a Channel ............................................. 15

Deleting a Channel ........................................... 15

Renaming a Channel ........................................ 15

Locking a Channel ............................................ 15

Managing Stations: Favourites ............................. 16

Button Functions ............................................... 16

Managing Stations: Sorting Channel List ............. 16

On-Screen Information ......................................... 16

Media Playback Using Media Browser ................. 16

Viewing Videos via USB .................................. 17

Viewing Photos via USB ................................... 17

Media Browser Settings .................................... 18

Changing Image Size: Picture Formats ................ 18

Confi guring Picture Settings ................................. 19

Operating Picture Settings Menu Items ............ 19

Picture Settings Menu Items ............................. 19

PC Picture Settings........................................... 20

Confi guring Sound Settings .................................. 20

Operating Sound Settings Menu Items ............. 20

Sound Settings Menu Items.............................. 20

Confi guring Your TV’s Settings ............................. 21

Operating Settings Menu Items ........................ 21

Settings Menu Items ......................................... 21

Using a Conditional Access Module .....................21

Viewing Conditional Access Menu (*) ............... 21

Confi guring Language Preferences ...................... 21

Parental Control.................................................... 22

Parental Settings Menu Operation (*) ............... 22

Timers ................................................................... 23

Setting Sleep Timer .......................................... 23

Setting Programme Timers ............................... 23

Adding a Timer .............................................. 23

Editing a Timer .............................................. 23

Deleting a Timer ............................................ 23

Confi guring Date/Time Settings ............................ 23

Confi guring Source Settings ................................. 24

Confi guring Other Settings ................................... 24

Operation .......................................................... 24

Other Features ..................................................... 25

Teletext ................................................................. 25

Tips ....................................................................... 26

Appendix A: PC Input Typical Display Modes ....... 27

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 27

Appendix C: Supported DVI Resolutions.............. 28

Appendix D: Supported File Formats for USB

Mode..................................................................... 28

Appendix E: Software Upgrade ............................ 29

Specifi cations ....................................................... 30

Digital Reception (DVB-T) .................................... 30

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 101_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1 27.08.2010 17:13:3127.08.2010 17:13:31

English - 2 -

Features

Remote controlled colour LCD TV.•
Fully integrated Terrestrial digital TV (DVB-T - MPEG2) •

(DVB-T- MPEG4).
HDMI connectors for digital video and audio. This •

connection is also designed to accept high defi nition
signals.

USB input.•
1000 programmes (analogue+digital).•
OSD menu system.•
Integrated tuner DVB-T HD, MPEG 2 / MPEG 4 •

compatible.
Scart socket for external devices (such as video, •

video games, audio set, etc.).
Stereo sound system. (German+Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback. •
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input. •
Plug&Play for Windows 98, ME, 2000, XP, Vista.•
Game Mode.•

Introduction

Please read the corresponding instructions of this
handbook prior to the fi rst usage of the device, even
when the usage of electronic devices is familiar
to you. Notice especially the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.

Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly. Please do keep this
manual in a safe place for future references.

This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD

recorder,
VCR, PC etc.). This device is only suitable for the

operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modifi cations have been
made. To operate your LCD TV in extreme ambient
conditions may cause the damage of the device.

Preparation

For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.

10 cm

10 cm

10 cm

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 201_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 2 27.08.2010 17:13:3127.08.2010 17:13:31

English - 3 -

Safety Precautions

Read the following recommended safety
precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance by
pulling from the power cord and never touch the power
cord with wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or tie it with
other cords. The power cords should be placed in such a
way that they are not likely to be stepped on. A damaged
power cord can cause fi re or give you an electric shock.
When it is damaged and needs to be replaced, it should
be done by qualifi ed personnel.

Moisture and Water

Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with
liquids, such as fl ower vases, on top.
Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualifi ed personnel
before operating it any further.

Cleaning

Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use soft and dry
cloth.

Ventilation

The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.

Heat and Flames

The set should not be placed near to
open fl ames and sources of intense heat
such as an electric heater. Ensure that
no open fl ame sources, such as lighted
candles, are placed on top of the TV. Batteries should
not be exposed to excessive heat such as sunshine,
fi re or the like.

Lightning

In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specifi ed by the manufacturer or have the
same specifi cations as the original one. Unauthorized
substitutions may result in fi re, electrical shock or
other hazards.

Servicing

Please refer all servicing to qualifi ed
personnel. Do not remove the cover
yourself as this may result in an electric
shock.

Waste Disposal

Instructions for waste disposal:•

Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries, including those which are heavy metal-free,
should not be disposed of with household waste.
Please dispose of used battery in an environment
friendly manner. Find out about the legal regulations
which apply in your area.

• Don’t try to recharge batteries. Danger of explosion.
Replace batteries only with the same or equivalent
type.

This symbol on the product or on its packaging means
that your electrical and electronic device should be
disposed at the end of its service life
separately from your household wastes.
There are separate collection systems for
recycling in EU. For more information, please
contact the local authority or the dealer
where you purchased the product.

Disconnecting the Device

The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.

Headphone Volume

Excessive sound pressure from earphones
and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 301_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 3 27.08.2010 17:13:3227.08.2010 17:13:32

English - 4 -

LCD Screen

The LCD panel is a very high technology product with
about a million thin fi lm transistors, giving you fi ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fi xed blue, green or
red point. Please note that this does not affect the
performance of your product.

Warning! Do not leave your TV in standby or operating
mode when you leave your house.

Connection to a Television Distribution
System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fi re hazard.

Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).

Licence Notifi cation (Optional)

Manufactured under license from Dolby
Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.

The Standby / On button doesn´t separate this
device completely from mains. Moreover the device
consumes power in the standby operation. In order to
separate the device completely from mains, the mains
plug has to be pulled from the mains socket. Because
of that the device should be set up in a way, that an
unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately. To exclude the danger of fi re, the
power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.

Electrical device not in the hands of children

Never let children use electrical device unsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.

Package Contents

SCREEN

SCREEN

LANG

LANG

SUBTITLE

SUBTITLE

PIP

PIP

MENU

MENU

RETURN

RETURN

OK

OK

SOURCE

SOURCE

FAV

FAV

PRESETS

PRESETS

SLEEP

SLEEP

?

INFO

INFO

EPG

EPG

V+

V+

V-V-P-

P-

P+

P+

1

2

3

4

6

5

9

7 8

0

Remote

Control

LCD TV

Instruction Book

Note: You should check the accessories after
purchasing. Make sure that each accessory is
included.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 401_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 4 27.08.2010 17:13:3327.08.2010 17:13:33

English - 5 -

Environmental Information

This television is designed to consume less energy to save environment. •

You not only help to save the environment but also you can save money by reducing electricity bills thanks to the
energy effi ciency feauture of this TV. To reduce energy consumption, you should take the following steps:

You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, •
the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce •
energy consumption.

Disconnect power when going away for longer time.•
Note that annually, using the TV set in Power Save Mode has more power effi ciency than disconnecting the •

TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate
Power Save Mode setting to reduce your annual power consumption.And also it is recommended to disconnect
the TV from the mains plug to save energy more when you do not use.

Please helps us to save environment by following these steps.•

Repair Information

Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 501_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 5 27.08.2010 17:13:3427.08.2010 17:13:34

English - 6 -

Remote Control Buttons

Standby1.
Mono/Stereo - Dual I-II / Currrent Language (*) 2.

(in DVB channels)
Image size / Zooms videos (in Media Browser 3.

video mode)
Green buttonList Schedule(in EPG)/Tag/Untag 4.

All(in favourite list)/Play-Slideshow(in Media
Browser)

Red button/Stop(in Media Browser)5.
Numeric buttons6.
Teletext / Mix(in TXT mode) 7.
Cursor Left 8.
Menu on-off9.
AV / Source selection10.
Favourite Mode Selection(in DVB channels)11.
Volume Up12.
Info / Reveal (in TXT mode)13.
Mute14.
Volume Down15.
Programme Down / Page up(in DVB channels)16.
Electronic programme guide(in DVB channels)17.
Programme Up / Page down(in DVB channels)18.
Sleep Timer19.
Picture mode selecion. / Changes picture mode 20.

(in Media Browser video mode)
Okay (Confi rm) / Hold (in TXT mode)/ Edit 21.

Channel List
Cursor Down22.
Exit / Return / Index page (in TXT mode)23.
Cursor Right / Subpage (in TXT mode)24.
Cursor Up 25.
Previous programme26.
Yellow button/Pause (in Media Browser)/27.

Timeline Schedule(in EPG)
Blue button/Edit Channel List/Filter (İn Favourite 28.

List&EPG)/Loop-Shuffl e (in Media Browser)
No function29.
Subtitle on-off (in DVB channels)30.

V

V

SCREEN

SCREEN

LANG

LANG

SUBTITLE

SUBTITLE

PIP

PIP

MENU

MENU

RETURN

RETURN

OK

OK

SOURCE

SOURCE FAV

PRESETS

PRESETS

SLEEP

SLEEP

?

INFO

INFO

EPG

EPG

V+

V+

V-P-P-

P+

P+

1

2

3

4

6

5

9

7 8

0

V

8

9

10

11

15

28

29

12
13
14

16

17

27

26

25

20

23
22

21

19
18

1

2

3
4

5
6

7

24

30

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 601_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 6 27.08.2010 17:13:3427.08.2010 17:13:34

English - 7 -

LCD TV and Operating Buttons

FRONT and REAR VIEW Control buttons VIEW Control Buttons

1. Standby/On button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

Note: Press “

” and

buttons at the same time to view
main menu.

Viewing the Back side Connections

SCART 21. inputs or outputs for external devices.
SCART 1 2. input or output for external devices. Connect the SCART cable between SCART socket on

TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
Note: To connect external device,please use to supplied scart connection cable .

Component Video Inputs (YPbPr)3. are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.

PC/YPbPr Audio Inputs4. are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output
of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 701_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 7 27.08.2010 17:13:3527.08.2010 17:13:35

English - 8 -

outputs of your device to enable component audio.
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
RF Input6. connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

PC Input7. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC

HDMI 1: HDMI Input8.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of

displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.

HDMI 2: HDMI Input9.

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels 1.
that you subscribe to. For more information, see “Conditional Access” section.

Side USBs2.
Headphone jack is used for connecting an external headphone to the system. 3.

Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Video Input is used for connecting video signals of external devices.Connect the video 4.

cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. Connect the audio 5.

cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device.

Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains. Plug the power cable to the mains socket outlet.

Aerial Connection

Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•

5Vdc-Max500mA

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 801_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 8 27.08.2010 17:13:3727.08.2010 17:13:37

English - 9 -

Using Digital Multimedia
Connectors

You can connect USB devices to your TV by using •
the USB inputs of the TV. This feature allows you
to display/play JPG, MP3 and video fi les stored in
a USB stick.

It is possible that certain types of USB devices (e.g. •
MP3 Players) may not be compatible with this TV.

You may back up your fi les before making any •
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or data loss.

Do not pull out USB module while playing a fi le.•

CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.

SIDE VIEW USB MEMORY

USB Memory Connection

IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your

USB device to the USB inputs of the TV. You can
connect two usb device to your TV by using the USB
inputs of the TV at the same time.

Note: It is possible certain types of hard disk drives
are not supported.

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.

PC audio cable
(not supplied)

to AUDIO INPUTS

on the TV

PC RGB cable
(not supplied)
to PC input

Audio

Inputs

PC Input

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 901_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 9 27.08.2010 17:13:4027.08.2010 17:13:40

English - 10 -

Using Side AV Connectors

You can connect a range of optional equipment to
your LCD TV.

For connecting a camcorder, connect to the VIDEO •
IN socket and the AUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section “Input selection”
in the following parts.

To listen the TV sound from headphones, connect •
to the HEADPHONE jack of theTV.

Using Other Connectors

You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.

For connecting a to a device that has SPDIF support, •
use an appropriate SPDIF cable to enable sound
connection.

External Speakers

A device that

supports

SPDIF signal.

Remote Control Handset

Inserting Batteries

Remove the battery cover located on the back of •
the handset by gently pulling backwards from the
indicated part.

Insert two • AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.

+

+

-

-

Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.

Connecting to a DVD Player

If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.

Note: Cables shown in the illustration are not
supplied.

If your DVD player has an HDMI socket, you can •
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.

Most DVD players are connected through •
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.

You may also connect through the SCART 1 or •
SCART 2. Use a SCART cable as shown below.

Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.

HDMI

HDMI

inputs

Scart sockets

Component

video

inputs

Component

audio
inputs

DVD Player

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1001_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 10 27.08.2010 17:13:4127.08.2010 17:13:41

English - 11 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz. •
Press STANDBY touch button. Then the standby •

LED lights up.
To switch on the TV from standby mode either:•

Press the “•

” button, P+ / P- or a numeric button on

the remote control.
Press the • -P/CH or P/CH+ touch button on the TV. The

TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/
DOWN buttons on the remote control or on the TV
set, the programme that you were watching last will be
reselected.

By either method the TV will switch on.

To Switch the TV Off

Press the “• ” button on the remote control or press
the STANDBY touch button on the TV, so the TV will
switch to standby mode.

To power down the TV completely, unplug the •
power cord from the mains socket.

Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.

Digital Teletext (** for UK only)

Press the “• ” button.
The digital teletext information appears.•
Operate it with the coloured buttons, cursor buttons •

and OK button.

The operation method may differ depending on the
contents of the digital teletext.

Follow the instructions displayed on digital teletext
screen.

When Press “• SELECT” button or similar message
appears on the screen, press the OK button.

When the “•

” button is pressed, the TV returns to

television broadcasting.
With digital terrestrial broadcasting (DVB-T), in •

addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.

The aspect ratio (picture shape) when watching •
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.

When you press the “•

” button again, the digital

teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.

Input Selection

Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.

You can operate your TV using both the remote control
and onset buttons.

Operation with the Buttons on the TV
Volume Setting

Press “• ” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.

Programme Selection

Press “• P/CH +” button to select the next programme or
“P/CH -” button to select the previous programme.

Viewing Main Menu

Press the “• V+”/”V-” button at the same time to view
main menu. In the Main menu select sub-menu using
“AV” button and set the sub-menu using “

” or

“

” buttons. To learn the usage of the menus,

refer to the menu system sections.

AV Mode

Press the “• AV” button in the control panel on the TV
to switch between AV modes.

Operation with the Remote Control

The remote control of your TV is designed to control •
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.

Volume Setting

Press “• V+” button to increase the volume. Press “V-”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1101_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 11 27.08.2010 17:13:4227.08.2010 17:13:42

English - 12 -

Programme Selection (Previous or Next
Programme)

Press “• P -” button to select the previous
programme.

Press “• P +” button to select the next programme.

Programme Selection (Direct Access)

Press numeric buttons on the remote control to select •
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the fi rst digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.

Viewing Electronic Programme
Guide (EPG)

You can view the electronic programme guide (EPG)
to view information about available programmes.To
view the EPG menu please press GUIDE button on
the remote control.

Press “•

”/“ ” buttons to navigate through

channels.
Press “•

”/“ ” buttons to navigate through the

programme list.
EPG menu displays available information on all •

channels.
Please note that event information is updated •

automatically. If there are no event information
data available for channels, EPG will be displayed
with blanks.

OK (Options): Displays programme options including
“Select Channel” option.

INFO (Event Details): Displays the programmes in
detail.

Green button: Programme schedule will be listed
Yellow button: Display EPG data in accordane with

timeline schedule

Blue button (Filter): Views fi ltering options.

Red button (Prev Time Slice): Displays the

programmes of previous time slice.
Green button (Next Time Slice): Displays the

programmes of the next time slice.
Yellow button (Prev Day): Displays the programmes

of previous day.
Blue button (Next day): Displays the programmes

of the next day.
Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.
OK (Options): Displays programme options including

“Select Channel” option.

Text button (Filter): Views fi ltering options.
INFO (Details): Displays the programmes in detail.

Red button (Prev Day): Displays the programmes

of previous day.
Green button (Next day): Displays the programmes

of the next day.
Yellow button (Zoom): Expands programme

information.

Blue button (Filter): Views fi ltering options.
INFO (Details): Displays the programmes in detail.
Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.
OK (Options): Displays programme options including

“Select Channel” option.

Text (Search): Displays “Guide Search” menu.
SUBTTL: Press SUBTTL button to view Select

Genre menu. Using this feature, you can search the

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1201_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 12 27.08.2010 17:13:4227.08.2010 17:13:42

English - 13 -

programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.

(Now) : Shows the current programme.

First Time Installation

IMPORTANT: Ensure that the aerial is connected
and a Common Interface module is not inserted
before switching on the TV for the first time
installation.

When the TV is operated for the fi rst time, installation •
wizard will guide you through the process. First,
you will be asked to set and confi rm a PIN number.
Selected PIN number cannot be 0000. Enter a
PIN number and confi rm it by entering once more.
Press OK button to continue. If the two PIN numbers
match, your master PIN number will be set. Next,
language selection screen will be displayed:

Use “• ” or “ ” buttons to select your language
and press OK button to set selected language and
continue.

After selecting the language, “• Welcome!” screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.

By pressing “• ” or “ ” button, select the country
you want to set and press “ ” button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.

Press “•

” button after setting Teletext Language

option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.

Press • OK button on the remote control to continue
and the following message will be displayed on the
screen:

To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.

Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts

Note: You can press MENU button to cancel.

After all the available stations are stored, Channel •
List will be displayed on the screen. If you like the
sort channels, according to the LCN,please select
“Yes” and than press “OK”.

Press • OK button to quit channel list and watch TV.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1301_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 13 27.08.2010 17:13:4327.08.2010 17:13:43

English - 14 -

Auto Tuning

HINT: Auto tuning feature will help you to retune the TV
set in order to store new services or stations.

Press MENU button on the remote control and
select Installation by using “

” or “ ” button. Press

OK button and the following menu screen will be
displayed.

Select Automatic Channel Scan (Retune) by using “
”/“ ” button and press OK button. Automatic Channel

Scan (Retune) options will be displayed. You can
select Digital Aerial, Analog or Digital Aerial-Analogue
tuning using “ ”/“ ” and OK buttons.

Auto Channel Scan Menu Operation

Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analog stations.
Full: Searches and stores both analog and aerial

DVB stations.

Whenever you select an automatic search type and •
press OK button, a confi rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“

” or “ ” and

OK button.
After auto channel scan type is set and selected •

and confi rmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast
entry.

Select • Manual Channel Scan from the Installation
menu by using “

”/“ ” and OK buttons. Manual

Scan options screen will be displayed.
Select the desired • Search Type using “

” or “

” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press MENU button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use
“ ”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.

Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analog Fine Tune

Select • Analog Fine Tune from the Installation menu
by using “ ” or “ ” and OK buttons. Analog fi ne tune
screen will be displayed. Analog Fine Tune feature
will not be available if there are no analog channels,

digital channels and external sources stored.
Press • OK button to proceed. Use “

” or “ ” button

to set Fine Tune. When fi nished, press OK button
again.

Clear Service List (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “

” or

“ ” button to select Clear Service List and then press

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1401_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 14 27.08.2010 17:13:4327.08.2010 17:13:43

English - 15 -

OK. The following OSD message will be displayed
on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ”
button and press OK to delete all of the channels.

First Time Installation

Select First Time Installation line and press OK button.
Enter the PIN number you have previously set during
the fi rst time installation. If the correct PIN number is
entered, installation process will start.

See the section, “First Time Installation” at the
beginning of instruction book for more information
on the process.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.

Press • MENU button to view main menu. Select
Channel List item by using “

” or “ ” button. Press

OK to view menu contents.

Select Edit Channel List to manage all stored
channels. Use “ ” or “ ” and OK buttons to select
Edit Channel List.

Operating the Channel List

Press “• ” or “ ” button to select the channel that
will be processed. Press “ ” or “ ” button to select
a function on Channel List menu.

Use • P+/P- buttons to move page up or down.
Press • BLUE button to view fi ltering options.
Press • MENU button to exit.

Moving a Channel

First select the desired channel. Select Move option •
in the channel list and press OK button.

Edit Number screen will be displayed. Enter the •
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
will be displayed. Select Yes if you want to move the
channel and press OK.

Press • OK button to process. Selected channel is
now moved.

Deleting a Channel

You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.

Select the channel that you want to delete and select •
Delete option. Press OK button to continue.

A warning screen will appear. Select • YES to delete,
select No to cancel. Press OK button to continue.

Renaming a Channel

Select the channel that you want to rename and •
select Edit Name option. Press OK button to
continue.

Pressing “•

” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.

When fi nished, press • OK button to save. Press

MENU to cancel.

Locking a Channel

You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.

Select the channel that you want to lock and select •
Lock option. Press OK button to continue.

You will be asked to enter parental control PIN that •
you have previously defi ned during the fi rst time
installation. Enter the PIN number.

Press • OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1501_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 15 27.08.2010 17:13:4427.08.2010 17:13:44

English - 16 -

Managing Stations: Favourites

You can create a list of favourite programmes.

Press • MENU button to view main menu. Select
Channel List item by using “

” or “ ” button. Press

OK to view menu contents.
Select • Favourites to manage favourite list. Use “

”/“ ” and OK buttons to select Favourites.
You can set various channels as favourites so that •

only the favourite channels are navigated.

Select a channel by using “• ” or “ ” button. Press
OK button to add selected channel to favourites list.
Press OK button again to remove.

Button Functions

OK• : Add/remove a station.
YELLOW• : Tag/untag a channel.
GREEN• : Tag/untag all channels.
BLUE• : Displays fi ltering options.

Managing Stations: Sorting
Channel List

You can select broadcasts to be listed in the channel
list. To display specifi c types of broadcast, you should
use Active channel list setting.

Select Active channel list from the Channel list
menu by using “

” or “ ” button. Press OK button

to continue.

You can select a broadcast type option from the list
by using “ ” /“ ” and OK buttons.

On-Screen Information

You can press INFO button to display on-screen
information. Details of the station and current

programme will be displayed on the information
banner.

The information banner gives information on the
channel selected and the programmes on it. The name
of the channel is displayed, along with its channel
list number.

Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.

If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(If you have forgotten the PIN number you have set
during the fi rst time installation, you should use the
master PIN code, 4725.). “Enter PIN” will be displayed
on the screen in such a case:

Media Playback Using Media
Browser

If the USB stick is not recognized after power off/on
or First Time Installation, fi rst, plug the USB device
out and power off/on the TV set. Plug the USB device
in again.

To display Media Browser window, press either
“MENU” button on the remote control and then select
Media Browser by pressing “

” or “ ” button. Press

OK button to continue. Media Browser menu options
will be displayed.

Also, when you plug USB devices, media browser
screen will be displayed automatically:

You can play music, picture and video fi les from the
connected USB memory stick. Use “ ” or “ ” button
to select Videos, Photos, Music or Settings.

You can connect two USB devices to your TV. If both
USB devices include music, picture or video fi les, USB
selection osd will be displayed on the screen. The
fi rst USB device connected to the TV will be named
as USB Drive1.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1601_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 16 27.08.2010 17:13:4527.08.2010 17:13:45

English - 17 -

Select a device by using “ ” or “ ” button and press
OK.

Viewing Videos via USB

When you select Videos from the main options,
available video fi les will be fi ltered and listed on this
screen. You can use “ ” or “ ” button to select a video
fi le and press OK button to play a video. If you select
a subtitle fi le and press OK button, you can select or
deselect that subtitle fi le. The following menu will be
displayed while playing a video fi le:

Play (RED button): Starts the video playback.
Stop (BLUE button): Stops the video playback.
Pause (OK button): Pause the video playback.
Rewind (

button): Goes backward.

Forward (

button): Goes forward.
Subtitle/Audio (LANG. button): Sets subtitle/Audio.
Yellow: Opens subtitle time correction menu

Press RETURN (Exit) button to switch back to
previous menu.

Viewing Photos via USB

When you select Photos from the main options,
available image fi les will be fi ltered and listed on this
screen.

Jump (Numeric buttons):Jump to selected fi le using
the numeric buttons.

OK: Views the selected picture in full screen.
Slideshow (GREEN button): Starts the slideshow

using all images.
Loop/Shuffl e (BLUE button): Press once to enable

Loop. Press again to enable both Loop and Shuffl e.
Press once more to enable only Shuffl e. Press again
to disable all. You can follow the disabled functions
with the change of the icons.

FAV: Sorts fi les by date.
TEXT: Views images in thumbnails.
INFO: Changes fi lter options.
Slideshow Options

Pause (YELLOW button) : Pauses the slideshow.
Continue (GREEN button) : Continues the

slideshow.
Previous/Next (Left/Right buttons): Jumps to

previous or next fi le on slideshow.
Rotate (Up/Down buttons): Rotates the image using

up/down buttons.
Loop/Shuffl e (BLUE button): Press once to disable

Loop. Press again to disable both Loop and Shuffl e.
Press once more to enable only Shuffl e. Press again
to enable all. You can follow the disabled functions
with the change of the icons.

RETURN (Exit): Back to fi le list.
INFO: Displays help screen.

Viewing Music via USB

When you select Music from the main options,
available audio fi les will be fi ltered and listed on this

screen.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1701_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 17 27.08.2010 17:13:4527.08.2010 17:13:45

English - 18 -

0..9 (Numeric buttons): Jumps to the selected fi le.
Play This (OK button) : Plays the selected fi le.
Play (GREEN button) : Plays all media fi les starting

with the selected one.

Stop (RED button) : Stops playback.
Pause (YELLOW button) : Pauses the selected

playback.
Previous/Next (Left/Right buttons) : Jumps to

previous or next fi le to play.

FAV: Sorts fi les by Title,Artist or Album..
INFO: Changes fi lter options.
Loop/Shuffl e (BLUE button): Press once to disable

Loop. Press again to disable both Loop and Shuffl e.
Press once more to enable only Shuffl e. Press again
to enable all. You can follow the disabled functions
with the change of the icons.

Media Browser Settings

You can set your Media Browser preferences by
using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.

View Style: Sets default browsing mode.
Slide Show Interval: Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
Subtitle Position: Sets subtitle position as up or

down.
Subtitle Font Size: Sets subtitle font size (max.

54pt).

Changing Image Size: Picture
Formats

Programmes can be watched in different picture •
formats, depending on the transmission received.

You can change the aspect ratio (image size) of •
the TV for viewing the picture in different zoom
modes.

Press • SCREEN button repeatedly to change
the image size. Available zoom modes are listed
below.

Auto

When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.

When the • AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.

16:9

This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fi ll the wide TV
screen.

For 16:9 aspect ratio pictures that have been •
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.

Subtitle

This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.

Note: You can shift to screen up or down by pressing
“ ” / “ ” buttons while picture zoom is selected as
panaromic, 14:9 Zoom, Cinema or Subtitle.

01_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 1801_MB61_[GB]_3900UK_IDTV_BRONZE16_32875W_(power save mode)_10068780_50173468.indd 18 27.08.2010 17:13:4627.08.2010 17:13:46