HYUNDAI MOBIS AC110ENGG User Manual

Hyundai MOBIS Car Audio Manual

Knowing your Vehicle

How vehicle audio works AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna

on your vehicle. This signal is then received by the radio and sent to your vehicle speakers.

When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in

some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the distance from the radio station, closeness of

other strong radio stations or the presence of buildings, bridges or other large obstructions in the area.

AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low

frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around

obstructions so that they can provide better signal coverage.

FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at

short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening

conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble:

• Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you

select another stronger station.

• Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can disturb the signal causing static or fluttering noises

to occur. Reducing the treble level may lessen this effect until the disturbance clears.

• Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is

designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.

• Multi-Path Cancellation - Radio signals being received from several directions can cause distortion or fluttering. This can be caused by a direct and reflected

signal from the same station, or by signals from two stations with close frequencies. If this occurs, select another station until the condition has passed.

Hyundai MOBIS Car Audio Manual

Using a cellular phone or a two-way radio

When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the

audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment.

Care of discs

• If the temperature inside the vehicle is too high, open the vehicle windows for ventilation before using your vehicle audio.

• It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means.

• Do not apply volatile agents such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs.

• To prevent the disc surface from getting damaged. Hold and carry CDs by the edges or the edges of the center hole only.

• Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).

• Do not damage the disc surface or attach pieces of sticky tape or paper onto it.

• Make sure objects other than CDs are not inserted into the CD player (Do not insert more than one CD at a time).

• Keep CDs in their cases after use to protect them from scratches or dirt.

• Depending on the type of CD-R/CDRW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording

methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your vehicle audio system.

✽ NOTICE - Playing an Incompatible Copy Protected Audio CD

Some copy protected CDs, which do not comply with the international audio CD standards (Red Book), may not play on your vehicle audio. Please note that if

you try to play copy protected CDs and the CD player does not perform correctly the CDs maybe defective, not the CD player.

Hyundai MOBIS Car Audio Manual

Using RADIO, SETUP, VOLUME AUDIO CONTROL

1. “FM” Button

Turns to FM mode and toggles FM1and FM2 when the button is pressed each time.

2. “AM” Button

Pressing the button selects the AM band. AM Mode is displayed on the LCD.

3. “SEEK” Button

• When the button is pressed, it increases the band frequency to automatically select channel. Stops at the previous frequency if no channel is found.

• When the button is pressed, it reduces the band frequency to automatically select channel. Stops at the previous frequency if no channel is found.

4. “AST” Button(AUTO STORE Button)

When the button is pressed, it automatically selects and saves channels with high reception rate to PRESET buttons

1~6 and plays the channel saved in PRESET1. If no channel is saved after AST, it will play the previous channel.

• When the button is pressed for longer than 0.8 second, it automatically scans the radio preset station upwards.

• Press the button again to stop the scan feature and to listen to the currently selected channel.

5. Knob

If the knob is turned clockwise/counterclockwise, the volume will increase/decrease.