Hyundai G90TR Users Manual

NEXT

User’s Guide

Type No. L19T0D070

Model. G90TR

Dual Function Touch Monitor

U.S.A.

U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not install

ed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

Reori

ent or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

DECLARATION OF CONFORMITY

Kind of equipment : LCD TOUCH MONITOR

Type-Designation : L19T0D070

Safety : IEC60950-1:2002
EMC : EN 55022/1998+A1:2000+A2:2003

EN 55024 :1998+A1:2001+A2:2003
EN61000-3-2:2000+A2:2005
EN61000-3-3:1995+A1:2001+A2:2005

TUV SUD Product Service GmbH

Ridlerstrasse 65 - 80339 Munchen - Germany

WE HYUNDAI IT CORP.

Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)

following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.

KOREA / May 6, 2008

(Place and date of issue) (Name and signature of

Jong Won, Choi Ho Suk, Chon

authorized person)

G90TR
Dual Function Touch Monitor

Contents

1. Introduction ...........................................1/24

2. Safety Information .................................1/24

3. Installing the monitor ............................4/24

3-1. Packing List ..........................................4/24

3-2. Selecting a suitable location ...............5/24

3-3. Rear View & Signal Input Jacks .........6/24

3-4. Connecting the monitor .......................6/24

3-5. Setting the refresh rate ........................9/24

Preset Timing Table ...........................10/24

3-6. Way to Install driver for touch

monitor ................................................11/24

3-7. User’s Environment .............................12/24

4. Adjusting the picture .......................14/24

4-1. Using the On Screen Display ........15/24

4-2. Direct access buttons ....................15/24

4-3. OSD Adjustments ...........................16/24

5. Display power management ........... 20/24

Reducing power consumption ............20/24

6. Troubleshooting ...............................21/24

7. Specifications ...................................24/24

G90TR
Dual Function Touch Monitor

1. Introduction

2. Safety Information

1/24

This manual contains instructions for installing and operating
HYUNDAI IT G90TR.

HYUNDAI IT G90TR. is a highly ergonomic color display unit.

• 19" viewable SXGA LCD

• High quality screen re-scaling capability

• VESA DPMS (Display Power Management Signaling)

• VESA DDC1/2B compatibility

• Advanced digital On-Screen-Display controls

• Fast and accurate auto adjustment

• Most advanced image scaling

• Supporting VESA Flat Panel Monitor Physical Mounting Interface

• Digital Signal Input by DVI-1.0 Compatibility

• 5-wrie Resistive Touch monitor (G90TR)

This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind

the following:

Do not place anything wet on the monitor or the power

cord. Never cover the ventilation openings with any

material and never touch them with metallic or
inflammable materials.

G90TR
Dual Function Touch Monitor

2/24

Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~35°C
Humidity : 30~80RH

Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.

Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.

Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.

Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.

G90TR
Dual Function Touch Monitor

Cleaning and Maintenance

• To avoid risk of electric shock, do not disassemble the display unit cabinet. The
unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.

• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.

• Do not wipe the screen with a cloth or sponge that could scratch the surface.

• To clean your antistatic screen, use water and a special microfiber screen

cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.

• If the instructions above do not help in removing stains, contact an authorized
service agent.

• The main plug for the power cord shall be ready for being used at any time.

• An apparatus with Class I construction shall be connected to a main socket

outlet with a protective earthing connection.

3/24

G90TR
Dual Function Touch Monitor

4/24

The following items should be found in the packaging.

Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.

Other power cord except the cord packed in the product or longer than 3m
may affect EMC of the product in operating condition.

3. Installing the
monitor

3-1. Packing List

!

UK

America/Canada

Japan

Australia

Korea

Europe

South Africa

Power Cord

Signal Cable

Audio Cable

DVI-D Cable

USB Cable

Manual CD & Touch

Install CD

AC/DC Power

Adapter

G90TR
Dual Function Touch Monitor

5/24

3-2. Selecting a suitable

location

3-3 Rear View & Signal

input Jacks

• Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at

least 10cm on each side for ventilation.

• Place the monitor in a position where no light shines directly onto or is reflected on the screen.

• To reduce eye strain, avoid installing the display unit against a bright background such as a
window.

• Position the monitor so that the top of the screen is no higher than eye level.

•

Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm)

USB : Connect to USB of PC

Power In (12V DC ):Connectto AC/DC Adaptor

Audio In : Connect to the jack, "Audio Out " of PC .

Output PC Sound.

Audio Out : Connect to Head Phone.

D-Sub : Connect to the jack, "D-Sub" (Analog)

of PC.

DVI : Connect to the jack, "DVI" (Digital) of PC.

Speaker : Output PC sound.

USB DVI A IN 12V DCA OUTD-SUB