
H-1512
ALARM CLOCK RADIO
РАДИОПРИЕМНИК
С БУДИЛЬНИКОМ
Руководство по эксплуатации Instruction manual

Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
1. ALARM button
2. TIME button
3. SLEEP button
4. Display
5. SNOOZE button
6. AL/OFF button
7. MIN button
8. HOUR button
9. TUNING regulator
10. AM/FM switch
11. DIMMER switch
12. AUTO ON/OFF switch
13. VOLUME regulator
Bottom of the unit: battery compartment for
1x9V battery (not included) for temporary time
storage.
1
2 3 4 5 6 7 8 9 10
11 12 13
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration,
direct sunlight, too high or low temperature or
2 3
humidity.
• If you are not going to use the unit within
a long period of time, remove the batteries to
avoid their leakage.
• Do not disassemble the unit yourselves.
Refer servicing to qualified service personnel.

Power supply
Battery operation
• Insert 1x9V battery (not included) to the
terminal inside the battery compartment. Your
set will not work normally from the battery
supply, but there is now the advantage that, in
case there is a mains current failure, your clock
will continue to work. The clock display will not
light up, the clock time will be held in the clock
memory by the battery back-up system.
This enables you to move the set from place
to place without re-setting the clock every time.
The battery back-up system is only meant to
be used from short temporary power failures.
For longer durations the battery may become
exhausted or there may be some deviation in
accuracy.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock as described in the
“AC operation” paragraph.
AС operation
• The appliance is for household use only.
• Before the first connecting of the unit
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into the power supply.
• The set is now working as an electronic
clock.
• Release all the buttons when finished the
setting.
Dimmer function
To adjust the brightness of the display, slide
the DIMMER switch to HI or LOW position.
Radio operation
Tuner operations
• Slide AUTO/ON/OFF switch to ON and
turn on the volume.
• Slide AM/FM switch to AM or FM position.
• Adjust the program using TUNING
regulator.
• Use VOLUME regulator to adjust volume
level.
Sleep to music
The radio can be set to play and to switch off
automatically after a preset time.
• Slide AUTO/ON/OFF switch to OFF or
AUTO position.
• Press SLEEP button once.
• You can have 59 minutes playing the radio
to accompany you to sleep.
• To set for a desired period of sleep, simply
press and hold SLEEP button and then press
HOUR button or MIN button to set the desired
period of the sleep function.
• If you want to turn off the radio before sleep
time has expired, press SNOOZE button once.
Alarm operation
General operations
Setting the clock
• Press and hold TIME button.
• Do not release TIME button; press HOUR
button or MIN button to set the clock display to
the correct time.
Setting the alarm
• Press and hold ALARM button.
• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.
• Release ALARM button to show the
current time.
• Slide AUTO/ON/OFF to AUTO position.