Hyundai IBT C19R06092 User Manual
FCC ID : PJIC19R06092
ATTACHMENT E.
- USER’S MANUAL -
REPORT NO. : HCT-F03-0702 HYUNDAI C–TECH
Type No. C19R06092
Click
www.hyundaiQ.com
ImageQuest V995
Multiscanning Color Monitor
NEXT
User’s Guide
U.S.A.
BACK
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
NEXT
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
DECLARATION OF CONFORMITY
BACK
WE ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment : COLOR MONITOR
Type-Designation : C19R06092
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN 60950 : 1992 + A1, A2, A3, A4, A11
EMC : EN 55022 : 1998, EN 55024 : 1998
EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998
EN 61000-3-3 : 1995
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
NEXT
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA / JULY 2, 2003 HONG KI, KIM
(Place and date of issue) (Name and signature of
authorized person)
Contents
BACK
V995
Multiscanning Color Monitor
NEXT
1. Introduction...............................1/19
2. Safety Information ...................1/19
3. Installing the monitor...............3/19
3-1. Packing List ..............................3/19
Fastening the swivel and tilt base...
3-2.
3-3. Selecting a suitable location .......4/19
3-4. Connecting the monitor..............5/19
3-5. Setting the refresh rate .............7/19
Preset Timing Table ...................7/19
4. Adjusting the picture ...............8/19
4-1. Using the On-Screen-Display ........9/19
4-2. Direct access buttons ....................9/19
4-3. OSD Adjustments ........................10/19
5. Display power management ..15/19
Reducing power consumption ..........15/19
6. Troubleshooting.......................16/19
7. Specifications ..........................19/19
4/19
1. Introduction
2. Safety Information
BACK
V995
Multiscanning Color Monitor
NEXT
This manual contains instructions for installing and operating ImageQuest V995.
ImageQuest V995 is a highly ergonomic color display unit;
• 19” diagonal (19” viewable) 0.26mm dot pitch CDT
• Supporting high screen refresh rates and full scan flicker-free picture quality
• With On Screen Display menus for user control
• 100-240V AC input voltage
• VESA DPMS (Display Power Management Signaling)
• VESA DDC1/2B compatibility
When you set up and use your display unit, follow the safety instructions below.
• Do not use the display unit in humid environments like bathrooms, damp
cellars, swimming pools, etc.
• This equipment must be connected to an earthed outlet which is close to the
display unit and accessible in case you need to disconnect the display.
• Do not connect an extension cord.
• Never insert objects into the openings on the outside of the device as you can
come into contact with live electrical components. This can cause fire or give
strong electrical shocks.
• Slots in the cabinet are provided for ventilation. Do not block the ventilation
slots in the display unit cabinet.
• Do not under any circumstances open the display unit cabinet.
1/19
Cleaning and Maintenance
BACK
V995
Multiscanning Color Monitor
NEXT
• To avoid risk of electric shock, do not disassemble the display unit cabinet.
The unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong solvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
• Do not wipe the screen with a cloth or sponge that could scratch the surface.
• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
• To clean display unit cabinet, use a cloth lightly dampended with a mild
detergent.
• During the transportation of the monitor, the swivel base has to be removed in
every case.
2/19
3. Installing the monitor
UK
America/Canada
Japan
Australia
Korea
Europe
South Africa
3-1. Packing List
BACK
V995
Multiscanning Color Monitor
NEXT
The following items should be found in the packaging.
Attached
Signal
Cable
Tilt and Swivel Compact Disc Power cord
Above power cord can be changed upon different voltage areas. Please
!
contact your dealer if anything is missing or damaged.
3/19
Loading...