Hyundai H-1440 Instruction Manual
H-1440
PORTABLE STEREO RADIO
CASSETTE RECORDER WITH
CD/MP3/USB
КАССЕТНАЯ CD/MP3/USB-
СТЕРЕОМАГНИТОЛА
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
1 2 3 4 5 6 7 8 9 10 11 12 13
14
15 16 17 18 19
1. SKIP+10/FOLDER button
2. STOP button
3. button (cassette pause)
4. button (cassette stop/eject)
5. button (cassette fast forward)
6. button (cassette rewind)
7. button (cassette play)
8. button (cassette record)
9. Disc compartment door
2 3
10. USB port
11. Handle
12. VOLUME regulator
13. Headphone socket
14. PROG/REPEAT button
15. Power indicator
16. Display
17. BACK button
18. NEXT button
19. PLAY/PAUSE/USB button
Not indicated:
Back of the unit: Power cord, Telescopic
FM antenna, TUNING regulator, BAND
switch
Bottom of the unit: Battery compartment
Right panel: FUNCTION switch
Important safeguards
• Attention: The owner’s manual
contains important operating and
maintenance instructions. For your safety,
it is necessary to refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of
sufficient magnitude to constitute a risk
of electrical shock to persons is present
within this product enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel.
Do not use the unit in places where it
can be exposed to water, moisture and
dust. Make sure that pins or other foreign
objects do not get inside the unit; they
may cause malfunctions, or create safety
hazards such as electrical shock.
AC operation
• Before the first connecting of the
appliance check that voltage indicated on
the rating label corresponds the mains
voltage in your home.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or
is not used for 2 weeks or more, please
remove the batteries, to avoid damage to
the set from leakage of batteries.
• Always switch off the unit when not
in use.
• Always unplug the appliance from
power supply, when not in use long time.
Stereo headphone connection
• For private listening, insert 3.5 mm
headphone into the stereo headphone
jack (on the back side of the unit).
• Adjust volume control to the
appropriate level as desired by turning
VOLUME regulator.
• When the stereo headphone jack
is plugged, speakers will disconnect
automatically.
Radio operation
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 6 batteries (UM-2/LR14).
Please observe correct battery polarities
or the unit will not work.
• Close the battery compartment cover.
• Set FUNCTION switch to RADIO
position.
• Select your desired broadcasting
band with BAND switch.
• Rotate TUNING control regulator to
receive the desired broadcast.
• To receive FM-signal in stereo mode,
set BAND switch to FM ST position. The
FM-stereo indicator will light.
Instruction manual
• Adjust the level of sound with
VOLUME control regulator.
• To turn off the radio, set FUNCTION
switch to TAPE (OFF) position.
Antenna
• For FM reception, adjust the
telescopic antenna appropriately to obtain
the best reception on the band selected.
• The AM signal is picked up through the
built-in ferrite antenna. The set should be
placed to a position for the best reception.
CD/MP3 operation
Insertion and removal of discs
• Place a disc into the compartment
with the label-side (printed side of disc)
facing upwards. Press down in the center
part of disc until the disc “locks” onto the
center spindle.
• When the disc has been placed onto
the center spindle, gently lower the CDdoor downwards until it locks shut. The
disc is now ready to be played.
• Press STOP button to stop the disc
spinning before opening the CD-door.
• To remove a disc, follow the same
procedure as described above, except to
remove the disc instead of inserting it into
the compartment, by placing one finger at
the middle of disc (center spindle) and the
other at the edge of the disc and gently
pulling upwards.
Always hold a disc by its edges.
Avoid getting any fingerprints, smudges
or dirt onto the surface of a disc. In case
this happens, use a special CD-cleaning
cloth or cleaning kit to remove the dirt or
smudges. Please make sure to always
fold down the handle before opening the
CD door.
General operation
• Set FUNCTION switch to CD/MP3/
USB position.
• Put a disc into the CD compartment
and close the CD door.
• The LCD display will show the total
number of tracks after a few second.
Play/pause mode
• Press PLAY/PAUSE/USB button to
start play, the LCD display will show the
first track.
• Press PLAY/PAUSE/USB button to
pause at any track when playing.
• To stop the disc, press STOP button.
• For disc containing no folders, press
SKIP+10/FOLDER button to skip 10
tracks forward.
• If the disc contains folders with files,
press and hold SKIP+10/FOLDER button
to skip to the first track in the next folder.
Skip and search mode
• Press NEXT button once to skip to
the next track.
• Press BACK button once to skip back
to previous track.
• Press and hold BACK and NEXT
buttons to start fast backward or forward
playback until you find the passage to
play from.
Repeat mode
• Press PROG/REPEAT button once
for single track repeat playing.
• Press PROG/REPEAT button twice
for repeat playback of current folder (if the
disc contains folders).
4
Instruction manual
• Press PROG/REPEAT button again
for all tracks repeat playing.
• To cancel repeat play, press PROG/
REPEAT button once again.
Program mode
• Up to 20 CD tracks or 99 MP3 tracks
can be programmed for disc play in any
order, including one and the same track.
Before use, be sure to press STOP button.
• Press PROG/REPEAT button, the
memory position number will show on the
display.
• Select a desired track by using BACK
and NEXT buttons.
• Press PROG/REPEAT to confirm.
• Repeat the two last steps as
described above to enter additional
memories into the program if necessary.
• When all the desired tracks have
been programmed, press PLAY/PAUSE/
USB button to play the disc in the order
you have programmed.
• To stop the CD, press STOP button.
The program memory will be cleared
only when the CD compartment is opened
or turn off the CD or power supply.
• To turn off the CD player set
FUNCTION switch to TAPE (OFF) position.
Good quality sound is guaranteed
only when playing licensed discs.
Cassette playback
• Slide FUNCTION switch to TAPE
(OFF) position.
• Press
cassette compartment.
• Insert a cassette and push the
cassette door to close the cassette
button to open the
compartment. The full tape reel should be
on the right side.
• Press
• Press button to pause playback.
If you press it again the playback will
continue.
• Press button to stop playback,
press the button again to open the cassette
door so you can take out the tape.
• When the tape plays to the end,
playback will stop automatically.
• Fast forward and rewind: You
can run forward and rewind the tape.
Stop playback. Use button for fast
forward and button for fast backward
playback. When you have reached the
desired tape point, press button to
stop the process.
operations during playback. This may
cause damage to the tape.
Cassette recording
Insert a blank cassette with the tapeside up. Close the cassette compartment.
The unit is now ready to start recording,
which can be done from either the radio
or CD.
button to start playback.
Never use fast forward or rewind
Recording from radio
• Set FUNCTION switch to RADIO
position.
• Select a band and tune to the desired
station by rotating TUNING regulator.
• Press button and button
simultaneously to start recording.
Recording from CD
• Set FUNCTION switch to CD/MP3/
5
Loading...