Hyundai IBT L22C0E081 User Manual

Type No. L22C0E081

Model. W223D

Multi Function Wide Monitor

User’s Guide

U.S.A.

U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.

Contents

W223D Multi Function Wide Monitor

1. Introduction ........................................1/26

2. Safety Information .............................1/26

3. Installing the monitor ........................4/26

3-1. Packing List .............................................4/26

3-2. Selecting a suitable location .................5/26

3-3. Connecting the PC ..................................5/26

3-4. Setting the refresh rate ..........................9/26

Preset Timing Table .............................................10/26

3-5. Watching the DVD/HDTV .....................11/26

3-6. User’s Environment ..............................12/26

4. Adjusting the picture .......................14/26

4-1. Using the On Screen Display ..............15/26

4-2. Direct access buttons ............................15/26

4-3. OSD Adjustments .................................16/26

5. Display power

Reducing power consumption ...................................22/26

6. Troubleshooting ...............................23/26

7. Speciﬁcations ...................................26/26

management ............. 22/26

W223D Multi Function Wide Monitor

1. Introduction

2. Safety Information

This manual contains instructions for installing and operating HYUNDAI IT CORP. W223D.

HYUNDAI IT CORP. W223D is a highly ergonomic color display unit.

• 22” Viewable WSXGA+ LCD

• High quality screen re-scaling capability

• 100-240V AC input voltage

• VESA DPMS (Display Power Management Signaling)

• VESA DDC1/2B compatibility

• Advanced digital On-Screen-Display controls

• Digital Signal Input by DVI-1.0 Compatibility

• HDMI Signal Input by HDMI-1.3 Compatibility

• Fast and accurate auto adjustment

• Most advanced image scaling

• Supporting VESA Flat Panel Monitor Physical Mounting Interface

This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:

Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inﬂammable materials.

1/25

W223D Multi Function Wide Monitor

Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~40°C Humidity : 30~80RH

Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected.

Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or ﬁre. Call your service technician for replacement.

Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.

Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.

2/25

W223D Multi Function Wide Monitor

Apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

Shall be connected to a MAINS socket outlet with a protective earth connection.

The disconnected device shall remain readily operable.

Cleaning and Maintenance

• To avoid to risk of electric shock, do not disassemble the Cabinet of display unit. The Cabinet is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning.

• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.

• Do not wipe the screen with a cloth or sponge that could scratch the surface.

• To clean your antistatic screen, use water and a special microﬁber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent.

• If the instructions above do not help in removing stains, contact an authorized service agent.

3/25

W223D

Multi Function Wide Monitor

3. Installing the monitor

3-1. Packing List

The following items should be found in the packaging.

Power Cord

Signal Cable

DVI Cable

Audio Cable

America/Canada Europe

South Africa Australia

UK Japan

Korea

HDMI Cable

(Option)

Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition.

USB Cable

(Option)

Compact Disc

4/25

W223D

Multi Function Wide Monitor

3-2. Selecting a suitable

location

3-3. Connecting the PC

• 15 pin D-sub / DVI-D / HDMI

• Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation.

• Place the monitor in a position where no light shines directly onto or is reﬂected on the screen.

• To reduce eye strain, avoid installing the display unit against a bright background such as a window.

• Position the monitor so that the top of the screen is no higher than eye level.

• Position the monitor directly in front of you at a comfortable reading distance. (around 45 to 90cm)

Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets.

1. Insert the other 15-pin/DVI-D/HDMI signal cable connector into the 15-pin VGA/DVI-D/ HDMI connection on your computer and screw it down.

When using DVI to HDMI cable connection, you must use audio connection and set “DVI to HDMI

AUDIO” menu to On.

2. Plug the power cord connection to connection on the monitor.

3. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet.

4. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide.

5/25

W223D Multi Function Wide Monitor

• Way to Connect

5. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section adjusting the picture in this guide for more information.

6/25

+ 19 hidden pages