Description of Transmitter
1. PRIMARY FUNCTION
- Remote door lock/unlock/panic/tail gate
- Operating distance : 10 m over
- Id input(setting mode)
2. ELECTRICAL CHARACTERISTICS
model name RKE-3F05
Operating voltage 3 VDC
Consumption current Max 15 mA
TRANSMITTER
Operating frequency
Power 75 dBuV/m under
Sensitivity -
Operating temperature -20 ~ +60 ℃
ETC FM modulation
315 ㎒
3. OPERATING DIAGRAM
1) TRANSMITTER
A) DATA FRAME
B) DATA FORMAT
C) TRANSMISSION SPECIFICATION
- BAUD RATE : 1kbps
- CODING METHOD : MANCHESTER
- TRANSMISSION BIT COUNT : 380Bit
- TRANSMISSION TIME : 380ms±15%
LOGIC "1"LOGIC "0"
MAP DATABASE HOTLINE
M & SOFT AMERICA MAP CENTER
TEL : 888-757-0010
WEBSITE : www.mapnsoft.com
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC R ules. These limits ar e des igned to pr ovide r easonable pr otection against harmf ul interf erence
in a r esidential installation. This equipm ent gener ates, u ses and can r adiate r adio f requency e nergy and,
if not insta lled and used in accor dance with the instructions, ma y cause harmf ul interf erence to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment of f and on, t he user is encour aged to tr y to corr ect th e interf erence by one or more of th e
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: An y c hanges or modifications to this device not explicitly appr oved by ma nufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any inter ference received, including
interference that may cause undesired operation.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two c onditions: (1 ) this device ma y not caus e interfer ence, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Loading...