Hyundai HY2156, HY2157 User Manual

4.5"/9" ANGLE GRINDER

Models HY2156 - HY2157

User Manual

Page 2

CONTENTS

Section Description

Page No/N

o’s

1. OWNER’S MANUAL & SAFETY INSTRUCTIONS

3

2. GENERAL SAFETY

3 – 5

3. SPECIFIC SAFETY INSTRUCTIONS

5 – 6

4. QUICK REFERENCE GUIDE and USE

7

5. ASSEMBLY

7 – 9

6. OPERATING INSTRUCTIONS

9 – 10

7. GENERAL MAINTENANCE

10

8. SYMBOLS

10

9. ENVIRONMENTAL

11

10. GENPOWER CONTACT DETAILS

11

11. DECLARATIONS OF CONFORMITY

11

Page 3

1. OWNER’S MANUAL & SAFETY INSTRUCTIONS

1.1. How to read the manual.

1.1.1. Keep this manual for the safety warnings and precautions, assembly, operation, inspection,

maintenance and cleaning procedures.

1.1.2. Write the product’s serial number in the back of the manual near the assembly diagram (or

month and year of purchase if product has no number).

1.1.3. Keep this manual and the receipt in a safe and dry place for future reference.

1.1.4. The term “power tool” in the warnings refers to your mains operated (corded) power tool or

battery-operated (cordless) power tool.

1.1.5. This combi drill is intended for inserting and removing screws and bolts within the drill’s

capability.

2. GENERAL SAFETY

Non-observance

will result in the

risk of serious
injury or death to
oneself or others.

Non- observance

will result in the

risk of injury to

oneself or others.

Indicates a hazard

which, if not

avoided, might

result in minor or

moderate injury.

NOTE or

IMPORTANT These

give details or

further

information on

what has already

been said, and aim

to prevent damage

to the machine or

cause other

damage.

Read Manual

DO NOT let comfort or familiarity with product (gained from repeated use) replace
strict adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in this instruction manual may
cause serious personal injury.

2.1. Work Area Safety

2.1.1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.1.2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

2.1.3. Keep children and bystanders away while operating a power tool. Distractions can cause you

to lose control.

2.2. Electrical Safety.

2.2.1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.

2.2.2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

2.2.3.

Page 4

2.2.4. Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

2.2.5. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled
cords increase the risk of electric shock.

2.2.6. When operating a power tool outdoors, use an extension cord suitable for outdoor use.

2.2.7. Use of a cord suitable for outdoor use reduces the risk of electric shock.

2.2.8. If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

2.3. Personal Safety.

2.3.1. Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.

2.3.2. Use personal protective equipment. Always wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.

2.3.3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energizing power tools that have the switch on invites accidents.

2.3.4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

2.3.5. Do not overreach. Keep proper footing and balance at all times. This enables better control

of the power tool in unexpected situations.

2.3.6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

2.3.7. If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of dust collection can reduce dust-related
hazards.

2.4. Power Tool Use and Care.

2.4.1. Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

2.4.2. Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

2.4.3. Disconnect the plug from the power source and/or the battery pack from the power tool

before making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.

2.4.4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.

2.4.5. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts

and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.

2.4.6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.