Hyundai IBT L15A0C063 User Manual

Type No. L15A0C063

Click

www.hyundaiQ.com

ImageQuest L50S

TFT LCD Color Monitior

NEXT

User’s Guide

U.S.A.

BACK

U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

NEXT

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

DECLARATION OF CONFORMITY

BACK

WE ImageQuest CO., LTD.

Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:

Kind of equipment : COLOR MONITOR

Type-Designation :

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)

Safety : EN 60950 : 1992 + A1, A2, A3, A4, A11
EMC : EN 55022 : 1998, EN 55024 : 1998

EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998
EN 61000-3-3 : 1995

following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.

L15A0C063

NEXT

Accredited testlaboratory:

TÜV Rheinland

Am Grauen Stein

51105 Köln

KOREA / Jan. 15, 2003 HONG KI, KIM

(Place and date of issue) (Name and signature of

authorized person)

L50S

BACK

Contents

15

1. Introduction ...................................1/22

2. Safety Information ........................1/22

3. Installing the monitor ...................4/22

3-1. Packing List .........................................4/22

3-2. Instructions to Install the Stand ........5/22

3-3. Selecting a suitable location ..............6/22

3-4. Connecting the monitor .....................6/22

3-5. Setting the refresh rate ......................9/22

3-6. User’s Environment ...........................11/22

" TFT LCD Color Monitor

Preset Timing Table ..........................10/22

NEXT

4. Adjusting the picture ..................13/22

4-1. Using the On Screen Display ...........14/22

4-2. Direct access buttons .......................14/22

4-3. OSD Adjustments .............................15/22

5. Display power management ......18/22

Reducing power consumption ..............18/22

6. Troubleshooting ..........................19/22

7. Specifications ..............................22/22

L50S

BACK

1. Introduction

2. Safety Information

15

This manual contains instructions for installing and operating ImageQuest L50S.

ImageQuest L50S is a highly ergonomic color display unit.

• 15" viewable SXGA LCD

• High quality screen re-scaling capability

• 100-240V AC input voltage

• VESA DPMS (Display Power Management Signaling)

• VESA DDC1/2B compatibility

• Advanced digital On-Screen-Display controls

• Fast and accurate auto adjustment

• Most advanced image scaling

• Supporting VESA Flat Panel Monitor Physical Mounting Interface

This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind
the following:

" TFT LCD Color Monitor

NEXT

Do not place anything wet on the monitor or the power
cord. Never cover the ventilation openings with any
material and never touch them with metallic or
inflammable materials.

1/22

L50S

BACK

15

Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~35°C
Humidity : 30~80RH

Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.

" TFT LCD Color Monitor

Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.

NEXT

Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.

Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.

2/22

L50S

BACK

Cleaning and Maintenance

15

• To avoid risk of electric shock, do not disassemble the display unit cabinet. The

• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not

• Do not wipe the screen with a cloth or sponge that could scratch the surface.

• To clean your antistatic screen, use water and a special microfiber screen

• If the instructions above do not help in removing stains, contact an authorized

" TFT LCD Color Monitor

unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.

use thinner or benzene, abrasive cleaners or compressed air.

cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.

service agent.

NEXT

3/22

L50S

UK

America/Canada

Japan

Australia

Korea

Europe

South Africa

BACK

3. Installing the
monitor

3-1. Packing List

15

The following items should be found in the packaging.

" TFT LCD Color Monitor

Power Cord

Signal Cable

Main Unit Body

Audio Cable

(Option)

NEXT

Above power cord can be changed upon different voltage areas. Please

!

contact your dealer if anything is missing or damaged.
Other power cord except the cord packed in the product or longer than 3m

may affect EMC of the product in operating condition.

Compact DiscStand Base

4/22