Hyundai H-DVB01T2 User Manual [ru]

H-DVB01T2

MULTIMEDIA PLAYER WITH DVB-T2 RECEIVER

МУЛЬТИМЕДИЙНЫЙ ПЛЕЕР

С DVB-T2 ПРИЕМНИКОМ

Руководство по эксплуатации Instruction manual

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Important safeguards Utilization of the product

Connection

Operation

Control elements

Front panel

Rear panel Remote controller

Changing the battery General operation OSD operation

Program

Picture

Channel search

Time

Option

System

USB USB information Scheduled recording Time Shift

General information

Troubleshooting Accessories Supported formats Specifications

2 3 3 3 4 4 5 5 5 5 6 6 7 8 8 9 9

9 10 10 10 11 11 11 12 12 12 13 14

Before you start

Important safeguards

• To prevent risk of fire or electric shock, avoid merging the unit into the water or under conditions of high humidity.

• Switch off the device from the socket, if you’re not going to use it for a long time.

• Do not place objects on the device.

• Place the unit in a dry and ventilated area. Eliminate proximity to heaters, do not expose to sunlight, mechanical vibration, humidity and dusty environment.

• It is possible to use a small amount of neutral detergent to clean the device.

• Never use abrasive materials or organic substances (alcohol, gasoline, etc.) to clean the device.

• For repair and maintrnance contact only authorized service centers.

• Before connecting the device to the mains, please make sure the network cable can be easily disabled at any time.

• Unplug from the mains and from the cable television antenna, unless you intend to use it for a long time, or before a thunderstorm. Do not touch the unit, power cord and antenna cable during a thunderstorm!

• Before you turn on the device, please check the reliability of its connection to the power supply and other devices.

• This unit can not receive television signals during the movement of the vehicle.

• After prolonged exposure to cold, before turning on leave the device for 1 hour at a room temperature.

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Before using this product, carefully read the manual. After you read, save it for future use. If necessary, contact your local dealer for service.

All the illustrations in this manual are schematic images, which may differ from actual objects.

Connection

Antenna input

• Connect an external DVB-T antenna

(cable) connector to the antenna RF IN.

The signal in the block cable antenna can fail to contain DVB-T/T2 signal due to the carrier frequency altered by the cable network operator.

RF LOOP output

• Connect the output RF LOOP jack to TV's antenna input using a special adapter (not included) for supplying an analog TV signal.

HDMI-out

• If your TV has an HDMI video output, connect it to an HDMI output of this unit using a special HDMI cable (not included).

Coaxial output

• Connect the coaxial digital audio output to the input of an amplifier to transmit the audio signal to the amplifier using a special coaxial cable (not included).

Stereo audio output

• Connect the left (white) and right (red) terminal of the stereo audio output to the corresponding audio inputs on your TV using the supplied RCA-type cable.

Composite video (CVBS) output

• Connect the yellow video output to the composite video input on your TV using the included RCA cable for transmitting the composite video signal.

Component video output

• Connect the component video output to component video input on your TV using a special cable (not supplied) to send component video signal.

Controllers

Front panel

1 2 43 5 6 7 8

1. POWER button

2. Display

3. IR sensor

4. USB-port

5. ОК button

6. MENU button

7. CH+/CH- buttons

8. VOL+/VOL- buttons

Rear panel

Operation

1 2 3 4 5 6 7 8

1. Antenna input

2. RF LOOP output

3. HDMI output

4. Coaxial output

5. Stereo audio output

6. Composite (CVBS) video output

7. Component video output

8. Power cable

Operation

Remote controller

12. PAUSE button

13. PLAY button

14. Red/Green/Yellow/Cyan buttons

15. MUTE button

16. TTX button

17. PVR button

18. SUBTITLE button

19. VOL+ button/RIGHT cursor buttons

20. TV/RADIO button

21. RECALL button

22. GOTO button

23. PREV/NEXT buttons

24. STOP button

25. REPEAT button

Changing the battery

24 25

1. Remove the battery compartment cover

on the back of the RC.

2. Insert two AAA batteries into the battery compartment making sure that the correct polarity is observed.

3. Install the cover back.

• The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

• Take the battery out of the RC if it is not used for a long time.

• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

1. STANDBY button

2. INFO button

3. EPG button

4. AUDIO button

5. CH+ button/UP cursor button

6. ОК button

7. VOL- button/LEFT cursor button

8. CH- button/DOWN cursor button

9. FAVOURITE button

10. Number buttons

11. REV/FWD buttons

Operation

General operations

STANDBY

When this unit is connected to the mains, it goes into operation mode. When the unit is running, press STANDBY button to turn the device into sleep mode. In sleep mode, press STANDBY button on the remote or press and hold this button on the panel to turn the device from sleep mode.

INFO

When viewing a TV channel, press this button to display/hide the menu pages containing various information about the current channel (frequency, reception level etc.).

EPG

Press EPG button to display the menu of the electronic TV guide (Electronic Program Guide), which displays the schedule of programs for a certain period of time for each available channel. Using this function, you can easily find programs you are interested in. Use UP/DOWN cursor buttons to select the desired TV program. Click OK button. This will display more detailed information on the TV program. Use LEFT/RIGHT cursor buttons to switch pages of the interactive program guide.

EPG-information cannot work if the

service is not provided by operator.

AUDIO

Press AUDIO to select the audio language or audio channel, if this choice is supported by the current channel.

CH+/CH-

Press these buttons to select the previous or next channel.

Cursor

Press these buttons to navigate through the various menus.

Press this button to confirm the selection

options in the menu.

VOL-/VOL+ Press these buttons to adjust the sound

volume level.

FAVOURITE

Click this button to display a list of your favorite programs. Use LEFT/RIGHT cursor buttons, select a category of programs, use UP/DOWN cursor buttons to select the desired program and press OK to view it.

The number buttons

Press number buttons to enter the channel number you want or other numbers (such as passwords, play time, etc.).

REV/FWD

When playing a media file, press these buttons for fast forward or backward playback.

PAUSE

When playing a media file, press this button to set the playback to pause.

PLAY

Click this button to start playing a media file.

Red/Green/Yellow/Cyan buttons

Press the colored buttons to perform various operations in the edit menu of channels, teletext recording.

MUTE

Press this button to enable/disable the sound.

TTX

Press this button to enable or disable the Teletext (Teletext is not supported by some TV channels).

PVR

When ta USB drive is connected to this unit, while watching TV channels press PVR to start recording video from the channel to USB.

Operation

Press STOP button to stop recording.

SUBTITLE

Click this button to select subtitle language, if this choice is supported by the current channel.

TV/RADIO

Press this button to switch between TV and radio.

RECALL

Click this button to select the last-viewed channel.

GOTO

During playback of audio or video file, press this button to open the window in which with the help of number buttons you can input the file playback time to start playback from. After entering the time, press OK button to confirm.

PREV/NEXT

When playing a media file, press these buttons to select previous/next file.

STOP

When playing a media file, press this button to stop playback.

REPEAT

When playing a media file, press this button to select the repeat mode: Repeat a single file, folder repeat, repeat all the content, cancel repeat (repeat modes available may vary depending on different types of files).

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the

RC to select setting page.

3. Press OK button on the RC to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the

RC to select a parameter to adjust.

5. Press LEFT/RIGHT cursor buttons on the

RC to adjust the selected parameter.

6. Press MENU button to return to the previous menu page. Press EXIT button on the RC to quit the menu.

Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Program

Program edit EPG Sort LCN

EXIT ОК

Return Confirm

• Program edit: input the password

(888888) to access the editing menu. This menu enables you to edit program lists by locking, deleting, skipping and moving them.

Move: Select a program and press Red button on the RC, the program will be marked with an icon. Select new position for this program and press OK button; the program will be moved to the selected position.

Skip: Select a program and press Green button on the RC; the program will be marked with an icon. The selected program will be skipped when you switch programs.

Lock: Select a program and press Yellow button on the RC; the program will be marked with an icon. The selected program will be locked for choosing.

Delete: Select a program and press Cyan button on the RC; the program will be deleted.

Favorite: See «General operations» program for more details about Favourite program list.

Operation

Rename: Select a program and press RECALL button; press cursor buttons to choose a character in the virtual keyboard and confirm with OK button.

• EPG: See «General operations» program

for more details about Electronic Program Guide.

• Sort

LCN: sort the channels in ascending order according to their logical channel number.

By Service Name: sort the channels in alphabetical order.

By Service ID: sort the channels according to the stations.

• LCN

Set logical channel number on/off.

Picture

Aspect ratio Resolution Tv format Video output

EXIT ОК

Return Confirm

• Aspect ratio: 4:3 LB/4:3 PS/4:3 Full/16:9

Wide screen/Auto/16:9 Pillar Box/16:9 Pan&Scan.

• Resolution: 576i/576p/720p/1080i/ 1080p

(50 Hz).

• TV format: select color system PAL/

NTSC.

• Video output: select component (YPbPr)

or composite (CVBS) video output mode.

Channel search

Auto search Manual search Country Antenna power

EXIT ОК

Return Confirm

• Auto search: press OK button to start

automatic search and saving of all available channels. Press MENU or EXIT button to quit search.

• Manual search: Press OK button to enter

the manual search menu. Press LEFT/RIGHT cursor buttons to select the channel frequency. Press OK button to start search of the new channel. When the new channel is ready, it will be addded to the channel list.

• Country: select your country.

• Antenna power: to get a stable and

quality signal when you use an antenna without built-in amplifier, set this option to On. When using cable TV or an antenna with built-in amplifier set this option to On.

Time

Time Offset Country region Time zone Sleep Power On/Off

EXIT ОК

Return Confirm

• Time Offset: set the GMT time zones

automatically or manually.

• Country region: select you region if Time

+ 20 hidden pages