Hyundai Electronics H-CMD4034 User manual

H-CMD4034

MULTIMEDIA DVD/CD/MP3 RE-

CEIVER WITH 4.2” TFT DISPLAY

AND BUILT-IN TV TUNER

МУЛЬТИМЕДИЙНЫЙ

DVD/CD/MP3-РЕСИВЕР

С 4.2” TFT-ДИСПЛЕЕМ

И ВСТРОЕННЫМ ТВ-ТЮНЕРОМ

Руководство по эксплуатации Instruction manual

Table of contents Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Utilization of the product Important safeguards

Installation/Connection

Installation

General notes DIN front/rear mounting DIN front mount (Method A) Dismantling the unit Trim frame installation DIN-rear mount (Method B) Detachable control panel Anti-theft system

Connection

Connection diagram Using the ISO Connector ISO connection table Parking wire connection Reverse driving cable connection Lamp in wire

Operation

Control elements

Front panel Inner panel Remote controller Changing the battery

General operations

Touch screen Reset the unit Turning the unit on/off Display dimming/off Volume control Setting the sound characteristics Mute function Equalizer setting Loudness Mode selection Clear

System setup

Audio adjust

Video adjust

System adjust

Radio operations

User interface of Radio mode

Band selection

Manual/automatic tuning

Manual storing of stations

Auto scanning/memorizing stations

Selecting stored station

Mono/Stereo selector

Local/distant selector

RDS background

RDS touchable user interface

AF (Alternative frequencies) function

TA (Traffic alarm) function

PTY (Program type)

TV tuner operations

TV touch screen menu

9 10 10 10 10 11 11 12 12 12 12 12 12 12 12 12 12 12 12

TV channel selection Frequency searching

Seek channels automatically AUX operations Disc/USB/SD/MMC operations

Insert/eject disc

Touch screen operations with disc/USB/ SD/MMC

File disc/CD/USB/SD interface

Insert/eject USB/Memory card

Selecting tracks

Pause/Stop the playback

Fast rewind/forward

Repeat playing

Random playback

System switch

Slow playback

Picture zooming

On-screen display

13 13 13 13 14 14 14 14 14 14 15 15 15 15 15 15 15 15 15 15 16 16 16 16 16 16

16 17 17 17 17 18 18 18 18 18 18 18

2 3

Playback setting View angle Audio language Subtitle language Playback programming ID3 Tag function MENU function (for DVD)

DVD setup

General setup page Dolby digital setup Preference setup Exit

General information

Handling compact discs

Cleaning discs Cleaning the unit body Accessories Troubleshooting guide Specification

18 18 18 18 19 19 19 19 19 20 20 20 22 22 22 22 22 23 24

Before you start

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not read through this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of higher class than 1. Laser beams from the optical pickup are dangerous to the eyes. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

• Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids or dust. Protect this unit from moisture.

• Make sure that foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

• The beginning of operation is the moment of the unit installation. Before use the device in winter it is recommended to heat up the passenger compartment during 20 seconds or to the operation temperature.

• Using the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the screen

and other components of the unit and can result in an outage.

• Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.

• The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please ensure it before installation.

• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.

• Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.

• Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a thunderstorm.

• Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Let a qualified technician check the system.

• Always keep the volume low enough so that you can hear sounds from outside the vehicle.

• Should this product fail to operate properly, contact your dealer or nearest service center.

Installation/Connection

Installation

General notes

• Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

• Before finally installing the unit, connect the wiring and make sure that the unit works properly.

• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

• If installation angle exceeds 35° from horizontal, the unit may not perform properly.

• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either from ‘Front’ (conventional DIN Front-mount) or ‘Rear’ (DIN Rear-mount installation, utilizing threaded screw Holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

182

1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation.

2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands.

4. Make the necessary wire connections. Ensure the connections are correct.

5. Install the unit into the sleeve and screw in four frontal screws.

Dismantling the unit

a – Trim frame b – Frame uninstall direction c – Screws to be taken out

Installation/Connection

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the front side of the trim frame (apply some effort to detach the frame). Pull the frame to detach it.

3. Unscrew the four frontal screws nad pull out the unit from the sleeve towards yourself. Before detaching the unit, ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before installing the front panel; otherwise you are not able to install the trim frame. When the trim frame being installed, the side with the groove should face down and fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets.

1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes in the unit body, and screw in two screws (2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

Detachable control panel

Insert the right locker on the panel into the right groove of the unit, and then insert the left locker into the left groove. Lift the panel and press on the upper part of the panel until a click. Ensure the panel is fixed properly.

To detach the front panel, press RELEASE button. When the panel is in horizontal position, detach the left part of the panel from the locker, and then detach the right part.

The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in the included protective case when not in used and carried away when you leave the vehicle to deter theft.

Switch off the power of the unit. Detach the front panel, then put it to the protective case and take it with you.

Connection

Connection diagram

Subwoofer (brown line/brown head)

Rear camera input (brown line/yellow head)

AUX video input (black line/yellow head)

AUX audio input (black line/red and white head)

TV antenna socket

Installation/Connection

Radio antenna (black)

Video out 2 (light-grey line/yellow head)

Video out 1 (light-grey line/yellow head)

Rear RCA (light-grey line/red and white head)

Front RCA (dark-grey line/red and white head)

Reverse (orange) Parking (brown)

Lamp in (pink) (optional)

ISO connector

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

1. 2.

2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.

Cut the connector, connect the colored leads of the power cord to the car battery as shown in the colour code table below for speaker and power cable connections.

Installation/Connection Installation/Connection

ISO connection table

Location Function

Connector A Connector B 1 - Rear right (+) - Purple

2 - Rear right (-) - Purple/Black 3 - Front right (+) - Grey 4 Battery +12V/Yellow Front right (-) - Grey/Black 5 Antenna/Amplifier control - Blue Front left (+) - White 6 - Front left (-) - White/Black 7 Ignition/Red Rear left (+) - Green 8 Ground/Black Rear left (-) - Green/Black

Power antenna wire is intended for power supply of the antenna and for remote control of an additional amplifier.

8 9

Parking wire connection

Parking brake lead

Brown Wire

Brake light

Battery

Car frame

If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status, system setup and input video sources. When the car is moving ahead, if the video disc is played, the screen shows “Disabled while driving”, and blank screen. The above warning screen will prevent the driver from watching images.

Reverse driving cable connection

Car frame

Orange wire

Rear view video camera lead

If the rear view video camera is connected, the unit automatically switches to CAMERA source during reverse driving. The unit returns to the original work mode after the reverse driving is done.

Reverse driving light

Gearbox

Battery

Car frame

Lamp in wire (option)

The lamp in wire is intended for performing adjustable and non-adjustable brightness of button backlight of the unit front panel.

• Adjustable: the wire should be connected to the regulator of brightness of the car dashboard.

Front panel backilght is possible only when the car dashboard lighting is switched on.

• Non-adjustable: connected together with the yellow wire (battery +12 V); the front panel

backlight is active always when the front panel is attached to the unit.

Operation

Control elements

Front panel

1. POWER/MOD button

2. button

3. MUT button

4. LOUD/TA button

/BND button

6. IR sensor

7. LCD display

1 2 3 4 5 6 7 8 9

10 11 12 13 14

8. AV input/USB port (under cover)

9. RELEASE button

10.

button

11. EQ/AF button

12. AMS button

13. SEL button/VOL regulator

14. LOC button

Inner panel

1 2 3 4

1. EJECT button

2. Reset button (hole)

3. Disc slot

4. Memory card slot

Operation

Remote controller (RC)

9 10 11

13 14 15 16 17 18

1. AF/EQ button

2. PWR button

3. GOTO button

4. BAND/TITLE button

5. Number buttons

6. AMS/MENU button

7. LOC/SUB-T button

8. LEFT cursor button

9. ST/AUDIO button

10. OSD button

11. PTY/ANGLE button

12.

/ button

13. button

21 22 23 24

25 26

28 29

30 31

32 33

14. ZOOM button

15. PROG button

16. P/N/

17. VOL- button

18. button

19. TA/LOUD button

20. MODE button

21. UP cursor button

22. CLEAR button

23. ENTER button

24. RIGHT cursor button

25. DOWN cursor button

26. SETUP button

27. / button

28. button

29. / button

30. RPT button

31. RDM button

32. SEL button

33. VOL+ button

button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 lithium battery, type CR2025 (3 V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote controller.

• Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.

• Do not recharge, short, disassemble or

heat the battery or dispose it in a fire.

• Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire.

• When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a fire.

• Please direct the Remote controller to the IR sensor of the front panel.

Operation Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most functions not only by pressing buttons but also by touching the options you need.

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press Reset button on the inner panel with a pointed object (such as a ballpoint pen) to set the unit to initial state.

When some errors occur on the display, you can also press Reset button to resume to normal, and it will erase the clock setting and some memorized functions.

Turning the unit on/off

Press PWR button on the RC or POWER/ MOD button on the panel to turn on the unit. Press and hold the button more than 2 seconds to turn off the unit.

Display dimming/off

Press and hold MUT button on the panel or

/ button on the RC to dim the TFT display. Press and hold this button again to switch off the TFT. Press and hold for the third time to enable the display.

Volume control

Press VOL+/VOL- buttons on the RC or rotate VOL regulator on the unit to increase/ decrease the sound volume level.

Setting the sound characteristics

Repeatedly press SEL button on the RC or on the unit to select the desired parameter in the following order: VOL (volume) => BAL L.R (balance left-right) => FAD R.F (fader rear/front) => BAS (bass) => TRE (treble). After selecting the desired parameter, you can adjust its current level by pressing VOL+/- buttons on the RC or rotating VOL regulator on the unit.

Mute function

Press button on the RC or MUT button on the unit to turn off the sound. Press the button again or adjust volume to resume the sound output.

Equalizer setting

While listening to music, you can select the corresponding preset modes to adjust the sound quality perfectly by using AF/EQ button on the panel or on the RC. Press and hold the button repeatedly to choose the following modes in turn: POP => CLASS => ROCK => Off (no equalizer).

Loudness

Press and hold TA/LOUD button on the RC or LOUD/TA button on the panel to activate loudness function. This is to increase the low frequency, which can improve sensitivity for your ears. Keep pressing it again to quit this function.

Mode selection

• Repeatedly press MODE button on the RC or POWER/MOD button on the unit to select a mode: Radio => Media => TV => AV1 => AV2.

• In any mode touch to display the Main menu. In the menu, touch the item of the mode you need to select the corresponding mode.

The Media mode is only available when a disc, USB or SD/MMC card is inserted into the unit. IPOD and BT modes are not supported by this unit.

item on the screen

Clear

After inputting false data, press CLEAR

button to clear it.

System setup

In any mode touch icon to go to setup mode. When you select setup mode, the menu will be displayed, in which you can touch any item to perform operations. Setup menu includes

12 13

VIDEO, AUDIO and SYSTEM items. Touch them on the monitor to set the desired status.

Audio adjust

1 2 3 4 5 6 7

1. Touch to return to previous menu page.

2. Touch to decrease value.

3. Touch to adjust the parameter.

4. Touch to go to first menu page.

5. Touch to increase value.

6. Touch to go to second menu page.

7. Touch to close the menu.

In this menu you can adjust volume, bass, treble, balance (available in the first page), fader, equalizer and loudness (available in the second page). Touch the corresponding parameter, then touch increase and decrease buttons on the screen or VOL+/- buttons on the RC or rotate VOL regulator on the panel to adjust the selected parameter. To adjust Equalizer and Loudness, touch After adjustment is performed, leave the unit idle for several seconds.

and icons.

Video adjust

1 2 3 4 5 6

1. Touch to return to previous menu page.

2. Touch to select a parameter.

3. Touch to decrease value.

4. Touch to increase value.

5. Touch to reselt to default value.

6. Touch to close the menu.

In this menu you can adjust Brightness (BRI), Color (COL), Contrast (CON) and Tint. Select the corresponding item, then touch increase and decrease buttons on the screen or VOL+/- buttons on the RC or rotate VOL regulator on the panel to adjust the selected parameter. After adjustment is performed, leave the unit idle for several seconds.

System adjust

This menu consists of 4 subpages: Time, Touch, TV mode and Other. In each page touch

and icons to adjust the setting.

TIME

• Time: select on/off clock display.

• Time M.: Set 12-hour or 24-hour clock

display mode.

• Hour: Set hours.

• Minute: Set minutes.

TOUCH

After you touch this item, a cross appears in the left top corner of the display and a tip: “Carefully press and briefly hold stylus on the center of the target. Repeat as the target moves around the screen”. Press the cross at place 1, then it will move to another corner, press it again. Now it will move to the third position, press it, then the last but one and the last position. After you pressed the cross five times, the calibration is performed.

The calibration procedure is useful when some malfunction occur with the touch screen, and it needs adjustment.

TV MODE

Select the TV system.

OTHERS

• Local Area: You can select OIRT or FM

Only, to search the stations quickly in your

Operation

correspondng band.

• Key Beep: Select ON or OFF, the default setting is ON. It means when you press the buttons, they are sounded.

• Rever Pola (Reverse Polarity): The signal is +12V when you back a car, select BATTERY on the monitor; if the signal is 0 V, select GROUND.

• TA Volume: You can select LOW, NORMAL or HIGH TA volume.

Radio operation

User interface of Radio mode

When the unit is switched to Radio mode, the below touchable user interface will be displayed on the display.

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 17

1. Current band indicator.

2. Touch to go to RDS page.

3. Volume level.

4. Current frequency.

5. Current channel number.

6. Clock.

7. Touch to go to setup menu.

8. Return to Main menu.

9, 11. Touch repeatedly to change frequency step by step. Touch and hold for automatic search of the nearest station.

10. Touch to scan the current band channels. Touch and hold for automatic search and saving.

11. Touch to select bands.

13, 14. Touch to select previous/next saved

station.

15. Touch to select mono/stereo reception.

16. Station list. Touch an item call the station. Touch and hold to save the current frequency in the preset position.

17. Touch to switch between local and distant station receprion.

Band selection

Press BAND/TITLE button on the RC or / BND button on the panel to switch to the bands in the following order: FM1 - FM2 - FM3 – FM4 (OIRT) - AM1 - AM2.

Manual/automatic tuning

• Manual tuning: Press / buttons on the RC repeatedly to change the frequency upward or downward step by step.

• Automatic tuning: Press and hold / buttons on the RC to start automatic seeking for an available radio station downward or upward. After being found the station will be played.

Manual storing of stations

Find the needed frequency, press and hold a number button (1~6) under which you want to store the station. The station will be stored. To call a stored station, press the corresponding number button.

Scanning/memorizing stations automatically

In radio mode, you can press AMS/MENU button on the RC or AMS button on the panel to scan for several seconds each station stored in number positions. You can press the corresponding number buttons, AMS/MENU button on the RC or AMS button on the panel when your desired station is on. And it starts playing that station.

Press and hold AMS/MENU button on the RC or AMS button on the panel; it will activate automatic storing function. The tuner automatically finds a station and stores it in number positions.

Operation

Selecting stored station

In radio mode, press / buttons on the RC or on the panel to select the stored station upward/downward.

Mono/Stereo selector

In radio mode, you can press ST/AUDIO button on the RC to select mono or stereo mode. Stereo reception is on when MONO disappears on the display. It is switched to mono mode when MONO appears. When the received stereo signal is weak, switch to mono mode to improve the signal.

The function is available only in FM bands.

Local/distant selector

In radio mode, press LOC/SUB-T button on the RC or LOC button on the panel to select strong or weak station reception. LOC appears on the display and only local stations are available. When you turn it off both distant and local stations can be received.

The function is invalid in AM bands.

RDS background

RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available.

RDS touchable user interface

In Radio interface, touch the arrow in the left upper corner; following menu will be displayed:

2. Touch it to set PTY function on or off.

3. Touch to set REG function on or off. When REG is on, AF switching or PI SEEK is implemented to the station which have all PI codes are same as current station.

4. Touch it to set TA function on/off.

5. Touch it to set AF function on/off.

All the other icons of this interface

correspond to the main Radio interface.

AF (Alternative frequencies) function

Briefly press AF/EQ button on the RC or EQ/ AF button on the panel to enable AF function. When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (Program Identification) as the current station but with stronger signal strength.

AF indicator on the display will flash until

RDS information is received.

TA (Traffic alarm) function

Briefly press TA/LOUD button on the RC or LOUD/TA button on the panel to activate the traffic alarm function. When AF is on, the TA displays on TFT, or else, if there is no TP information, the mode will search TP station automatically.

PTY (Program type)

Briefly press PTY/ANGLE button on the RC to activate PTY function. When PTY is on, PTY menu appears on the monitor, you can touch

and icons to select a program type. After selecting, touch the programm type icon to start searching the program.

21 3 4 5

1. Touch to go to Radio interface.

TV tuner operation

TV touch screen menu

When you select TV mode, following

touchable User Interface will be displayed:

Operation

CH1 48 MHZ

1 2 3 4 5 6 7 8 9 10

SECAM DK

1. Current channel and frequency.

2. Touch to call touchable keypad.

3. Volume level

4. Touch repeatedly to change frequency step by step downwards/upwards. Touch and hold for automatic search of the nearest channel downwards/upwards.

5. Sound/color system.

6. Touch to select channels.

7. Touch to go to setup menu.

8. Return to Main menu.

9. Touch for automatic search of channels.

10. Touch to close the menu.

TV channel selection

Press UP/DOWN cursor buttons on the RC to select the TV channels. Press 1-9 number buttons to select stations directly. You can also touch number keys on the touchable keypad.

Frequency searching

Press LEFT/RIGHT cursor buttons on the RC or / buttons on the panel to select the frequency upwards and downwards step by step. Press and hold the button for automatic search of nearest channel.

Seek channels automatically

Touch SCAN icon on the screen to seek and save stations automatically.

AUX operation

When AUX mode is selected, following User Interface will be displayed (the interface for AV1 and AV2 is the same):

A 2

02:54

1 2 3 4 5

1. Volume level

2. Clock.

3. Touch to go to setup menu.

4. Return to Main menu.

5. Touch to close the menu.

Disc/USB/SD/MMC card operations

Insert/eject disc

• Close the front panel, insert a disc into the slot. The unit will automatically switch into DVD mode. After loading the disc, its playback will start automatically.

• Open the front panel and press EJECT to eject the disc.

Touch screen operations with Disc/

USB/SD

While playing a file contained on a CD/ MP3/USB/SD, the touch screen has following areas and buttons enabling to perform various playback operations:

+ 35 hidden pages

Hyundai Electronics H-CMD4034 User manual

Specifications and Main Features

Frequently Asked Questions

User Manual