Hyundai H-1422 User Manual [ru]

H-1422
PORTABLE RADIO CASSETTE
RECORDER WITH CD/MP3
КАССЕТНАЯ CD/MP3-
СТЕРЕОМАГНИТОЛА
Руководство по эксплуатации Instruction manual
Instruction manual Instruction manual
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future.
Description
1. VOLUME knob
2. FUNCTION switch
3. DBBS button
4. CD compartment door
5. button (cassette stop/eject)
6.
button (cassette rewind)
7.
button (cassette fast forward)
8.
button (cassette play)
9. Handle
10. BAND switch
11. Telescopic FM antenna
12. button (cassette pause)
13. LCD display
14. PROG button
15. Left speaker
16. TUNING knob
17. button (cassette record)
18. button
19. (FOLDER)STOP button
20. Right speaker
21. Cassette compartment
22. MODE button
button
23.
24. button
1 2 3 4 5 6 7 8 9 10 11
12
13 14
15
21 22 23 24
Not indicated:
Phones output (left panel) AC power socket (back panel) Battery compartment (back panel)
16 17
18
19
20
Important safeguards
Attention: The owner’s manual contains
important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient
2 3
magnitude to constitute a risk of electrical shock to persons is present within this product enclosure.
Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer servicing to qualified service personnel. Do not use the unit in places where it can be exposed to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock.
reception on the band selected.
• The AM signal is picked up through the built-in ferrite antenna. The unit should be placed to a position for the best reception.
Power supply
Battery operation
Open the battery compartment cover. Insert 8 UM-2/R14/C type batteries. Please observe correct battery polarities or the set will not work. Close the battery compartment cover. Use only batteries of the same type for the unit. Do not use old batteries together with new ones.
AC operation
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home. Plug the corresponding end of cord into the power cord socket on the rear of the set. Insert the plug into power supply.
Caution:
• When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the unit from power supply, when no use long time.
Radio operation
• Set FUNCTION switch to FM or AM position.
• Rotate TUNING knob to receive the desired station.
• Adjust the level of sound with VOLUME knob.
• To turn off the radio, set the FUNCTION switch to TAPE (OFF) position.
Headphone jack
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack.
• Adjust volume control to the appropriate
level as desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
Compact disc operations
• Set FUNCTION switch to CD/MP3
position.
• Open the CD door by pressing “OPEN/ CLOSE” inscription on the CD compartment door. Put a CD into the CD compartment with the label side upwards and close the CD door.
Play/pause mode
• Press PLAY/PAUSE button to start play.
• Press PLAY/PAUSE button to pause at any track when playing. Press this button again to resume playback.
• To stop the disc, press (FOLDER) STOP button.
• To remove the disc from the unit open the CD door.
• Always press (FOLDER)STOP button before opening the CD compartment.
• To turn off the CD player, set FUNCTION switch to TAPE (OFF) position.
• In stop mode, you can press (FOLDER) STOP button to select your desired album followed by PLAY/PAUSE button (for MP3 disc with multiple albums only).
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
Skip and search mode
During playback you can use or
buttons to go to a previous or next track.
Instruction manual
• If you have selected a track number in the stop or pause position, press PLAY/PAUSE button to start playback.
• Press track, or press repeatedly until the desired track number appears in the display.
• Press the beginning of a current track.
• Press previous track.
button once briefly for the next
button once briefly to return to
button twice briefly for the
Fast backward/forward playback
Press and hold or buttons to start fast backward or forward playback until you find the passage to play from.
Play mode
While playing Audio CD:
• Press MODE button once for single track
repeat playing.
• Press MODE button twice for all tracks
repeat playing.
• Press MODE button three times for playing
randomly.
• Press MODE button four times for normal
playing.
While playing MP3 MODE:
• Press MODE buttononce for single track
repeat playing.
• Press MODE button twice for track inside
the album repeat playing.
• Press MODE button three times for all
tracks repeat playing.
• Press MODE button four times for playing
randomly.
• Press MODE button five times for normal
playing
Program mode
Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before programming, press (FOLDER)STOP button.
• Press PROG button.
• Select a desired track by using
buttons.
• Press PROG button to confirm selection
or
and store the track.
• Repeat previous 2 steps to enter additional
tracks into the program if necessary.
• When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed.
• After playing at least one programmed track, press show your stored track numbers.
You can erase the contents of the
memory by one of the following methods:
- opening the CD door;
- selecting FM or AM radio band;
- pressing PLAY/PAUSE button and then STOP/FOLDER button;
- in the off position.
Good quality sound is guaranteed only
when playing licensed CD-R/CD-RW discs.
or button, the display will
Cassette playback
• Slide FUNCTION switch to TAPE (OFF) position.
• Press compartment.
• Insert a cassette and push the cassette door to close the cassette compartment. The full tape reel should be on the right side.
• Press
• Press press it again the playback will continue.
• Press the button again to open the cassette door so you can take out the tape.
• When the tape plays to the end, playback will stop automatically.
• Fast forward and rewind: You can run forward and rewind the tape. Stop playback. Use for fast backward playback. When you have reached the desired tape point, press button to stop the process.
Never use fast forward or rewind operations during playback. This may cause damage to the tape.
button to open the cassette
button to start playback.
button to pause playback. If you
button to stop playback, press
button for fast forward and button
4
Loading...
+ 9 hidden pages