HYUNDAI MOBIS PA760SLGGB User Manual

FCC ID: TQ8-PA760SLGGB / IC: 5074A-PA760SLGGB

ATTACHMENT E.

- User Manual -

HCT CO., LTD.

SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA

TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr

Report No. : HCTR1005FR15 1/1

Features of your vehicle

D300800AHM

How vehicle audio works

AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle.This signal is then received by the radio and sent to your vehicle speakers.

When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridges or other large obstructions in the area.

AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around obstructions so that they can provide better signal coverage.

JBM002

AM reception

JBM001

FM reception

¢¢¢

Features of your vehicle

FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station.

Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble:

• Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station.

• Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can disturb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears.

• Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.

• Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed.

JBM005

JBM004JBM003

FM radio station

¢¢¢

Features of your vehicle

Using a cellular phone or a two-way radio

When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment.

Care of discs

• If the temperature inside the vehicle is too high, open the vehicle windows for ventilation before using your vehicle audio.

• It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means.

• Do not apply volatile agents such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs.

• To prevent the disc surface from getting damaged. Hold and carry CDs by the edges or the edges of the center hole only.

• Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).

• Do not damage the disc surface or attach pieces of sticky tape or paper onto it.

• Make sure objects other than CDs are not inserted into the CD player (Do not insert more than one CD at a time).

• Keep CDs in their cases after use to protect them from scratches or dirt.

• Depending on the type of CD-R/CDRW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your vehicle audio system.

✽✽

NOTICE - Playing an

Incompatible Copy Protected Audio CD

Some copy protected CDs, which do not comply with the international audio CD standards (Red Book), may not play on your vehicle audio. Please note that if you try to play copy protected CDs and the CD player does not perform correctly the CDs maybe defective, not the CD player.

WARNING

Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone.

Features of your vehicle

SL_PA710_CDP_GEN / SL_PA760_CDC_GEN

■■

CD Player : PA710SLG

■■

CD Changer : PA760SLG

❋There will be no logo if the Bluetooth®feature is not supported.

Features of your vehicle

Using RADIO, SETUP, VOLUME and AUDIO CONTROL

1. Button

Turns to FM mode and toggles FM1and FM2 when the button is pressed each time.

2. Button

Pressing the [AM] button selects the AM band. AM Mode is displayed on the LCD.

3. Button & Knob

Turns on/off the set when the IGNITION SWITCH is on ACC or ON. If the button is turned to the right, it increases the volume and left,decreases the volume.

• Adjusts the volume of the car audio system. Rotate clockwise to increase the volume or counterclockwise to decrease.

4. Button

• When the button is pressed, it increases the band frequency to automatically select channel. Stops at the previous frequency if no channel is found.

• When the button is pressed, it reduces the band frequency to automatically select channel. Stops at the previous frequency if no channel is found.

5. Button

• When the button is pressed, it automatically scans the radio stations upwards.

• The SCAN feature steps through each station, starting from the initial station, for 5 seconds.

• Press the button again to stop the scan feature and to listen to the currently selected channel.

6. Button(AUTO STORE)

When the button is pressed, it automatically selects and saves channels with high reception rate to PRESET buttons

~ and plays the channel saved in PRESET1. If no channel is saved after AST, it will play the previous channel.

7. PRESET Buttons

Push ~ buttons less than

0.8 second to play the channel saved in each button. Push Preset button for 0.8 second or longer to save current channel to the respective button with a beep.

AST

SCAN

SEEK

VOLPOWER

PA760SLG_RADIO

Features of your vehicle

8. Button

Turn ON/OFF the displayed data and light on LCD.

When LCD Display is turned OFF, Press ant button to turn ON display.

9. Button

■ CD Player : PA710SLG Press this button to turn to the SETUP

adjustment mode.

If no action is taken for 5 seconds after pressing the button, it will return to the play mode. (After entering SETUP mode, move between items using the left, right and PUSH functions of the knob.)

The setup changes in the order of Scroll ➟ SDVC ➟ P.Bass ➟ Media ➟ Scroll...

■ CD Changer : PA760SLG The setup Change in the order of

Scroll ➟ SDVC ➟ ➟ Media ➟ Scroll...

• Scroll This function is used to display charac-

ters longer than the LCD text display and can be turned On/Off through the sound quality control knob.

• SDVC (Speed Dependent Volume Control) This function automatically adjusts the

volume level according to the speed of the vehicle and can be turned On/Off through the sound quality control knob.

• P.Bass (Power Bass) Based on psychoacoustic technology, this

technology overcomes Bass limitations which may occur due to the limited number and size of speakers to offer dynamic BASS sound quality. It is possible to adjust in 3 levels of LOW/MID/HIGH.

Off

➟ Low ➟ Mid ➟ High

❈ AM mode is not supported.

TUNE

SETUP

DISP

PA760SLG_RADIO

+ 16 hidden pages