Hyundai HY-OFF-S-10001, HY-OFF-S-10000 User guide

Mr. Scan

1.Key features

•Color & mono scan selection

•300/600/900 dpi scan resolution

•Directly save files in JPG or PDF format to microSD card

•Supports microSD/microSDHC cards up to 32GB

•Transfer files via Wi-Fi connection

•Driver-free for Windows XP, Windows Vista, Windows 7 and Mac OS 10.4 or above

(Directly plug-in, driver installation not required)

2.Functional parts

		Part	Function
	1	Battery cover	Open to store 2x AA alkaline batteries
			Power On/ Off: Press and hold this key for 2 seconds to turn
	2	Power/Scan	power on or off. When the scanner is on, press this button to
			start scanning, press this button again to stop
	3	Format button	Format the microSD card will delete all data from memory card
	4	Color/Mono	Select Color/Mono scan option
			Color/Mono mode icon will be displayed on status LCD
	5	LCD screen	Scanning status display
	6	Error LED indicator	Indicates scan error or over speed
	7	WIFI LED indicator	Indicates Wi-Fi status
	8	Scan LED indicator	Shows the scanning status; ready for scan
	9	Wi-Fi switch	Slide to turn Wi-Fi on/off
			Scan resolution setting for High(900dpi) / Medium(600dpi) /
	10	DPI	Low(300dpi); High/Medium/Low resolution mode icon will be
			displayed on status LCD
	11	JPG/PDF	Select scan file format with JPG/PDF button, JPG/PDF mode
			icon will be displayed on status LCD
	12	Time set	Press this button to enter Time and Date setting mode
	13	USB interface	Connect to a computer via USB cable provided to view
			and transfer files
	14	microSD card slot	microSD card storage location

3. Explanation of the status icons

Item	Function		Description
1	File Format	JPG/PDF
2	SD card indicator	Photos will be stored on microSD card
3	Battery indicator	Battery is full	Empty battery
4	Scan Color	COLOR/MONO
5	Counting Indicator	Counts scanned files on the microSD card
6	Scan resolution	HI:900 dpi / MI:600 dpi / LO:300 dpi

4. LED light indications

LED indication	Description
Green LED ON	Scanning in progress.
Green LED OFF	Scanning is ready or completed.
BLUE LED OFF	Wi-Fi is off.
BLUE LED flashes every 3 seconds	Wi-Fi is ready for connection
BLUE LED flashes every 1 seconds	View the web page
BLUE LED flashes rapidly	Data is transferring via Wi-Fi mode
RED LED ON	Scanning too fast

5. Using the scanner

5.1 Installing the battery

1.Open the battery cover by sliding the battery compartment downwards then lift up as indicated by the arrow in the diagram below.

2.Insert 2x AA alkaline batteries into the battery compartment.

3.Turn on the scanner by pressing the [POWER] button for 2 seconds.

5.2 Inserting a microSD memory card (not included)

To operate the scanner, you must insert a microSD card (not supplied) to record and store your pictures. Insert the microSD memory card:

1.Turn ON the scanner.

2.Insert the microSD card into the microSD card slot (with metal side facing up). Gently press in until card is latched and clicked into place.

3.The SD card indicator must appear on the LCD screen.

Note: Do not force the card into the slot; forcing may damage the scanner and the MicroSD card. Align the microSD card position (as marked) and try again.

5.3 Time and Date setting

1.Press [TIME SET] button once to enter time setting mode by using a thin, blunt object, such as the end of a paperclip to access the button. The LCD status display screen will show

“1 ##” (step 1) for the year. “##” is a set of number that would be changed to correspond to the actual time/date setting. The numbers 1-5 in front of “##” indicates each step in the settings.

2.Press the [JPG/PDF] or [DPI] button to select the current Year.

3.Press [SCAN] button once to confirm setting.

4.Repeat step 2 and 3 to continue the Time and Date setting process

Indicator	Setting
1 ##	Year
2 ##	Month
3 ##	Date
4 ##	Hour
5 ##	Minute

5.After setting the Minute, “5##”, press the [TIME SET] button again to complete the Time and Date setting.

5.4 Formatting the microSD memory card

Note: All content on the microSD card will be erased during formatting.

1.Insert a microSD card into the scanner with metal side facing up.

2.Turn on the scanner by pressing the [Power/Scan] button for 2 seconds.

3.Press the format button. An “F” will display on the LCD status display screen.

4.Press the [SCAN] button once to format the microSD card.

5.The SD card indicator will flash until the formatting process is complete.

5.5 Setting the resolution

Press the [DPI] button to select High / Medium / Low resolution. High/Medium/Low resolution icon will be displayed on status LCD.

5.6 Setting the scan mode

Press the [JPG/PDF] button to select JPG/PDF mode. JPG/PDF icon will be displayed on status LCD.

5.7 Setting the color/mono mode

Press the [COLOR/MONO] button to select scan type Color/Monochromatic mode. Color/Mono icon will be displayed on status LCD.

5.8 Calibrating the scanner

Note: Perform calibration only when white balance needs adjustment

1.With the dry cleaning cloth provided, clean the scanning lens located on the bottom of the scanner.

2.Turn on the scanner by pressing the [POWER] button. Place the scanner on the white area of the White Balance Calibration paper provided.

3.Press and hold the [COLOR/MONO] button. While holding the [COLOR/MONO] button,

press the [POWER] button and then release both buttons to enter into auto-calibration mode. SD symbol will flash and then stop. “GREEN” and “RED” LED light will turn on.

4.Do not move the scanner. Wait until the “RED” LED turns off. “GREEN” LED will stay on.

5.With only the “GREEN” LED light on, start scanning the white paper by sliding the scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner backwards if necessary).

6.Press and hold the [POWER] button to power off the scanner. Calibration is complete.

5.9 Scanning a document

Note: To scan, make sure your scanner is not connected to the computer and not in WiFi mode.

1.Turn on scanner by pressing the [Power/Scan] button for 2 seconds.

2.Hold the document firmly with one hand on a flat surface.

3.Place the scanner on the edge of the paper to ensure the whole document can be scanned. Make sure to keep the scanning area in between the scanning width indicators marked on the side of the scanner.

4.Hold the scanner flat against the material and then press the [SCAN] button once.

5.Slide the scanner slowly, keeping your hand stable to get the best quality picture.

6.Press the [SCAN] button again to stop scanning.

6. Using Wi-Fi function

6.1 Enabling Wi-Fi function

View and transfer file from the scanner to your computer, laptop, smart devices and tablets via Wi-Fi mode.

1.Turn on the scanner and slide the Wi-Fi switch ON. “ ” will display on status LCD.

2.Wait about 30 seconds for Wi-Fi to initialize. “BLUE” LED light will flash every 3 seconds once Wi-Fi mode is enabled and ready for connection.

Note: The use of Wi-Fi function will reduce battery life more rapidly. Turn Wi-Fi mode OFF when not in use to save battery. In Wi-Fi mode, Can not use the scanner to scan file and can not complete calibration mode naturally.

6.2 View files from Internet Browser via Wi-Fi

1.Turn on Wi-Fi mode on your scanner.

2.Go to network setting on your computer/smart device to enable Wi-Fi setting

3.Search the “WIFISCAN-xxxxxx” network

4.Enter password “123456789” to connect to the scanner

5.Open Internet browser and input “10.10.1.1” at the address bar to enter navigation page to view and download files

6.In navigation page, click the choose file button to upload the file into the scanner.

Note: Due to limited memory, large PDF files may encounter an error in displaying the files properly. Please connect to your computer via USB cable to view your files.

7. USB Connection with Computer

1.Connect your scanner to your computer and then turn on your scanner.

2.Your computer will recognize the scanner as a “Removable Disk”,” ” symbol will display on status LCD. Click “Open folder to view files” to view, import, copy, move or delete

scanned files.

Note: If the Removable Device Window did not launch automatically, go to your “My Computer” and find the device under Removable Storage. Before connected your scanner to computer please conform the scanner is not in WiFi mode.

8. Specifications

Image sensor	Color Contact Image Sensor
Number of sensor	5136 dots (1st~5104 dots available)
	Low resolution: 300x300 dpi
Resolution	Middle resolution: 600x600 dpi
	High resolution: 900x900 dpi
	Color High resolution		12.0 Seconds
	Mono High resolution		10.0 Seconds
Maximum scanning speed for	Color Medium resolution		8.0 Seconds
Letter size document	Mono Medium resolution		6.0 Seconds
	Color Low resolution		3.0 Seconds
	Mono Low resolution		2.0 Seconds
Capacity (Based on	Color High resolution		300 Scans (Min.)
1GB microSD card.	Mono High resolution		320 Scans (Min.)
Scan Letter size file, the	Color Medium resolution		640 Scans (Min.)
quantity of scans varies	Mono Medium resolution		700 Scans (Min.)
depending on the content	Color Low resolution		1600 Scans (Min.)
complexity)	Mono Low resolution		1800 Scans (Min.)
Scan width	212mm
Scan length (max.)	300dpi: 98", 600dpi: 45", 900dpi:35"
File format	JPG/PDF
LCD	Scanning status display
Auto Power Off	3 Minutes
USB Port	USB 2.0 high speed
External memory	microSD/microSDHC memory card to up 32GB
Standard Battery	2X AA alkaline batteries
Wi-Fi®	802.11b/g/n

9. Computer system minimum requirement

	Operating System	Windows 7 / Vista / XP(SP3) and Mac OS 10.4 or above
		(Driver Free)
	CPU	Pentium or above
	RAM	At least 256MB
	Interface	USB port

10.Troubleshooting

	Problem	Cause	Solution
		1. Low battery power.	Replace or install the battery
	Cannot turn on the scanner	2. Battery not inserted
			correctly
		properly
		1. The microSD card has	1. Install microSD card
			2. Download the pictures
		not been installed
	Pictures cannot be saved		from the scanner to the
		2. Memory is full
	when you are scanning		computer to create
		3. The MicroSD card has
	them		storage space
		not been formatted
			3. Reformat mircoSD card
		properly
			Please refer to section 5.4
	Computer does not		Make sure all cable
	recognize your scanner
			connections are secured.
	when connected (You	Connection failure.
			Restart the computer if
	cannot find removable
			necessary
	disk)
	The battery life is very	Use wrong type of battery	Replace with new
	short		2x AA alkaline batteries
		1. The lens of scanner is	1. Clean the lens with soft
	Blurry images	dirty.	dry cloth.
		2. Contact Image Sensor	2. Recalibrate scanner.
		aged.	Refer to section 5.8
	ERR. LED is on after	Sensor off-set	Recalibrate the scanner.
	powering on scanner		Refer to section 5.8
	ERR. LED is on when		Press the Power/Scan button
		Scanning speed is too fast	to reset and scan the
	scanning a document
			document again
			1. Clean the sensor’s
	Black Images/Black or	1. Scanner senor protective	protective glass with clean
		glass is dirty.	and soft dry cloth.
	white vertical lines
		2. Calibration data is off-set.	2. Recalibrate scanner.
			Refer to section 5.8
			1. Reconnect Wi-Fi. Refer
	Wi-Fi abnormal	1. Abnormal connection	to section 6
	connection	2. The battery is low.	2. Replace with new 2x AA
			alkaline batteries

For more information please visit www.my-hyundai.de

AM-N44W-GB-BHS-1