Hyundai H-LCD900 User Manual [ru]

H-LCD900

Portable LCD TV with USB/SD/ MMC support

Портативный ЖК-телевизор

с поддержкой USB/SD/MMC-

носителей

Руководство пльзователя Instruction manual

Instruction manual Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Important safeguards

• Never attempt your own maintenance. If something appears strange, please turn the TV off and consult your TV dealer. The TV is composed of many delicate electronic components that can be damaged or broken if you open the TV or attempt to modify it.

• Do not expose the TV to high humidity, dust, steam, oil, smoke, direct sunlight etc.

• Do not use thinners or other chemical reagent. Wipe the TV off with a soft cloth if it gets dirty.

• Do not leave the TV in excessively hot or cold places. Permissible storage temperatures are within the range of –20°C to +60°C. Permissible operation temperatures are within the range of 0°С to +40°С.

• Only use specified adaptors and power sources.

• Turn power OFF when not in use and unplug the adaptor.

• Avoid dropping and strong impact.

• For your safety, the driver should not watch TV or operate the controls while driving.

• Please note that watching and operating the TV while driving are prohibited by law in some countries.

• That don’t mean the TV is broken with some light or dark color dots on the LCD, it’s a popular condition with the TFT-LCD technology.

• For open-designed earphone, to avoid influencing your periphery, please tune down the volume.

• It is recommended to never use the earphone continuously for a long time.

H-LCD900 is a portable TV-receiver capable of playing audio, video and photo files from SD and USB. Maximum supported volume is 8 Gb. For handy use and navigation in folders and files, the unit supports Russian characters.

Accessories

LCD TV A/V cable Antenna Reverse cable Earphones Car power adapter MiniUSB-USB cable Driver CD disc Stand Remote controller Power AC/DC adapter Instruction manual Warranty card

Consumer Information

Earphone operation precautions

• Please don’t tune your headphone/ earphone to a too high volume; otherwise it may lead inconvenience and danger to yourself and other people.

2 3

Control elements

Front panel

Remote controller

1 2 3 4 5 6 7

1. IR sensor

2. LCD display

3. VOL+/VOL- buttons

4. MENU button

5. POWER button

6. TV/AV button

7. CH+/CH- buttons

Back panel

1 2 3 4 5 6

1. USB slot

2. SD/MMC card slot

3. AV control socket

4. AV in jack

5. Earphone jack

6. Power jack

Not indicated: Antenna in (back panel)

POWER button

/ Volume up/down buttons

Mute button

USB/SD button

~ Number buttons

/ Channel +/- buttons

Menu button

Repeat button

16:9/4:3 mode button

Mode button

Double digit button

Setup button

Picture button

Enter button

Back to main menu button

/ / / Cursor buttons

/ Previous/next skip buttons

/ Rewind/Fast forward buttons

Instruction manual

Please align the RC with the infrared-

receiving window on TV set in operation.

Never squeeze, drop, wet or disassembly

the RC.

Never press any button continuously and

swiftly. Operation interval is at least 2 seconds.

Battery installation

Insert the battery according to the picture above, observing the correct polarities (+) and (-). Use one Cr2025 size battery. If the RC fails to work even operated near the unit, replace the battery. Do not use rechargeable batteries. Remove the battery when the RC will not be in use for a long time.

Button functions

POWER/ button: Press this button to turn on or off the unit.

MENU/ display the on-screen menu.

AV/TV button: Press this button to switch between video sources.

disappears; press it again or press VOL+/VOLor When sound is muted, a corresponding symbol appears on the display.

VOL-/VOL+

button, the volume of TV set decreases.

Press VOL+/

button: Press this button to

button: Press this button, sound

/ buttons to resume a normal sound.

/ buttons: Press VOL-/

button, the volume of TV set

increases.

CH+/CH- /

button, the number of TV channel increases. Press CH-/

channel decreases.

Number buttons When the channel is a one-digit figure, just press the corresponding number button. If the channel is a two-digit figure, you should

press display screen before further pressing the corresponding number buttons.

button: Press this button to select

source: TV/AV/SD/USB.

button: While playing a file from USB/ memory card, press to select a playback repeat mode.

button: Press this button to select USB or memoty card, when both are connected to the unit (preferentially the memory card will be played by the unit).

/ buttons: While playing a file from USB/memory card, press to select fast forward or reverse playback speed: X2=>X4=>X8=>X16=>X32=>normal.

button: While playing a file from USB/ memory card, press to stop playback.

button: Press to enter setup menu.

button: Press to confirm selected options.

/ buttons: While playing a file from USB/memory card, press to select previous or next file.

button: While playing a file from USB/ memory card, press to pause or resume playback.

button: While navigating folders and files, press to go back to the main menu.

button: Press to select picture display format.

button: Press to select picture mode Standard/Bright/Soft/Gorgeous.

/ buttons: Press CH+/

button, the number of TV

~ and button:

button first to show - - on the

Cursor buttons ( / / / ): Press to navigate in various menus. While playing a picture file from USB/memory card, press to rotate the picture.

Installation and connection

Stand installation:

• Release the metal washer on the top of the bracket but do not separate it from the bracket.

• Insert the metal washer with the bracket into a hollow at the back of the unit and move the bracket up to a suitable height.

• Tighten the front screw up on the bracket to fix the stand with the unit.

• Control the screen angle with the lateral screw.

• Screw the stand to the bracket.

Connection of the antenna:

Plug the antenna into the Antenna in slot

situated on the rear panel of the unit.

system

Instruction manual

Connect to AV system video out

video out

audio out

Connect to AV system audio out

Connect to car backing camera

Connection of earphone:

Connect the headphone to the earphone jack for private listening. The speakers will not operate when headphones are connected.

Connection to power source:

Connect one round end of attached AC/DC adaptor or car adaptor to the power source input socket and the other end to the wall outlet at the suitable voltage. When in house, use the AC/DC adaptor; for car use, connect with the car adaptor (adaptors included should be only used). Press POWER/

button to turn on

the unit.

AV input connection

Connect the AV cable as showed in the picture below. After connection, switch the unit to the AV mode.

Car backing signal connection

Using the control wire included, connect the AV switch control socket to car backing. When backing, the unit will automatically switch to AV mode; so, if a rear view camera is connected to the unit, the display will show the picture of behind the vehicle.

USB connection

Connect the included Mini USB-USB cable to the USB slot of the unit. Then connect a USB to the other end of the cable. The display will show a menu of contents, from which you can select files for playback. To disconnect the USB, just pull it out from the cable.

Memory card connection

Insert an SD/MMC memory card into the slot

Instruction manual

in the bottom of the unit (observe the correct direction). The display will show a menu of contents, from which you can select files for playback. To disconnect the memory card, just pull it out from the slot.

Menu operation

AV Mode/USB mode

Press MENU or button to access setting

menu for picture, audio and function.

Press CH+/CH- buttons or

to choose the parameter you need to adjust. Then press VOL+/VOL- buttons or

adjust the parameter.

PICTURE

BRIGHT CONTRAST COLOR

AUDIO

VOLUME

FUNCTION

SIGNAL SLEEP

LANGUAGE ZOOM

FUNCTION: Signal is for selecting AV or TV signal; Sleep is for choosing the period (in minutes) until the automatic turning off;

/ buttons

/ to

is for changing vertical position of the image; Zoom is for changing the screen size; Language is for selecting the on-screen menu language.

TV Mode

Press MENU or button to access setting

menu for picture, audio, TV and function.

Press CH+/CH- buttons or

to choose the parameter you need to adjust. Then press VOL+/VOL- buttons or

adjust the parameter.

PICTURE

BRIGHT CONTRAST COLOR

AUDIO

VOLUME

AUTO-SEARCH SEARCH S-ROLOC S-SYS FINE SKIP

FUNCTION

SIGNAL SLEEP

LANGUAGE ZOOM

/ buttons

/ to

+ 13 hidden pages