HYUNDAI MOBIS PA760BKCBXD User Manual

FCC ID : PINPA760BKCBXD

ATTACHMENT H.

- Hardware Manual -

HCT CO., LTD.

SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA

TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr

Report No. : HCT-R08-128 1/1

yhkpvSGzl{|wSG}vs|tlGjvu{yvsOwh^XWirsSG|zhP

1. FM/AM selection button

2. SEEK ୸ / ୹ button

3. POWER on/off & volume control knob

4. SCAN button

5. Display

6. Preset channel button

7. SETUP Button

8. TUNE FILE UP/DOWN button

9. CD / AUX selection button

10. XM selection button

11. DISP selection button

1. FM/AM selection Button

Turn to FM or AM mode, and toggles in the order of FM1˧ FM2˧AM˧FM1... when the button is pressed each time.

2. SEEK ୸ / ୹ Button

When the [SEEK ୸ / ୹] button is pressed, it increases / decreases the band frequency by 200kHz to automatically select channel. Stops at the previous frequency if no channel is found.

3. POWER on/off & volume control button

Turn on/off the set When the IGNITION SWITCH is on ACC or ON. If the button is turned to the right, it increases the volume and left, decreases the volume.

will play the frequencies for 5 seconds (XM MODE: 10 seconds) each and find other broadcasts as the frequency increases. Press the button again when desiring to continue listening to the currently playing broadcast.

5. Display

Display currently time, mode, frequency SCAN status and preset channel.

6. Preset channel button

Press [1] ~ [6] buttons less than 0.8 second to play the channel saved in each button. Press preset button for 0.8 second or longer to save current channel to the respective button with a beep

8. TUNE FILE ୸ / ୹ button

When the [TUNE ୸ / ୹] button is pressed, it increases / decreases the band frequency by 200kHz from current frequency.

9. CD/AUX selection button

If there is a CD in the CDP DECK it turns to CD mode, and if a device is connected to AUX then it toggles.

CD ˧ AUX ˧ CD… when the button is pressed each time. (It will not turn to AUX if the auxiliary device is not connected)

10. XM selection button

When this button is pressed, the mode turns to XM satellite Radio.

4. SCAN Button

If this button is pressed, the frequencies will become increased and receive the corresponding broadcasts. This function

7. SETUP Button

Pressing the button changed the CLOCK, TONE, POSITION, AVC, TEMP, SCROLL AND BLUETOOTH.

11. DISP selection button

Turns on/off the displayed data and light on LCD

jkwOwh^XWirsSG|zhP

1. RDM Play button

2. RPT button

3. CD Loading Slot

4. CD Eject button

5. TRACK ୸ / ୹ button

6. SEEK ୸ / ୹ button

7. XM Selection button

8. SCAN Play button

9. Display

10. CD Indicator

11. CAT FOLDER ୸ / ୹ button

12. TUNE FILE ୸ / ୹ button

13. INFO button

1. RDM Play Button

message will appear and CD will be ejected.

7. XM selection button

Turns on/off the randomization of the play list of files in the currently played DISC. To cancel the mode, press the button once again.

If loaded CD has a file folder, RANDOM PLAY button operates below

- Press button for less than 0.8 second to

play randomized files in folder

- Press button for 0.8 second or longer to

play randomized all files in CD

2. RPT Button

Repeats current song when the button is pressed for less than 0.8 second. Repeats the entire DISC when the button is pressed for 0.8 second or longer

3. CD Loading Slot

Please face printed side upward and gently Press in. When the ignition switch is on ACC or ON and power is off, power is automatically turned on if the CD is loaded. This CDP supports only 12cm CD. If VCD, Data CD are loaded, “Reading Error”

4. CD Eject Button

Press  button to eject the CD during CD playback. This button is enabled when ignition switch is off.

5. TRACK ୸ / ୹ Button

-Press TRACK ୸ button to play the next song.

- Press TRACK ୹ button to play from the beginning of current song and Press again to play the previous song.

6. SEEK ୸ / ୹ Button

- Press SEEK ୸ button to initiate high speed sound search of current song.

- Press SEEK ୹ button to initiate reverse direction high speed sound search of current song

When this button is pressed, the mode turns to XM satellite Radio

8. SCAN play button

Play first 10 seconds of each song in the DISC. To cancel the mode, press the button once again

9. Display

Display currently time, mode, play track number, play time, RDM, RPT and SCAN status.

10. CD indicator

When car ignition switch is ACC or ON and if the CD is loaded, this indicator is lighted. If the CD is ejected the light is turned off.

11. CAT FOLDER ୸ / ୹ Button

13. INFO button

When loaded CD has file folders, FOLDER ୸ / ୹ button operates below

Press FOLDER ୹ button to move child folder of the current folder and displays the first song in the folder. Press ENTER button to move to the folder displayed. It will play the first song in the folder. Press FOLDER ୸ button to move parent folder and displays the first song in the folder. Press ENTER button to move to the folder displayed.

12. TUNE FILE ୸ / ୹ BUTTON

When loaded CD has a mp3 or WMA files , TUNE FILE ୸ / ୹ button operates below

Press TUNE FILE ୸ button to play next song Press TUNE FILE ୹ button to play previous song

Displays the information of the current CD TRACK in the order of DISC TITLE ˧ DISC ARTIST ˧ TRACK TITLE ˧ TRACK ARTIST ˧ TOTAL TRACK ˧ play screen ˧ DISC TITLE ˧ …(not displayed if the information is not available on the DISC.)

|zpunG|ziOwh^XWirsSG|zhP

1. RDM Play button

2. RPT button

3. TRACK ୸ / ୹ button

4. SEEK ୸ / ୹ button

5. CD / AUX selection button

6. SCAN play button

7. Display

8. FOLDER ୸ / ୹ button

9. TUNE FILE ୸ / ୹ button

10. INFO button

1. RDM Play Button

4. SEEK ୸ / ୹ button

8. FOLDER ୸ / ୹ button

Press the button for less than 0.8 second to start or stop the random playback of the songs in the current folder. Press the button for more than 0.8 second to randomly play the entire songs in the USB device. Press the button again to cancel the mode

2. RPT Button

Press the button for less than 0.8 second to repeat the song currently played. Press the button for more than 0.8 second to repeat the entire songs in the USB device.

3. TRACK ୸ / ୹ button

Press the TRACK ୹ button to play from the beginning of the song currently played. And press it again to move and play the previous track. Press the TRACK ୸ button to move to the next track.

Press the SEEK ୹ button to play the song in reverse direction in fast speed Press the SEEK ୸ button to play the song in forward direction in fast speed

5. CD / AUX selection button

If USB is connected, it switches to the USB mode from the CD mode to play the song files stored in the USB. If there are no CD and USB mode from the Radio mode, it displays “No Media”.

6. SCAN play button

Plays 10 seconds of each song in the USB device. Press the button once again to cancel scanning.

7. Display

Display currently time, mode, play track number, play time, RDM, RPT and SCAN status.

9. TUNE FILE ୸ / ୹ button

Press the TUNE FILE ୹ button to play from the beginning of the song currently played. And press it again to move and play the previous track. Press the TUNE FILE ୸ button to move to the next track.

10. INFO button

Displays the information of the file currently played in the order of FILE NAME ˧ TITLE ˧ ARTIST ˧ ALBUM ˧ FOLDER ˧ TOTAL FILE ˧ NORMAL DISPLAY ˧ FILE NAME ˧ …(Displays no information if the file has no song information)

y|uupunGw Owh^XWirsSG|zhP

1. RDM Play button

2. RPT button

3. TRACK ୸ / ୹ button

4. SEEK ୸ / ୹ button

5. CD / AUX selection button

6. SCAN play button

7. Display

8. FOLDER ୸ / ୹ button

9. TUNE FILE ୸ / ୹ button

10. INFO button

iPod is a trademark of Apple Inc.

1. RDM Play Button

4. SEEK ୸ / ୹ button

8. FOLDER ୸ / ୹ button

Press the button for less than 0.8 second to to activate or deactivate the random playback of the songs within the current category. Press the button for longer than

0.8 second to randomly play all songs in the entire album of the iPod. Press the button once again to cancel the mode.

2. RPT Button

Press the button for less than 0.8 second to repeat the song currently played. Press the button for more than 0.8 second to repeat the entire songs in the iPod.

3. TRACK ୸ / ୹ button

Press the TRACK ୹ button to play from the beginning of the song currently played. And press it again to move and play the previous track. Press the TRACK ୸ button to move to the next track.

Press the SEEK ୹ button to play the song in reverse direction in fast speed Press the SEEK ୸ button to play the song in forward direction in fast speed

5. CD / AUX selection button

If iPod is connected, it switches to the iPod mode from the CD mode to play the song files stored in the iPod. If there are no CD and AUX mode from the Radio mode, it displays “No Media”.

6. SCAN play button

Plays 10 seconds of each song in the iPod device. Press the button once again to cancel scanning.

7. Display

Display currently time, mode, play track number, play time, RDM, RPT and SCAN status.

Press FOLDER ୹ button to move the category and displays the first song in the category. Press ENTER button to move to the category displayed. It will play the first song in the folder. Press FOLDER ୸ button to move the category and displays the first song in the category. Press ENTER button to move to the category displayed.

9. TUNE FILE ୸ / ୹ button

10. INFO button

Displays the information of the file currently played in the order of TITLE ˧ ARTIST ˧ ALBUM ˧ NORMAL DISPLAY ˧ TITLE ˧ …(Displays no information if the file has no song information)

+ 25 hidden pages