Hyundai H-1429 User Manual [ru]

H-1429

PORTABLE STEREO RADIO

CASSETTE RECORDER WITH

CD/MP3

КАССЕТНАЯ CD/MP3-

СТЕРЕОМАГНИТОЛА

Руководство по эксплуатации Instruction manual

Instruction manual Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future.

Description

1 2 3 4 5 6 7 8 9 10 11 12

14 15 16 17 18 19

1. STOP button

2. button (cassette pause)

3. button (cassette stop/eject)

button (cassette fast forward)

button (cassette rewind)

6. PLAY/PAUSE button

button (cassette play) button (cassette record)

9. Disc compartment door handle

10. Handle

11. Radio dial scale window

12. BAND switch

13. REPEAT/PROG button

2 3

14. SKIP+10/FOLDER button

15. Power light indicator

16. Display

17. BACK button

18. NEXT button

19. TUNING regulator

Not indicated:

Back of the unit: Telescopic FM antenna, Headphone socket Bottom of the unit: Battery compartment Right panel: Function switch, VOLUME

regulator

Important safeguards

• Attention: The owner’s manual contains

important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.

• Dangerous voltage: Uninsulated

dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is present within this product enclosure.

• Caution: To reduce the risk of electric

shock, do not dismantle the body. Prefer servicing to qualified service personnel. Do not use the unit in places where it can be exposed to water, moisture and dust. Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock.

Power supply

Battery operation

• Open the battery compartment cover.

• Insert 6 batteries (UM-2/LR14 type). Please observe correct battery polarities or the set will not work.

• Close the battery compartment cover.

AC operation

• Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.

• Insert the plug into power supply.

Caution:

• When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.

• Always switch off the unit when not in use.

• Always unplug the appliance from power supply, when not in use long time.

Stereo headphone connection

• For private listening, insert 3.5 mm headphone into the stereo headphone jack (on the back side of the unit).

• Adjust volume control to the appropriate level as desired by turning VOLUME regulator.

• When the stereo headphone jack is plugged, speakers will disconnect automatically.

Radio operation

• Set function switch to Radio position.

• Set BAND switch to AM or FM position.

• Rotate TUNING regulator to receive the desired station frequency.

• To receive FM-signal in stereo mode, set BAND switch to FM ST position. The FMstereo indicator will light.

• Adjust the level of sound with VOLUME regulator.

• To turn off the radio, set FUNCTION switch to TAPE (OFF) position.

Antenna

• For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.

• The AM signal is picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.

CD/MP3 operation

Insertion and removal of discs

• Place a disc into the compartment with the label-side (printed side of disc) facing upwards. Press down in the center part of disc until the disc “locks” onto the center spindle.

• When the disc has been placed onto the center spindle, gently lower the CD-door downwards until it locks shut. The disc is now ready to be played.

• Press STOP button to stop the disc

Instruction manual

spinning before opening the CD-door.

• To remove a disc, follow the same procedure as described above, except to remove the disc instead of inserting it into the compartment, by placing one finger at the middle of disc (center spindle) and the other at the edge of the disc and gently pulling upwards.

Always hold a disc by its edges. Avoid getting any fingerprints, smudges or dirt onto the surface of a disc. In case this happens, use a special CD-cleaning cloth or cleaning kit to remove the dirt or smudges. Please make sure to always fold down the handle before opening the CD door.

General operation

• Set FUNCTION switch to CD (MP3)

position.

• Put a disc into the CD compartment and

close the CD door.

• The LCD display will show the total number of tracks after a few second. If the MP3 disc contains folders, the display will show the folder number (e.g. “F01”) every five seconds.

Play/pause mode

• Press PLAY/PAUSE button to start play, the LCD display will show the first track number.

• Press PLAY/PAUSE button to pause at any track when playing, Press the button again to resume playback.

• To stop the disc, press STOP button.

• If the MP3 disc contains folders with files, select a folder by pressing and holding SKIP+10/ FOLDER button. If the disc has no folders, press this button to skip 10 tracks forward.

Skip and search mode

• Press NEXT button once to skip to the next track.

• Press BACK button once to skip back to previous track.

• Press and hold BACK and NEXT buttons to start fast backward or forward playback until you find the passage to play from.

Repeat mode

• Press REPEAT/PROG button once for

single track repeat playing.

• Press REPEAT/PROG button again for all

tracks repeat playing.

• Press REPEAT/PROG button again for current folder tracks repeat playing (onlt if the MP3 disc contains folders).

• To cancel repeat play, press REPEAT/ PROG button once again.

Program mode

• Up to 20 tracks (for CD) or 99 tracks (for MP3) can be programmed for disc play in any order. Before use, be sure to press STOP button.

• Press REPEAT/PROG button, the memory position number will show on the display.

• Select a desired track by using BACK and NEXT buttons.

• Press REPEAT/PROG button to confirm.

• Repeat the two last steps as described above to enter additional memories into the program if necessary.

• When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed.

• To stop the CD, press STOP button.

The program memory will be cleared only when the CD compartment is opened or turn off the CD or power supply.

• To turn off the CD player set FUNCTION

switch to TAPE (OFF) position.

Good quality sound is guaranteed only when playing licensed discs.

Cassette playback

• Slide FUNCTION switch to TAPE (OFF)

position.

• Press button to open the cassette

compartment.

• Insert a cassette and push the cassette door to close the cassette compartment. The full tape reel should be on the right side.

• Press

button to start playback.

+ 7 hidden pages