Hyundai HYBV26-2 User Manual

1
2
CONTENTS
PAGE NO.S
1
SAFETY 3 - 7
2
PART LOCATIONS
8
3
ASSEMBLY 9 - 11
4
QUICK START GUIDE
12
5
FUELLING 13
6
STARTING & STOPPING PROCEDURE
14 - 15
7
OPERATING INSTRUCTIONS
16
8
MAINTENANCE
17 - 19
9
STORAGE & TRANSPORTATION
20
10
TROUBLE SHOOTING
21 - 22
11
PARTS LIST 23 - 26
12
DECLARATION OF CONFORMITY
27
13
CONTACT DETAILS
28
14
CONTACT DETAILS
30
INDEX
3
1. SAFETY
1.1
General Safety Notes.
1.2
The operator of the machine is responsible for, and has a duty of care in making sure that the machine is operated safely and in accordance with the instructions in this user manual. Keep the manual safe and pass it on if the machine is loaned or sold to another user.
1.3
Please note the following safety points.
1.4
The machine should never be left it in a condition which would allow an untrained or unauthorised person/s to operate this machine.
1.5
All due care and diligence should be taken by the operator for the safety of and with regard to those around whilst using the machine.
1.6
Some or all of the following - warning signs, symbols and/or PPE pictograms may appear throughout this manual. You MUST adhere to their warnings. Failure to do so may result in personal injury to yourself or those around you.
DANGER
Indicates a hazard, which, if not avoided, could result in serious injury or death.
WARNING
Indicates a hazard, which, if not avoided, could result in serious injury.
CAUTION
Indicates a hazard which, if not avoided, might result in minor or moderate injury.
NOTE
Indicates a situation that could easily result in equipment damage.
READ and keep the manual safe and pass it on if the machine is loaned or sold to another user.
You MUST fully understand all instructions to ensure you use and operate the machine safely.
Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine.
4
1.10
Carbon Monoxide (where applicable).
1.11
Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause death as well as serious long term health problems such as brain damage.
1.12
The symptoms of carbon monoxide poisoning can include but are not limited to the following; Headaches, dizziness, nausea, breathlessness, collapsing or loss of consciousness.
1.13
Carbon monoxide poisoning symptoms are similar to flue, food poisoning, viral infections and simply tiredness. It is quite common for people to mistake this very dangerous poisoning for something else.
1.14
To avoid carbon monoxide poisoning DO NOT use Petrol/Diesel powered equipment inside any of the following; Home, garage, tent, camper van, mobile home, caravan or boat. This is not exhaustive and if you are in any doubt contact your dealer.
1.15
If you think you have or someone around you has been affected by carbon monoxide poisoning;
1.16
Get them fresh air immediately, by leaving the affected area or by opening doors and windows. If safe and practical to do so make sure that the machine is turned off. DO NOT enter a room you suspect of having carbon monoxide present – instead call the emergency services.
1.17
Contact a Doctor immediately or go to Hospital – let them know that you suspect carbon monoxide poisoning.
1.18
DO NOT use in an enclosed area or moving vehicle.
1.20
General Fuel Safety (where applicable).
CAUTION
ALL FUELS ARE FLAMABLE
1.21
Fire Hazard – keep fuel away from all sources of ignition for example heaters. Lamps, sparks from grinding or welding.
1.22
DO NOT carry out hot work on tanks that have contained fuel.
1.23
ALWAYS keep the work area tidy.
1.24
ALWAYS clean up spills promptly using absorbent granules and a lidded bin.
1.25
ALWAYS dispose of waste fuels correctly.
5
1.30
Fueling/De-fueling (where applicable).
CAUTION
ALL FUELS ARE FLAMABLE
1.31
ALWAYS fuel and defuel in a well ventilated area outside of buildings.
1.32
ALWAYS wear correct, suitable and fit for purpose Personal Protective Equipment
(PPE), suggested items are but not limited to safety gloves, overalls.
1.33
When fueling/de-fueling ALWAYS avoid inhaling fumes.
1.34
When de-fueling ALWAYS use a proper fuel retriever.
1.35
ALWAYS carry fuel in the correct and clearly marked container.
1.40
Electrical Safety )where applicable).
1.41
Electricity can kill – NEVER work on LIVE/ENERGISED equipment.
1.42
Prior to carrying out any maintenance work you MUST identify electrical isolation methods and isolate all electrical supplies.
1.43
Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and connectors for the following;
1.44
Are intact and have no signs of damage, to include but not limited to bare wires, chaffing, cuts and loose wiring.
1.45
If there are any signs of damage, the damage item MUST be taken out of service until the damage has been repaired by an electrically competent person.
1.46
All trailing cables should be routed so as not to cause any kind of trip hazard.
1.47
NEVER work on or near electricity with wet hands, wet clothing and wet gloves.
1.50
Batteries (where present).
1.51
Batteries present a risk if they become damaged by the possible leaking of electrolyte. This electrolyte is an acid and can cause serious burn injuries. Care should be taken when working on or near them. NOTE the electrolyte may be in a liquid or gel form.
1.52
Should you come in to contact with electrolyte you should;
1.53
Remove all clothing contaminated with electrolyte. If you cannot remove then saturate them in water.
1.54
Get medical assistance as soon as possible. You must advise the medical staff of the type of acid.
6
1.55
Lead/acid battery = dilute sulphuric acid.
1.56
Nickel/cadmium = potassium hydroxide alkali electrolyte.
1.57
Use fresh running water to wash off excess electrolyte, continue this until medical assistance arrives. Make sure that you do not was the electrolyte to another part of your body or face.
1.58
If electrolyte comes in to contact with Eyes the electrolyte needs to be immediately washed away with large amounts of water. Make sure that you do not wash the electrolyte to another part of your face or body.
1.59
Gasses from charging batteries are highly flammable and great care should be taken to charge in well ventilated areas.
1.59.1 There is an explosion risk if the battery terminals are short circuited, when connecting/disconnecting ALWAYS exercise great care so that the terminals or battery leads are NOT allowed to touch and cause a spark. ALWAYS use suitable insulated tools.
1.60
Vibrations (where applicable).
1.61
Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause never damage and circulatory tissue death.
1.62
Not all factors that lead to white finger disease are known, but cold weather, smoking and other diseases that affect blood vessels and blood circulation as well as large and long-lasting impact of shocks are considered factors in the formation of white finger. Note the following to reduce the risk of white finger and carpal tunnel syndrome;
1.63
Wear gloves and keep your hands warm.
1.64
Take regular breaks.
1.65
All of the above precautions may help reduce the risk of white finger disease but not rule out the carpal tunnel syndrome. Long-term and regular users are therefore recommended to observe the condition of your hands and fingers. Seek medical attention immediately if any of the above symptoms should occur.
1.70
Noise (where applicable).
1.71
The operating noise of the machine can damage your hearing. Wear hearing protection such as earplugs or ear defenders to protect your hearing. Long-term and regular users are advised to have hearing checked regularly. Be especially vigilant and cautious when hearing ear protection because your ability to hear alarm warnings will be reduced.
1.72
Noise emissions for this equipment is unavoidable. Carry out noisy work at approved times and for certain periods. Limit the working time to a minimum. For your personal protection and protection of people working nearby it is also advisable for them to wear hearing protection.
1.73
See Certificate of Conformity section for Outdoor Noise declaration of conformity.
7
MACHINE SPECIFIC SAFETY
1.80
General Machine Safety.
1.81
Never add fuel to the tank whilst the engine is running or warm.
1.82
Wipe away any spilt fuel or oil with a clean cloth before operating.
1.83
Keep explosives or any other flammable products away from the machine at all times.
1.84
Do not use the blower/vacuum indoors or any enclosed space. This machine produces carbon monoxide which can be fatal if inhaled.
1.85
Operate the machine at ground level.
1.86
The exhaust and engine body becomes hot whilst the engine is running or just after running.
1.87
Careless or improper use of any blower/vacuum may cause serious injury or be fatal. If you are unsure how to use the machine you must read all of this manual and get your dealer to demonstrate its use.
1.88
NEVER point the blower/vacuum at any person or animal when in use.
1.89
Observe all applicable local safety regulations and standards.
1.90
Children should never be allowed to use a blower/vacuum.
1.91
Bystanders, especially children and animals, should not be allowed in to the area where a blower/vacuum is in use.
1.92
The operator is responsible for avoiding injury to third parties and damage to any property.
1.93
Do not lend or rent your blower/vacuum without the owner’s manual. Be sure that anyone who uses your blower/vacuum fully understands the information contained in this manual.
1.94
You must be fit to work on a blower/vacuum.
1.95
You should not operate a blower/vacuum if you are unwell or physically unable.
1.96
Do not operate the blower/vacuum if you are under the influence of any substances (alcohol, drugs etc.) which might impair vision, dexterity or judgement.
1.97
Only attachments supplier or expressly approved for use with your specific blower/vacuum model must be used.
1.98
No liability will be accepted for personal injury or damage to property cause by using unauthorised attachments.
1.99
Ensure all levers and switches move freely prior to operation.
1.99.1 Always wear the correct Personal Protective Equipment (PPE) for the blower/vacuum
8
8
7
1
13 2 12
3
6
4
5
9
11
10
2. PART LOCATIONS & SYMBOLS
1. Recoil starter
2. Fuel cap
3.Trigger
4. Blower tube 2
5. Blower tube
6. Fan cover
7. Air filter
8.Vacuum pipes 1&2
9. Choke
10. Spark plug
11.Power switch
12. Collector bag
13. Outlet tube
9
2
3
7
3. ASSEMBLY
2.0 Open the box and check that all parts are present as per the list below.
1
9
1. Power head 2. Blower tubes 3. Vacuum tube 4. Outlet tube
5. Lanyard 6. Fuel mixture bottle 7. Collector bag 8. Tool kit 9. User manual
8
6
5
4
10
VACUUM ASSEMBLY
2.1
Assemble the collector bag and tube attachment.
2.2
Take the curved tube (2) and insert inside the collector bag (1) in the direction of the arrow until you reach the elasticated neck. Make sure the tube is pulled through until it stops.
2.3
Using the supplied allen key, undo the bolts on the power head (1) and keep safe.
2.4
Place the end of the collector bag tube in to the power head housing (2), then push towards the machine as far as it can go.
2.5
Re-fit the power head bolts. (3).
2.6
To remove, reverse this process.
2.7
Hold the power head and undo the fan cover retaining screws (4) in an anti­clockwise direction, the screw should remain with the cover.
2.8
Select the upper vacuum tube that has the micro switch strike plate attached (5).
2.9
Lower the fan cover and insert the upper vacuum tube (6) ensuring the strike plate aligns with the micro switch on the power head. Push the tube as far as it will go and then turn in an anti-clockwise direction.
2.10
Attach the lower blower tube (7) using the 2 bolts provided in the tool kit.
1
2
3
Loading...
+ 22 hidden pages