Hyundai H-1525 User Manual [ru]

H-1525

ALARM CLOCK RADIO

РАДИОПРИЕМНИК

С БУДИЛЬНИКОМ

Руководство по эксплуатации Instruction manual

Instruction manual Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.

Description

1. TIME button

2. SLEEP button

3. ALARM button

4. MIN button

5. Display

6. Dial scale

7. FOCUS regulator

8. SNOOZE button

9. HOUR button

10. PROJECTION switch

11. AL.OFF button

12. TUNING regulator

13. AM/FM band switch

7

1

2
3

4

5

6

8

9

10

11

12

Not indicated: battery compartment (bottom),
ON/OFF/AUTO/BUZZ switch (left panel),
VOLUME regulator (left panel)

Important safeguards

Power supply

• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.

• Do not hit or drop the unit.

• Do not expose the unit to vibration,
direct sunlight, too high or low temperature or
humidity.

• If you are not going to use the unit within
a long period of time, remove the batteries to
avoid their leakage.

• Do not disassemble the unit yourselves.
Refer servicing to qualified service personnel.

2 3

Battery operation

• Insert 1x9V battery (not included) to the
terminal inside the battery compartment. Your
set will not work normally from the battery
supply, but there is now the advantage that, in
case there is a mains current failure, your clock
will continue to work. The clock display will not
light up, the clock time will be held in the clock
memory by the battery back-up system.

This enables you to move the set from place
to place without re-setting the clock every time.
The battery back-up system is only meant to
be used from short temporary power failures.
For longer durations the battery may become

13

exhausted or there may be some deviation in
accuracy.

• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.

AС operation

• The appliance is for household use only.

• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.

• Insert the plug into the power supply.

• The set is now working as an electronic
clock. Figures will blink on the display, showing
that you should set the clock.

Setting the clock

• Press and hold TIME button.

• Do not release TIME button; press HOUR
button or MIN button to set the clock display to
the correct time.

• Release all the buttons when finished the
setting.

Radio operation

Tuner operations

• Slide ON/OFF/AUTO/BUZZ switch to ON
and turn on the volume.

• Slide AM/FM switch to AM or FM position.

• Adjust the program using TUNING
regulator.

• Use VOLUME regulator to adjust volume
level.

Sleep to music

The radio can be set to play and to switch off

automatically after a preset time.

• Slide ON/OFF/AUTO/BUZZ switch to OFF

or AUTO position.

• Press SLEEP button once.

• You can have 59 minutes playing the radio

to accompany you to sleep.

• To set for a desired period of sleep
(maximum 1 hour 59 minutes), simply press
and hold SLEEP button and then press HOUR
button or MIN button to set the desired period
of the sleep function.

• To turn off the radio before sleep time
expires, press SNOOZE button once.

Alarm operation

Setting the alarm

• Press and hold ALARM button.

• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.

• Release ALARM button to show the
current time.

• Slide ON/OFF/AUTO/BUZZ to AUTO
position. The radio will play automatically at the
present time.

Alarm sound setting

Follow the steps of “Setting the alarm” and
slide ON/OFF/AUTO/BUZZ switch to BUZZ
position. You will be awakened by the buzzer
alarm.

Snooze control

• When the alarm is on, press SNOOZE
button once, after approximately 9 minutes the
alarm will be on again.

• If you want to stop the alarm, switch ON/
OFF/AUTO/BUZZ to OFF position or press
AL.OFF button.

Laser projection

• The unit is equipped with a laser projection
with individual time setting.