Hyundai H-CSW504 User Manual
H-CSW504
13-cm 4-WAY COAXIAL
ACOUSTIC SYSTEM
13-см 4-ПОЛОСНАЯ
КОАКСИАЛЬНАЯ
АКУСТИЧЕСКАЯ СИСТЕМА
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Dimensions Accessories
Speaker (2 pcs), Metal grill (2 pcs)
Speaker wire (2 m x 2 pcs) Screw (8 pcs)
Clip (8 pcs)
Important safeguards
• The instruction manual contains important
operating and maintenance instructions for
your safety. It is necessary to refer the manual.
• Do not install the speakers where they
may be subjected to excessive heat moisture,
2 3
dust or where they will be kicked repeatedly,
brushed or bumped.
• Before mounting and connecting the wires
be sure that wire of the negative pole terminal
is disconnected from accumulator. Nonobservance of this demand may cause a short
circuit or fire.
• To prevent short circuit never put or leave
any metal objects (e.g. coins or metal tools)
inside the acoustic system.
• Make absolutely sure that the terminals
for the speakers are connected to the proper
outputs from the music source.
• Never run the wiring on the outside of the
vehicle or under it where it can be damaged
by road hazards or the moving parts of the
vehicle. Use existing wire channels, sills,
panels and molding strips inside the vehicle to
hide the wiring for safety and a neat appliance.
• Make sure the wire of the negative pole
terminal is disconnected from accumulator
while connecting the speaker terminals.
Turn on the various components and slowly
advance the volume. Remember to check
and recheck all connections to insure proper
installation and use.
• Do not continuously use the speaker system
beyond the nominal power handling capacity.
• Keep recorded tapes, watches, and personal
credit cards using magnetic coding away from
the speaker system to protect them from damage
caused by the magnets in the speakers.
• If you cannot find the appropriate mounting
location, consult your car dealer or your
nearest dealer before mounting.
Take extreme caution when working
near the gas tank, gas lines, brake or hydraulic
lines and electrical wiring.
• When chosen a non-standard
arrangement of speakers making necessary
to cut them into panels of the automobile,
use a mould (not included). For a prefect
arrangement of the acoustic system keep up
geometry of a mould, as it is very important for
correct installation of your system (А=В=116
mm,
С=5 mm).
Mounting the speakers
Installation kits are available from your
dealer or local stereo shop to help make your
installation easy. These kits also give your
installation a clean, custom appearance.
Questions about installations methods please
consult a professional auto sound dealer/
installer for assistance.
• Choose the place of installation for
acoustic system. For most acoustic system
stipulated regular places in the automobile
approach. In this case you need to know only
assembly depth. Before installation acoustic
system check up their assembly depth.
• If it is necessary to cut steel, reinstall
the cosmetic panel in place and use the hole
you have previously cut as a template. This
will help to insure proper cutting and a good
Loading...