Hyundai H-TV2115SPF Instruction Manual

H-TV2115SPF

COLOUR TV	ТЕЛЕВИЗОР
	ЦВЕТНОГО ИЗОБРАЖЕНИЯ

Instruction manual

Руководство по эксплуатации

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents	2
Before you start	3
Utilization of the product	3
Important safeguards	3
Connection	4
Operation	5
Control elements	5
Remote controller	5
Changing the battery	5
Front panel	5
Button functions	6
OSD operation	6
Picture setting	6
Sound setting	7
System setting	7
Installation	7
General information	9
Troubleshooting	9
Causes of interference	9
Accessories	10
Specifications	10

Before you start

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

•All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.

•Before connecting the AC power cord to the current mains outlet, make sure that the voltage designation of the unit corresponds to the local electrical supply.

•Please unplug the power cord from the AC outlet and contact a service center for repair

if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.

•This unit should only be connected to a wall socket having grounding.

•Always disconnect the power cord and antenna during a storm.

•Do not fix the power cord with metal nails.

•Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.

•When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit, twist or pull the power cord.

•Please contact the service center

immediately if you found that the core is showed in the air or has been broken.

•Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.

•Never touch the antenna lie or power plug if it stars to thunder.

•Do not touch the power plug with wet hands.

•Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.

•Please use the accessories provided

by the manufacturer. Using inadequate accessories may result in accidents.

•Please adjust the product through the panel buttons or the remote controller

•Do not remove the cover or attempt to service the unit by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

•Overpressing the panel may destroy the product.

•Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.

•Please place the product on a flat surface

Before you start

in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.

•Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

•Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

•Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.

•Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.

•Do not place the unit into closed space

of TV for better ventilation; it can reduce the product lifetime. Keep a space at list 10 cm at above, left, and right of the TV.

•Please place all the signal cords behind of rear panel.

•Do not transport it with the power cord

or the connection cable connected. If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown.

• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic drawings of real objects and may differ from their real images.

Connection

•To get the TV signal, connect a CATV or outdoor antenna to the Antenna jack of this unit.

•Connect an external device (e.g., VCR-/ DVD-recorder) to the proper Audio/Video output jacks of this unit with AV RCA cable.

•Connect an external audio-video signal source to the proper Audio/Video input jacks of this unit with AV RCA cable.

•Insert the plug of the power cord to current supply mains.

Operation

Control elements

Remote controller

412

8 14

15 16

Changing the battery

•Remove the battery compartment cover on the back of the RC. Insert 2 AAA batteries into the battery compartment observing the correct polarity. Install the cover back.

•The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

•Take the battery out of the RC if it is not used for a long time.

•Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

•Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

Front panel

1.STANDBY button

2.Number buttons

3.TV/AV button

4.RECALL button

5.MENU button

6.OK button

7.VOL/VOLbuttons

8.SLEEP button

9.P.EFFECT button

10.MUTE button

11.DISPLAY button

12.FAV button

13.CH/CHbuttons

14.AT button

15.F3 button

16.F2 button

Buttons not indicated in the diagram above are not functional for this model.

1.TV/AV button

2.MENU button

3.VOL/VOLbuttons

4.PRO./PRO.buttons (function as CH/ CHbuttons of the RC)

5.IR remote sensor

6.Standby indicator

7.POWER button

Operation

Button functions

•Press POWER button on the unit or STANDBY button on the RC to switch on the power. Press the button again to switch off the power. When the unit is in standby mode, the standby indicator lights up; you can press

STANDBY button, CH/CHbuttons or any number button on the RC to switch the TV from the stanby mode.

•Press VOL/VOLbuttons repeatedly to decrease or increase the sound volume.

•Press SLEEP button repeatedly to set

the sleep time (from 10 to 120 min). When the sleep time is set, you can press this button to see the remaining time before the TV switches off. To cancel sleep function, press SLEEP time until OFF is selected.

•Press RECALL button on the RC to select from the present channel and the previously displayed channel.

•Press DISPLAY button to display the information window. Press again to cancel.

•Press P.EFFECT button repeatedly to cycle through the available video picture modes: Dynamic => Standard => Mild => Personal.

•Press FAV button to view the Favorite channel list.

•Press AT button to disable the picture

(the screen will be black) and make the audio available only. To cancel this function, press AT, MENU or OK button.

•Press MUTE button to cut off sound, press this button again or press VOLbutton to resume the sound.

•Press F3 button to enter or exit game

mode. The button functions in the game mode are following: VOL/VOLbuttons - start the mission/push box leftward or rightward; CH /CHbuttons - select a mission/push boxes upward/downward; RECALL button - restart the mission; OK button - undo previous step.

•Press F2 button to enable the calendar.

In the calendar mode, press VOL/VOL buttons to select month and press CH/CH buttons to select year (1950 - 2048).

•Press TV/AV button repeatedly to select a signal source.

•Press CH/CHbuttons to select previous or next channels; or press number buttons to enter a channel number directly.

OSD operation

Press MENU button to access the menu or return to the previous menu. Press CH/CH buttons to go to the needed item, then use VOLbutton or OK button to confirm your selection. Press VOL/VOLcursor buttons to adjust the selected item. Use number buttons to input numbers.