Hyundai H-1439 Instruction Manual
H-1439
PORTABLE STEREO RADIO
CASSETTE RECORDER WITH
CD/MP3/USB/SD/MMC
КАССЕТНАЯ CD/MP3/USB/SD/
MMC-СТЕРЕОМАГНИТОЛА
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
Controllers
1 2 3 4 5 6 7 8 9 10 1211 13
14
15 16 17 18 19 20 21
1. VOLUME regulator
2. Handle
3. Telescopic FM-antenna
4. PAUSE button
5. STOP/EJECT button
6. F.FWD button
7. REW button
8. PLAY button
9. RECORD button
10. Disc compartment cover handle
11. BASS BOOST button
12. TUNING regulator
13. BAND switch
14. Display
2 3
15. PLAY/PAUSE button
16. PROGRAM button
17. MODE button
18.
SKIP/SEARCH and SKIP/SEARCH
button
19. CD/SD/USB button
20. FOLDER button
21. STOP button
Not indicated: USB port, SD/MMC slot (left
of top panel), Headphone socket, AUX in jack,
AC power socket, Function switch, battery
compartment (back panel)
Important safeguards
• Attention: The owner’s manual contains
important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x UM-1/“D”-size batteries. Please
observe correct battery polarities or the set will
not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Plug the corresponding end of cord into
the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when no use long time.
Headphone jack
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack.
• Adjust volume to the appropriate level as
desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
AUX line in jack
You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that device
through the amplifier of this unit.
• To connect an external audio device (eg.
MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX input
socket of this unit.
• Slide the function switch to AUX position.
• Turn on the external device.
Radio operation
• Set the function switch to RADIO position.
• Select your desired broadcasting band by
setting the band switch to the desired position.
AM of FM will be displayed.
• Rotate TUNING regulator to tune to your
desired radio station frequency. The radio
frequency will be shown on the display.
• Rotate VOLUME regulator to adjust sound
volume level.
• To turn off the radio set the function switch
to TAPE (OFF) position.
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signals are picked up through
Instruction manual
the built-in ferrite antenna. The set should be
placed to a position for the best reception.
FM/FM stereo reception
• In particular when stereo signal is weak
and much noise is received, it is preferable
to receive programs in mono mode. Set the
band switch to FM ST position to receive radio
programs in stereo mode.
• If the program is received in FM stereo,
“ST” indicator will light up.
Disc operations
Insertion and removal of discs
• Pull up the disc compartment cover. Place
a disc into the compartment with the label-side
(printed side of disc) facing upwards.
• When the disc has been placed onto the
center spindle, gently push the CD-door down
until it locks shut. The disc is now ready to be
played.
• When opening the CD-door, always
ensure the disc is not in motion (not spinning).
Always press STOP button to stop the disc
spinning first.
• To remove a disc, follow the same
procedure as described above.
Always hold a disc by its edges. Avoid
getting any fingerprints, smudges or dirt onto
the surface of a disc. In case this happens, use
a special CD-cleaning cloth or cleaning kit to
remove the dirt or smudges.
Important: Please make sure to always fold
down the handle before opening the CD door.
Compact disc operation
• Set function switch to CD position.
• Put a disc into the CD compartment and
close the CD door.
• The display will show the total number of
tracks after a few seconds.
• If there is no disc inside the compartment,
the display will show “NO”.
Play/pause mode
• Press PLAY/PAUSE button to start
playback, the display will show the current
track number and playback symbol.
• Press PLAY/PAUSE button to pause at
any track when playing, playback symbol on
the display flashes. Press this button again to
resume playback.
• To stop playback, press STOP button. The
display will show the total number of tracks on
the disc.
Skip and search mode
• Press SKIP/SEARCH button once
to skip to the next track. Press and hold this
button to search for a particular point at high
speed forward. Release the button to resume
normal playback.
• Press
skip to the beginning of the current track. Press
this button twice to skip back to the previous
track. Press and hold this button to search
for a particular point at high speed backward.
Release the button resume normal playback.
• If you use an MP3 disc containing folders,
you can select a folder. In stop mode, press
repeatedly FOLDER button. The number of
the current folder will be displayed. After you
selected a folder you can select tracks in the
current folder as described above.
SKIP/SEARCH button once to
Repeat/random mode
• Press MODE button once for single track
repeat playing.
• If you use an MP3 disc containing folders,
press this button again to repeat all tracks in
the current folders.
• Press the button again for all track repeat
playing.
• Press the button again for all track random
playing.
• To cancel repeat or random playback,
press MODE button again.
Program mode
Up to 20 tracks can be programmed for
playback in any order or the same track can be
4
Instruction manual
repeated up to 20 times.
• Before use, be sure to stop the CD by
pressing STOP button.
• Press PROGRAM button. The display will
show “P01” and “PROGRAM”. This indicates
that the set is now in memory programming
mode, at the first memory position. (If you use
an MP3 disc, press FOLDER button to select
a folder.)
• Select a desired track by using
SEARCH and
• Press PROGRAM button again to confirm.
The unit will advance to next memory position,
the display will show “P02”. Repeat two steps
described above to enter additional memories
into the program if necessary.
• After a maximum of 20 songs (or less)
have been selected as described above,
press PLAY/PAUSE button to start playing the
programmed tracks.
• To check the program you stored, after
completing programming press PROGRAM
button in CD stop mode. Then press
repeatedly
numbers of all programmed tracks.
• The program memory will be cleared when
you press STOP button twice, open the disc
compartment door or turn off the disc player or
power supply.
Good quality sound is guaranteed only
when playing licensed MP3 discs.
SKIP/SEARCH buttons.
SKIP/SEARCH button to see
SKIP/
USB/SD/MMC-card playback
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 8 Gb.
• This unit is also equipped with an SD/
MMC card socket that can accept and play
MP3 files stored on standard SD cards up to
32 Gb.
• To use USB drives/SD/MMC cards for
MP3 playback, slide the function switch to CD
position. Insert the USB drive or SD/MMC card
into the appropriate socket and repeatedly
press CD/SD/USB button until the display
shows “USB” or “CARD” (depending on which
one is being used).
• All operations with files contained in USB/
SD/MMC are the same as operations with MP3
discs.
Always switch off the unit or change
mode to another one before removing a
USB flash drive or SD/MMC card, to prevent
damage to your USB device or memory card.
Note: Although this product is fully
compatible with USB 2.0 and SD/MMC card
standard formats, a small percentage of USB
flash drives and SD/MMC cards might not be
readable, due to those device manufacturers
non-compliance with the full (official) USB and
SD cards standards.
Cassette playback
• Slide the function switch to TAPE position.
• Press STOP/EJECT button to open the
cassette compartment.
• Insert a cassette with the tape-side up
into the proper guide-rails on the inside of the
cassette door.
• Gently push the cassette door forward
(inwards) to close it.
• Press PLAY button to start the playing.
• Adjust the level of sound with VOLUME
regulator.
• Press PAUSE button to pause the playing.
• Press STOP/EJECT button to stop the
playing, press the button again to open the
cassette door and you can take out the tape.
• Press STOP/EJECT button followed by the
REWIND or F.FWD button to rewind or forward
the tape at high speed.
• When the tape plays to the end, playing
will be stopped automatically and releases the
PLAY button at the same time.
To avoid damage of tape or mechanism,
press STOP/EJECT button before each new
operation.
5
Loading...