Hyundai H-1528 User Manual [ru]

H-1528

RADIO WITH ALARM

РАДИОПРИЕМНИК

С БУДИЛЬНИКОМ

Руководство по эксплуатации Instruction manual

Instruction manual Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.

Description

1. AL.OFF button

2. ALARM button

3. TIME button

4. SLEEP button

5. MIN button

6. SNOOZE button

7. HOUR button

8. Display

9. TUNING regulator

10. DIMMER switch (LOW/HI)

Not indicated: VOLUME/BUZZ
regulator (left panel), AUTO/OFF/ON
switch (left panel), power cord (back
panel), battery compartment (bottom).

1

2

3

4

5

6

7

8 9 10

Important safeguards

• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.

• Do not hit or drop the unit.

• Do not expose the unit to vibration,
direct sunlight, too high or low temperature or
humidity.

• If you are not going to use the unit within

2 3

a long period of time, remove the batteries to
avoid their leakage.

• Do not disassemble the unit yourselves.

Refer servicing to qualified service personnel.

Power supply

Battery operation

• Insert 1x9V battery (not included) to the

terminal inside the battery compartment. Your

set will not work normally from the battery
supply, but there is now the advantage that, in
case there is a mains current failure, your clock
will continue to work. The clock display will not
light up, the clock time and alarm setting will be
held in the clock memory by the battery back­up system.

This enables you to move the set from place
to place without re-setting the clock every time.
The battery back-up system is only meant to
be used from short temporary power failures.
For longer durations the battery may become
exhausted or there may be some deviation in
accuracy.

• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.

AС operation

• The appliance is for household use only.

• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.

• Insert the plug into the power supply.

• The set is now working as electronic clock.

General operations

Setting the clock

• Press and hold TIME button.

• Do not release TIME button; press HOUR
button or MIN button to set the clock display to
the correct time.

• Release all the buttons when finished the
setting.

Dimmer function

To adjust the brightness of the display, slide

the DIMMER switch to HI or LOW position.

Radio operation

Tuner operations

• Slide AUTO/OFF/ON switch to ON and

turn on the volume.

• Adjust the program by rotating TUNING

regulator.

• Use VOLUME regulator to adjust volume

level.

Sleep to music

The radio can be set to play and to switch off

automatically after a preset time.

• Slide AUTO/OFF/ON switch to OFF or

AUTO position.

• Press SLEEP button once.

• You can have maximum 1 hour and 59
minutes playing the radio to accompany you
to sleep.

• To set for a desired period of sleep, press
and hold SLEEP button and then press HOUR
button and MIN button simultaneously to set 1
hour 59 minutes. Press repeatedly MIN button
to set the desired period of the sleep function.

• If you want to turn off the radio before
sleep time has expired, press SNOOZE button.

Alarm operation

Setting the alarm

• Slide AUTO/ON/OFF to AUTO position.

• Press and hold ALARM button.

• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.

• Release ALARM button to show the
current time.

• The radio will play automatically at the
present time.

• If you need to wake up to buzzer, set
VOLUME/BUZZ regulator to BUZZ position by
decreasing volume until a click.

Snooze control

• When the alarm is on, press SNOOZE