Hyundai H-1516 User Manual [ru]

H-1516
ALARM CLOCK RADIO РАДИОПРИЕМНИК С ЧАСАМИ
Instruction manual Руководство по эксплуатации
1. VOLUME regulator
2. LIGHT ON/OFF button
3. Display
4. POWER button
5. DOWN/MIN button
6. UP/HOUR button
7. 4 button
8. 2 button
9. ALM/MODE +5 button
10. 1 button
11. 3 button
12. 5 button
13. ALM SET/BAND button
14. MEMO/TIME SET button
15. AC jack
16. Speaker
Important safeguards
Caution: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
Dangerous voltage: Uninsulated dangerous voltage, that may be of sufficient magnitude to constitute a risk of electrical shock to persons, is present
within this product enclosure.
Attention: The owner’s manual contains important operating and maintenance instructions for your safety, it is necessary to refer the manual.
Power supply
AС operation
The appliance is for household use only.
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
Insert the power cord of the adaptor into the DC jack on the unit. Insert the adaptor plug into the power supply.
The set is now working as an electronic clock.
2
Setting the clock
To set time
In standby mode, press MEMO/TIME SET button, the clock display starts blinking.
Press UP/HOUR button or DOWN/MIN button to adjust the correct hour and minute.
Press the MEMO/TIME SET again to store the correct time.
Backlight function
Press LIGHT ON/OFF button once to turn on the display back light. And the light will turn off automatically in 8 seconds.
Radio operations
Tuner operations
Press POWER button to switch on the radio.
Press ALM SET/BAND button to select the desired band.
Press UP/HOUR or DOWN/MIN to adjust the desired frequency.
Keep pressing UP/HOUR button or DOWN/MIN button for few seconds, then release. The search of frequency will start automatically.
In the automatic searching progress, press UP/HOUR or DOWN/MIN to stop searching.
Radio station memory presets
This unit can store up to 10 FM and 10 AM station presets.
To store the station:
Press UP/HOUR or DOWN/MIN to select the desired station.
Press MEMO/TIME SET button, “M” will appear on the display.
Press “1” button and then press MEMO/TIME SET button to store the station into the memory.
Repeat this step for 2-5 buttons.
When you want to store the station with No 6, when “M” blinks press ALM/MODE +5 button and then press “1” button. Press MEMO/TIME SET
button to store the station into the memory.
Repeat this step for 7-10 buttons (“2” button – for 7, “3” button – for 8, “4” button – for 9, “5” button – for 10).
To recall the station:
When the radio is on press the “1”-“5” buttons or press ALM/MODE +5 button and then press “1”-“5” buttons to recall the desired station.
Volume level
Turn the VOLUME knob to adjust the volume level.
3
Loading...
+ 4 hidden pages