Hyundai H-CSQ695 User Manual

16 x 24-см 5-ПОЛОСНАЯ

КОАКСИАЛЬНАЯ

АКУСТИЧЕСКАЯ СИСТЕМА

16 x 24-cm 5-WAY COAXIAL

ACOUSTIC SYSTEM

Руководство по эксплуатации Instruction manual

H-CSQ695

2

Instruction manual

Dimensions Accessories

Speaker (2 pcs), Metal grill (2 pcs)

Speaker wire (3 m x 2 pcs) Screw (8 pcs)

Clip (8 pcs)

Important safeguards

• The instruction manual contains important
operating and maintenance instructions for
your safety. It is necessary to refer the manual.

• Do not install the speakers where they
may be subjected to excessive heat moisture,

dust or where they will be kicked repeatedly,
brushed or bumped.

• Before mounting and connecting the wires
be sure that wire of the negative pole terminal
is disconnected from accumulator. Non­observance of this demand may cause a short
circuit or fire.

• To prevent short circuit never put or leave

3

Instruction manual

any metal objects (e.g. coins or metal tools)
inside the acoustic system.

• Make absolutely sure that the terminals
for the speakers are connected to the proper
outputs from the music source.

• Never run the wiring on the outside of the
vehicle or under it where it can be damaged
by road hazards or the moving parts of the
vehicle. Use existing wire channels, sills,
panels and molding strips inside the vehicle to
hide the wiring for safety and a neat appliance.

• Make sure the wire of the negative pole
terminal is disconnected from accumulator
while connecting the speaker terminals.
Turn on the various components and slowly
advance the volume. Remember to check
and recheck all connections to insure proper
installation and use.

• Do not continuously use the speaker system
beyond the nominal power handling capacity.

• Keep recorded tapes, watches, and personal
credit cards using magnetic coding away from
the speaker system to protect them from damage
caused by the magnets in the speakers.

• If you cannot find the appropriate mounting
location, consult your car dealer or your
nearest dealer before mounting.

Take extreme caution when working
near the gas tank, gas lines, brake or hydraulic
lines and electrical wiring.

Mounting the speakers

Installation kits are available from your
dealer or local stereo shop to help make your
installation easy. These kits also give your
installation a clean, custom appearance.
Questions about installations methods please
consult a professional auto sound dealer/
installer for assistance.

• Choose the place of installation for
acoustic system. For most acoustic system
stipulated regular places in the automobile
approach. In this case you need to know only
assembly depth. Before installation acoustic
system check up their assembly depth.

• When chosen a non-standard
arrangement of speakers making necessary to
cut them into panels of the automobile, use a
mould marked by perforation on the original gift
box. For a prefect arrangement of the acoustic
system keep up geometry of a mould, as it is
very important for correct installation of your
system ( C = 5 mm).

• If it is necessary to cut steel, reinstall
the cosmetic panel in place and use the hole
you have previously cut as a template. This
will help to insure proper cutting and a good

4

Instruction manual

fit. Now, mark the locations for the speakers
mounting screws, remove the panel and drill
the screw holes. When finished you may
replace the panel.

• After cutting and drilling all holes, inspect
the mounting areas for any metal burrs or
rough edges. File any area that may interfere
with the mounting of the speaker.

• Clean any metal shavings from the
mounting area and check for areas in which
water may enter the speaker cavity. Treat the
area for water protection when necessary.

Securing the speakers

• Position the speaker into the mounting
hole and reconfirm the correct mounting
location and hole placement.

• Screw clips are provided to ensure a
snug fit. These should be placed over the
metal surface and line up the hole you have
previously drilled with the screw clip. Place
the speaker into the hole, align the holes and
proceed to insert the screws. Be sure to tighten
the screws evenly so that it will not warp the
speaker frame.

• Turn your system back on and confirm
the speakers operation first at a low volume
and then you may increase the volume as you
desire.

• After installation acoustic system and
having tested it the speaker grill will have to be
inserted. Turn on you system and follow these
steps carefully:

- locate the speaker grill;

- now carefully inspect the place where the
speaker grill will be mounted – there should be
no blowholes;

- fix the speaker grill by screws.