Hyundai H-1437 Instruction Manual

H-1437

CD/MP3/USB RADIO PLAYER

CD/MP3/USB-

СТЕРЕОМАГНИТОЛА

Руководство по эксплуатации Instruction manual

Instruction manual Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.

Description

1 2 3 4 5 6 7 8 9 10 11

1. FOLDER/+10 button

2. button

3. button

4. USB port

5. Display

6. button

7. CD/USB button

8. CD door grip

9. PLAY MODE/PROGRAM button

10. Handle

11. Telescopic FM-antenna

12. TUNING regulator

13. FUNCTION switch

14. AUX IN jack

15. VOLUME regulator

16. AC IN socket

12 13 14 15 16

Not indicated:

Battery compartment (bottom)

Important safeguards

• Attention: The Instruction manual

contains important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.

• Dangerous voltage: Uninsulated

dangerous voltage that may be of sufficient

2 3

magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.

• Caution: To reduce the risk of electric

shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside

the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.

Power supply

Battery operation

• Open the battery compartment cover.

• Insert 8 x UM-2/LR14 “C” size batteries.
Please observe correct battery polarities or the
set will not work.

• Close the battery compartment cover.

AC operation

• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds to the mains voltage in your home.

• Plug the corresponding end of cord into
the AC socket on the rear of the set.

• Insert the plug into power supply.

Caution:

• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.

• Always switch off the unit when not in use.

• Always unplug the appliance from power
supply, when no use long time.

General operations

• To select the needed sound source set
FUNCTION switch to the corresponding
position (CD/AUX/FM/AM).

• Adjust the sound volume level by rotating
VOLUME regulator.

AUX in jack

You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that device
through the amplifier of this unit.

• To connect an external audio device (eg.

MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX input
socket of this unit.

• Slide FUNCTION switch to AUX position.

• Turn on the external device.

Radio operations

• Set FUNCTION switch to AM or FM position.

• Rotate TUNING regulator to tune to the

desired station.

• To turn off the radio, set FUNCTION

switch to a different position.

Antenna

• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.

• The AM signal is picked up through the
built-in antenna. The set should be placed to a
position for the best reception.

CD/MP3 operations

Playing discs

• Set FUNCTION switch to CD position. The
display becomes active.

• Open the CD door by lifting the grip on the
CD compartment cover. Put a CD into the CD
compartment with the label side upwards and
close the CD door.

Playing USB devices

• Set FUNCTION switch to CD position.

• Insert a USB device into the USB slot.

• Press and hold

• All other operations for USB are the same
as for disc playback.

• Maximum supported capacity for USB is
4 Gbs.

CD/USB button.

Instruction manual

Play/pause mode

• Press CD/USB button to start playback.

• Press
track when playing. Press the button again to
resume.

• To stop playback, press

• To remove the CD from the unit open
the CD door. Always press
opening the CD compartment.

CD/USB button to pause at any

button.

button before

Skip and search mode

During playback you can use / buttons

to go to previous or next track.

• Press
track, or press repeatedly until the needed
track number is displayed.

• Press
previous track.

• For MP3 disc or USB device containing
folders, press and hold FOLDER/+10 button,
then press this button repeatedly to select
needed folder.

button once briefly for the next

button briefly to go to the

Fast backward/forward playback

Press and hold / buttons to start fast
backward or forward playback until you find the
passage to play from.

Play modes

While playing Audio CD:

• Press PLAY MODE/PROGRAM button

once for single track repeat playing.

• Press PLAY MODE/PROGRAM button

twice for all tracks repeat playing.

• Press PLAY MODE/PROGRAM three

times for playing randomly.

• Press PLAY MODE/PROGRAM four times

for normal playing.

While playing MP3:

• Press PLAY MODE/PROGRAM button

once for single track repeat playing.

• Press PLAY MODE/PROGRAM twice for

all tracks repeat playing.

• Press PLAY MODE/PROGRAM three

times for current folder repeat playing.

• Press PLAY MODE/PROGRAM four times

for playing randomly.

• Press PLAY MODE/PROGRAM five times

for normal playing.

Program mode

Up to 32 tracks can be programmed for disc
play in any order or the same track can be
repeated several times. Before programming,
press button.

• Press PLAY MODE/PROGRAM button.

“P01“ and “PROG“ will blink.

• Select a desired track by using /

buttons.

• Press PLAY MODE/PROGRAM button to

confirm.

• Repeat two last steps described above to
enter additional memories into the program if
necessary.

• Reviewing the programm: in stop mode,
press
the memorized track numbers.

programmed, press
the disc in the order you have programmed.

memory by one of the following methods:

only when playing licensed discs. Besides,
depending on the disc brand or the burning
speed some reding problems may occur.

or button; the display will show

• When all the desired tracks have been

You can erase the contents of the

- opening the CD door;

- pressing

- selecting RADIO source.

Good quality sound is guaranteed

CD/USB button to play

button twice;

Maintenance and care

• Check your batteries regularly, old or
discharged batteries should be replaced. If the
unit is not going to be used for some time or is
being run exclusively on the alternative power,
remove the batteries to avoid leakage and
damage.

• Electronic products of this kind should
never be subjected to moisture or extreme
temperatures.

• Do not use the unit in places where it can

4