Hyundai H-DVB03T2 User Manual [ru]

H-DVB03T2

MULTIMEDIA PLAYER WITH DVB-T2 RECEIVER

МУЛЬТИМЕДИЙНЫЙ ПЛЕЕР

С DVB-T2 ПРИЕМНИКОМ

Руководство по эксплуатации Instruction manual

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Important safeguards Utilization of the product

Connection

Operation

Control elements

Front panel Rear panel

Remote controller

Changing the battery General operation OSD operation

Main Menu

Media Player

Edit Channel

Installation

System Setup

Tools USB information

General information

Troubleshooting Accessories Supported formats Specifications

2 3 3 3 4 4 5 5 5 5 6 6 7 8 8 8

9 10 10 12 12 13 13 13 14 14

Before you start

Important safeguards

• To prevent risk of fire or electric shock, avoid merging the unit into the water or under conditions of high humidity.

• Switch off the device from the socket, if you’re not going to use it for a long time.

• Do not place objects on the device.

• Place the unit in a dry and ventilated area. Eliminate proximity to heaters, do not expose to sunlight, mechanical vibration, humidity and dusty environment.

• It is possible to use a small amount of neutral detergent to clean the device.

• Never use abrasive materials or organic substances (alcohol, gasoline, etc.) to clean the device.

• For repair and maintrnance contact only authorized service centers.

• Before connecting the device to the mains, please make sure the network cable can be easily disabled at any time.

• Unplug from the mains and from the cable television antenna, unless you intend to use it for a long time, or before a thunderstorm. Do not touch the unit, power cord and antenna cable during a thunderstorm!

• Before you turn on the device, please check the reliability of its connection to the power supply and other devices.

• This unit can not receive television signals during the movement of the vehicle.

• After prolonged exposure to cold, before turning on leave the device for 1 hour at a room temperature.

Utilization of the product

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Before using this product, carefully read the manual. After you read, save it for future use. If necessary, contact your local dealer for service.

All the illustrations in this manual are schematic images, which may differ from actual objects.

Connection

Antenna input

• Connect an external DVB-T antenna

(cable) connector to the antenna RF IN.

The signal in the block cable antenna can fail to contain DVB-T/T2 signal due to the carrier frequency altered by the cable network operator.

RF output

• Connect the RF output jack to an antenna cable to bypass the digital signal to other devices.

HDMI-out

• If your TV has an HDMI video output, connect it to an HDMI output of this unit using a special HDMI cable (not included).

Coaxial output

• Connect the coaxial digital audio output to the input of an amplifier to transmit the audio signal to the amplifier using a special coaxial cable (not included).

Stereo audio output

• Connect the left (white) and right (red) terminal of the stereo audio output to the corresponding audio inputs on your TV using the supplied RCA-type cable.

Composite video (CVBS) output

• Connect the yellow video output to the composite video input on your TV using the included RCA cable for transmitting the composite video signal.

Component video output

• Connect the component video output to component video input on your TV using a special cable (not supplied) to send component video signal.

Controllers

Front panel

1 2 3 4 5 6 7

1. USB port

2. Power/Standby indicator

3. IR sensor

4. Display

5. CH- button

6. CH+ button

7. Power/Standby button

Operation

Rear panel

8 9 10 11 12 13 14

8. RF out

9. RF in

10. Digital coaxial output

11. HDMI port

12. AV (RCA) output

13. Component output (YPbPr)

14. AC in

Operation

Remote controller

7 8

9 10

11 12

1. STANDBY button

2. Numeric buttons

3. MENU button

4. TV/R button

5. Navigation buttons

6. SUB-T button

7. TEXT button

8. AUDIO button

9. PREV button

10. REW button

11. USB button

12. REC button

13. MUTE button

14. LAST button

15. EXIT button

16. OK button

17. INFO button

18. FAVOR button

19. EPG button

20. NEXT button

21. FF button

22. PLAY/PAUSE button

23. STOP button

Changing the battery

1. Remove the battery compartment cover

18 19

20 21

22 23

on the back of the RC.

2. Insert two AAA batteries into the battery compartment making sure that the correct polarity is observed.

3. Install the cover back.

• The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

• Take the battery out of the RC if it is not used for a long time.

• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

Operation

General operations

STANDBY

When this unit is connected to the mains, it goes into operation mode. When the unit is running, press STANDBY button to turn the device into sleep mode. In sleep mode, press STANDBY button on the remote or press and hold this button on the panel to turn the device from sleep mode.

INFO

When viewing a TV channel, press this button to display/hide the menu pages containing various information about the current channel (frequency, reception level etc.).

EPG

Press EPG button to display the menu of the electronic TV guide (Electronic Program Guide), which displays the schedule of programs for a certain period of time for each available channel. Using this function, you can easily find programs you are interested in. Use UP/DOWN cursor buttons to select the desired TV program. Use LEFT/RIGHT cursor buttons to switch pages of the interactive program guide.

EPG-information cannot work if the

service is not provided by operator.

AUDIO

Press AUDIO to select the audio language or audio channel, if this choice is supported by the current channel.

CH+/CH-

Press these buttons to select the previous or next channel.

Navigation

Press these buttons to navigate through the various menus.

OK Press this button to confirm the selection

options in the menu.

VOL-/VOL+ Press these buttons to adjust the sound

volume level.

Numeric buttons

Press number buttons to enter the channel number you want or other numbers (such as passwords, play time, etc.).

REWIND/FAST FORWARD

When playing a media file, press these buttons for fast forward (FF) or backward playback (REW).

PAUSE

When playing a media file, press this button to set the playback to pause.

PLAY

Click this button to start playing a media file.

Red/Green/Yellow/Cyan buttons

Press the colored buttons to perform various operations in the edit menu of channels, teletext recording.

MUTE

Press this button to enable/disable the sound.

TEXT

Press this button to enable or disable the Teletext (Teletext is not supported by some TV channels).

LAST

Press this button to return to the last viewed channel.

RECORDING

When a USB drive is connected to this unit, while watching TV channels press REC to start recording video from the channel to USB. Press STOP button to stop recording.

Operation

SUBTITLE

Click the SUB-T button to select subtitle language, if this choice is supported by the current channel.

TV/RADIO

Press TV/R button to switch between TV and radio.

PREV/NEXT

When playing a media file, press these buttons to select previous/next file.

STOP

When playing a media file, press this button to stop playback.

USB

Press this button to enter the USB setup interface.

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the

RC to select setting page.

3. Press OK button on the RC to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the

RC to select a parameter to adjust.

5. Press LEFT/RIGHT cursor buttons on the

RC to adjust the selected parameter.

6. Press MENU button to return to the previous menu page. Press EXIT button on the RC to quit the menu.

Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Main menu

Press the MENU button on the RC to browse

the main menu.

Media Player Edit Channel Installation System Setup Tools

EXIT ОК

Return Confirm

Main menu

Media Player

PVR Video Music Image

EXIT ОК

Return Confirm

• PVR: Rename: Press RED button to rename the

chosen item.

Lock: Press GREEN button to lock the

chosen item.

Delete: Press YELLOW button to delete the

chosen item.

Switch: Press numeric button 5 to switch

between submenus of Media Player

• Video:

Edit: Press BLUE button to edit the chosen item. In this submenu, press RED button to rename, press GREEN button to copy, press YELLOW button to delete and press BLUE

Media Player

Operation

button to open a new folder.

Switch: Press numeric button 5 to switch

between submenus of Media Player.

Sort: Press numeric button 6 to sort

channels.

Play mode: Press numeric button 8 to select

play mode: Single/All/Random

• Music: Play List: Press numeric button 1 to display

play list.

FAV: Press numeric button 2 to set the

chosen songs in Favorites.

FAV ALL: Press numeric button 3 to set all

songs in Favorites.

Edit: Press numeric button 4 to edit. In this submenu, press RED button to rename, press GREEN button to copy, press YELLOW button to delete and press BLUE button to open a new folder.

Switch: Press numeric button 5 to switch between submenus of Media Player.

Sort: Press numeric button 6 to sort channels.

Repeat: Press numeric button 7 to choose play mode: Single repeated/All/Random

• Image:

Play List: Press RED button to display play list.

FAV: Press GREEN button to set the chosen images in Favorites.

FAV ALL: Press YELLOW button to set all images in Favorites.

Edit: Press BLUE button to edit. In this submenu, press RED button to rename, press GREEN button to copy, press YELLOW button to delete and press BLUE button to open a new folder.

Switch: Press numeric button 5 to switch between submenus of Media Player.

Sort: Press numeric button 6 to sort channels.

Setup: Press numeric button 7 to enter playback setting.

MultiView: Press numeric button 8 to display

multi images.

Edit Channel

TV Channel List Radio Channel List Delete All

EXIT ОК

Return Confirm

• TV Channel List:

Open TV Channel List. To the left is the list of all TV channels or free channels, to the right is a window for previewing the selected channel, and at the bottom is the navigation guide for all operations such as:

Choose Channel: Use CH / buttons to select channels and press OK button to start watching.

Lock: Press RED button to lock the current channel.

Skip: Press GREEN button to set the current channel to be skipped when browsing channels.

Move: Use CH / buttons to reorder the channel list.

Edit: Press BLUE button to enter in edit interface. Press RED button to sort channels in different orders. Press GREEN button to edit current channel. Press BLUE button to delete the current channel.

• Radio Channel List:

The radio channels are edited in the same manner.

• Delete All:

Press OK button to delete all TV and Radio channels. Follow the instructions on the screen.

+ 20 hidden pages