Hyundai H-1442 User Manual [ru]
H-1442
CD/MP3/USB RADIO PLAYER
CD/MP3/USB-
СТЕРЕОМАГНИТОЛА
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
1. FUNCTION switch
2. Display
3. OPEN/CLOSE button
4. Handle
5. Telescopic FM antenna
6. Phones jack
7. VOLUME regulator
8. FOLDER button
9. button
10. button
11. button
12. CD/USB button
13. PLAY MODE button
14. TUNING regulator
15. AUX input
16. USB port
1 2 3 4 5
Not indicated: Battery compartment (bottom),
power cord socket (back panel)
Important safeguards
• Attention: The Instruction manual
contains important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
2 3
6 7 8 9 10 11 12 13 14 15 16
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x UM-2/LR14 “C” size batteries.
Please observe correct battery polarities or the
set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds to the mains voltage in your home.
• Plug the corresponding end of cord into
the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when no use long time.
General operations
• To select the needed sound source set
FUNCTION switch to the corresponding
position (CD/USBAUX IN/FM/AM).
• Adjust the sound volume level by rotating
VOLUME regulator.
Headphone jack
• For private listening, insert 3.5-mm
headphone into the stereo headphone jack.
• Adjust volume to the appropriate level as
desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
Radio operations
• Set FUNCTION switch to AM or FM position.
• Rotate TUNING regulator to tune to the
desired station.
• To turn off the radio, set FUNCTION
switch to a different position.
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signal is picked up through the
built-in antenna. The set should be placed to a
position for the best reception.
CD/MP3 operations
AUX in jack
You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that device
through the amplifier of this unit.
• To connect an external audio device (eg.
MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX input
socket of this unit.
• Slide FUNCTION switch to AUX IN position.
• Turn on the external device.
Inserting discs
• Set FUNCTION switch to CD/USB
position. The display becomes active.
• Open the CD door by pressing OPEN/
CLOSE button on the CD compartment cover.
Put a CD into the CD compartment with the
label side upwards and close the CD door.
Connecting USB devices
• Set FUNCTION switch to CD/USB position.
• Insert a USB device into the USB slot.
• Press and hold CD/USB button.
• All other operations for USB are the same
as for disc playback.
• Maximum supported capacity for USB
is 32 Gbs. FAT/FAT32/NTFS file systems are
Instruction manual
supported.
Play/pause mode
• Press CD/USB button to start playback.
• Press CD/USB button to pause at any
track when playing. Press the button again to
resume.
• To stop playback, press button.
• To remove the CD from the unit open
the CD door. Always press button before
opening the CD compartment.
Skip and search mode
During playback you can use / buttons
to go to previous or next track.
• Press button once briefly for the next
track, or press repeatedly until the needed
track number is displayed.
• Press button briefly to go to the
beginnig of the current track. Press twice to go
to the previous track.
• For MP3 disc or USB device containing
folders, press and hold FOLDER button, then
press this button repeatedly to select needed
folder.
Fast backward/forward playback
Press and hold / buttons to start fast
backward or forward playback until you find the
passage to play from.
Play modes
While playing Audio CD:
• Press PLAY MODE button once for single
track repeat playing.
• Press PLAY MODE button twice for all
tracks repeat playing.
• Press PLAY MODE three times for playing
randomly.
• Press PLAY MODE four times for normal
playing.
While playing MP3:
• Press PLAY MODE button once for single
track repeat playing.
• Press PLAY MODE twice for all tracks
repeat playing.
• Press PLAY MODE three times for current
folder repeat playing.
• Press PLAY MODE four times for playing
randomly.
• Press PLAY MODE five times for normal
playing.
Program mode
Up to 32 tracks can be programmed for disc
play in any order or the same track can be
repeated several times. Before programming,
press button.
• Press PLAY MODE button. “P01“ and
“PROG“ will blink.
• Select a desired track by using /
buttons.
• Press PLAY MODE button to confirm.
• Repeat two last steps described above to
enter additional memories into the program if
necessary.
• When all the desired tracks have been
programmed, press CD/USB button to play
the disc in the order you have programmed.
• Reviewing the programm: after playing
at lest 1 programmed track, press or
button; the display will show the memorized
track numbers.
You can erase the contents of the
memory by one of the following methods:
- opening the CD door;
- pressing button twice;
- selecting RADIO source.
Good quality sound is guaranteed
only when playing licensed discs. Besides,
depending on the disc brand or the burning
speed some reding problems may occur.
Maintenance and care
• Check your batteries regularly, old or
discharged batteries should be replaced. If the
unit is not going to be used for some time or is
being run exclusively on the alternative power,
remove the batteries to avoid leakage and
damage.
4
Loading...