Hyundai H-DVD5062 User Manual [ru]

H-DVD5062

DVD-ПРОИГРЫВАТЕЛЬDVD PLAYER

Руководство по эксплуатации Instruction manual

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Utilization of the product Important safeguards Supported formats

Connection

Video/audio system connection

Operation

Front panel Rear panel

Remote controller

Changing the battery

Button functions

Open/close

Power

Title Subtitle

Angle

Play/pause

Cursor buttons Number buttons Enter

Stop

Step FWD REV PREV/NEXT Prog Slow Setup N/P

Repeat

A-B DVD/USB Language PBC Direct

Resume

Zoom

Volume+/Volume-

Mute

Display

Time

Copy

Return

System setup

General setup

Audio setup

Dolby setup

Video setup

Mpeg4 subtitle setup

Preference setup

Other functions

Ripping

MP3/JPEG/compressed video playback

How to create a playlist

Copying data

Deleting data from USB

General information

Handling compact discs

Cleaning discs

Troubleshooting

Accessories

Specification

8 9 9 9 9 9 9 9 9 9 9

9 9 9

9 10 10 10 10 10 10 11 11 11 12 12 12 12 13 14 14 14 14 14 14 15 15 16

2 3

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

Alerts the user to the presence of dangerous voltage within the product’s enclosure.

Alerts the user to the presence of important operating instructions.

To reduce the risk of electric shock

W a rning

or fire, do not open the cover. Refer

RISK OF ELECTRIC SHOCK

DO NOT OPEN

servicing to qualified service personnel.

This mark indicates this unit belongs to class 1 laser product.

• To prevent the risk of fire or electric shock, don’t allow water to come into contact with the device and don’t use the device in high humidity conditions.

• The device is equipped with high voltage components and a laser system, hence you shall not open the device and repair it by yourself. The laser beam is dangerous to eyes when the housing is removed. Don’t look at it.

• When the device is moved from cold premises to the warm room or vice versa, condensate may form on the laser head and the device may not operate properly. In this case please turn the device on for 1-2 hours without disc before playback to heat it to a proper operation temperature.

• Don’t try to manually open or close the

disc tray to load discs.

• Disconnect the receiver only when there is

no disc therein.

• If you are not going to use the device for a

long time disconnect it from the wall outlet.

• Before turning the device on, please make sure that you have connected it properly, adjust the volume of speakers and amplifiers of your radio system to the minimum. Adjust the volume as necessary only after normal playback has started to avoid damage of your audio system.

• Use supply sources of rated voltage, otherwise the unit may not function or may be damaged.

• Place the unit on a horizontal surface. Keep the unit ventilated. Don’t block the heat hole. Overheat may cause malfunction.

• Do not place any objects on the player’s cover, this may make it function improperly (incorrect playback).

• Please place the device in a dry and well-aired area. Do not place it near heating units or expose it to direct sunlight, mechanical vibration, humidity or excessive dust.

• If using power plug and appliance coupler as a cutting-connecting device, it should be operated easily.

• Never use liquid detergents, abrasives or organic compounds (alcohol, gasoline, etc) to clean the unit body.

Before you start

• Keep the unit away from water or high humidity. It is strongly forbidden to place any utensil with liquid such as vase on the top of the unit.

• All repairs and technical service should be made by qualified specialist from service centers.

All images provided herein are schematic drawings of real objects and may differ from their real images.

Supported formats

Disc types

DVD

MPEG4 (DivX)

Video-CD (VCD)

Super-VCD (SVCD)

CDDA

MP3

Kodak Picture CD

JPEG

Symbol Contents

Compressed digital audio - video

Digital audio

Compressed digital audio

Compressed digital static image

Connection

Video/audio system connection

Before you start connection of external devices, ensure that power of the unit is switched off.

Following outputs are available in this unit.

Composite video

Use the cable with yellow plug of an AV cable to connect the composite video output of this unit to the video input of a TV/monitor.

SCART

Use a 21-pin SCART cable to connect the SCART output of this unit to the TV/monitor SCART input.

5.1CH audio

Use 3 pairs of audio cables to connect the

5.1 CH audio outputs of this unit to the 5.1 channel inputs of external audio amplifiers or other players.

Stereo audio

Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of this unit to the stereo inputs of a TV or a power amplifier.

Coaxial digital audio

Use a special coaxial cable to connect the coaxial output of this unit to the coaxial input of an external device (e.g. amplifier with).

Optical

Use the special optical cable to connect the optical audio output of this unit to the optical input of power amplifier.

Component video

Use a 3-core AV cable to connect the component outputs of this unit to the corresponding inputs of a TV/monitor.

S-video

Use an S-Video cable to connect the S-Video output of this unit to the S-Video input of a TV/monitor.

• The connection you should make depends on the TV/monitor input terminals. Don’t make all the connections at the same time; otherwise the produced picture will be affected.

• The physical connection should accord to

the audio output setup of this unit.

Operation

Control elements

Front panel

1. Disc slot

2. Display

3. USB port

4. OPEN/CLOSE button

5. PLAY/PAUSE button

6. MIC out jack

7. STANDBY button

Rear panel

1 2 3

1 2 3 4 5 6 7

4 5 6 7 8 9

1. Power cord

2. Stereo R/L audio output

3. Component video output

4. Digital coaxial output

5. Composite video output

6. S-Video output

7. Optical output

8. 5.1CH audio output

9. SCART connector

Operation

Remote controller (RC)

3 4 5 6 7 8

13 14 15

19 20 21

22 23 24 25

29 30

10. PBC button

11. SETUP button

12. REV/FWD buttons

13. PLAY/PAUSE button

14. STOP button

15. COPY button

16. MUTE button

17. OPEN/CLOSE button

18. DVD/USB button

19. TIME button

20. A-B button

21. REPEAT button

22. N/P button

23. SLOW button

24. MENU button

25. RESUME button 29. VOLUME+ button

26. PROG button 30. DIRECT button

27. ANGLE buttons 31. VOLUME- button

28. PREV/NEXT button 32. RETURN button

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert the batteries into the battery compartment making sure that the correct polarity is observed.

3. Install the cover back.

1. POWER button

2. Digit buttons

3. ZOOM button

4. DISPLAY button

5. TITLE button

6. STEP button

7. SUBTITLE button

8. LANGUAGE button

9. Cursor ( button

/ / / ) buttons/ENTER

1 2 3

• Use two AAA/1.5V batteries for the RC. The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

• Take the battery out of the RC if it is not used for a long time.

• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

Operation Operation

Button functions

OPEN/CLOSE

Press OPEN/CLOSE button when power is on, the disc tray is pushed out. Put the disc on the tray with the title faced up. Press OPEN/ CLOSE button again to close the disc tray and the unit starts playing automatically.

POWER

When playing, press STANDBY button on the panel or POWER button on the RC to turn off the unit, and standby mode will be activated; press the button again, to turn on the unit and it will start playing.

TITLE

When playing a DVD disc, press TITLE button to return to the main title menu of the disc.

SUBTITLE

When playing a disc with multi-language subtitle, press SUBTITLE button continually, the subtitle languages are changed in a circle, and you can select the needed one.

ANGLE

When playing the disc with multi-angle, press ANGLE button to select the view angle.

• When playing DVD disc, press MENU button

once to return to the main menu of the disc.

• When playing SVCD, VCD2.0, after the disc is loaded, the unit will display the chapter menu (if PBC is on). Also, you can display this menu by pressing MENU button.

PLAY/PAUSE

When playing the disc, press PLAY/PAUSE button once to pause; press PLAY/PAUSE button again to return to normal playback.

Cursor buttons

Press cursor buttons to navigate in various menus.

Number buttons

Press number buttons to input digits and numbers (e.g. track/chapter number, playback time etc.).

ENTER

Press ENTER button for confirmation of chosen options.

STOP

When playing DVD, SVCD, VCD, CD disc, press STOP once, the unit will memorize the previous ending point; when afterwards you play the same disc, playback will start from the memorized point. Press STOP button two times, playback will stop without memorizing the stop point.

This function is only active when ON is

set for Last Memory item in General setup page.

STEP

When playing DVD, SVCD, VCD disc, press STEP repeatedly to play video frame by frame. Press PLAY/PAUSE button to resume normal playback.

FWD

Press this button for quick forward search. Search speed will increase with each pressing: 2X => 4X => 8X => 16X => 32X => normal.

REV

Press this button for quick rewind search. Search speed will increase with each pressing: 2X => 4X => 8X => 16X => 32X => normal.

PREV/NEXT

• When playing DVD disc, press PREV

button to go to the previous chapter.

• When playing SVCD, VCD, CD disc, press

PREV button to go to the previous track.

• When playing DVD disc, press NEXT

button to go to the next chapter.

• When playing SVCD, VCD, CD disc, press

NEXT button to go to the next track.

8 9

PROG

• If the disc contains 2 or more tracks, chapters or titles, set up the playing order to your preference. Press PROG button to enter program menu.

• Press number buttons to input the number of the track, title or chapter. If programmed tracks are over ten, select NEXT item and press ENTER button to go on programming. Maximum 20 programmable items are possible. Use cursor buttons to move the cursor to START item. Press ENTER button to start program playback. Press PROG button to cancel programming.

For MP3 disc, this function is not

available.

SLOW

Press SLOW button repeatedly to change slow playback speed as follows: X2 => X4 => X8 => X16 => normal.

SETUP

Press SETUP button to enter or exit the system setup menu.

and the ending point (B) to select the repeat fragment.

• Press A-B button the third time to cancel

fragment repeat and return to normal play.

DVD/USB

Press this button to switch between disc and

USB playback (if they are inserted into the unit).

Operations with files contained in a USB

storage are the same as for discs.

LANGUAGE

When playing DVD with more than one audio stream, press this button to select the needed language.

PBC

Press this button to turn on or off Playback Control (PBC) function.

DIRECT

If a DVD disc contains a warning or notice message or an advertisement clip, press this button to skip them and go directly to the disc contents.

N/P

Press N/P button to select between PAL/ Multi/NTSC video mode. This function is only available when no disc is inside the unit.

REPEAT

Press REPEAT button to repeat a title, chapter, track or the whole disc.

• When playing DVD disc, press REPEAT button continually to repeat chapter => title => all => repeat off.

• When playing SVCD, VCD, CD disc, press REPEAT button continually to repeat track => all => repeat off.

• When playing MP3 disc, press REPEAT button continually to play single => repeat track => repeat all => repeat off.

A - B

• Press A-B button at the start point (A)

RESUME

Press this button to go back to current playback after activating the disc title menu with TITLE button.

ZOOM

When playing DVD, SVCD, VCD disc, press ZOOM button to zoom in the picture as follows: 2x => 3x => 4x => normal. In zoom in mode, press cursor buttons to move the picture for viewing.

VOLUME+/VOLUME-

Press VOLUME+ button to adjust volume up. Press VOLUME- button to adjust volume down.

MUTE

Press MUTE button, the sound will be turned off. Press MUTE button again, the sound will resume.

Operation

DISPLAY

Press DISPLAY button to display various info on the current playback: title/chapter time elapsed/remaining, etc.

TIME

Press TIME button to input chapter/title number or disc time. Playback will start in accordance with the input data.

COPY

Press to enter Ripping menu. A CD and a USB should be inside the unit.

RETURN

When playing DVD, Super-VCD or VCD2.0 discs, press RETURN button to go to the disc menu. Press the button again to return to current playback. This function is not available when PBC is off.

System setup

1. Press SETUP button to enter the setup menu. In Setup menu, press SETUP button again to quit the setup page.

2. Use General setup, Audio setup, Dolby setup, Video setup, Mpeg4 subtitle setup, Preference page.

3. Press button to enter the setup page selected.

4. Use want to adjust.

5. Press

list. Use and press ENTER button to confirm and

button to return to options list.

6. To return to setup page list press button when in the option list.

is memorized and kept after power is off.

/ buttons to choose a setup page:

/ buttons to select the option you

button to enter the adjustment

/ buttons to select the adjustment

Items in gray can’t be set up. The setup

General setup

General Audio Dolby Video MP4sub Prefer.

General Setup Page

TV fromat Angle mark OSD lang Captions Screen saver Last memory

• TV format

Normal/PS: When the unit is connected to the normal TV set, the wide-screen image is shown on the full screen, but some part is cut off.

Normal/LB: When the unit is connected to the normal TV set, the wide-screen image is shown and black stripes appear on the top and bottom of screen.

Wide: Use this item when the unit is connected to the normal TV set, if you want to squeeze the picture.

• Angle Mark

When playing DVD disc with multi-angle view, if selected ON, the angle mark is shown.

• OSD Lang

Select on-screen display language.

• Captions

This function doesn’t work when the disc is without caption. If the caption is OFF, press SUBTITLE button on the remote control to make caption on. The default setup is ON.

• Screen Saver

If the SCREEN SAVER is set ON and the unit is turned on without a disc playing for several minutes, a moving picture appears on the screen, and the unit will go to standby mode after several minutes. You can press POWER button to wake it up.

• Last Memory

When this function is on, the unit can memorize the time elapsed from the last time you played the disc. Then at the next playing, it will resume playing from the memorized time.

This function is active only for power

switch-off. If, after stopping playback, you

+ 23 hidden pages