How it Works
Hyundai
Loading...
D55ES
User Manual
34 pgs1.09 Mb0

Hyundai D46ES, D55ES User Manual

User’s Guide
MODELS : D46ES** , D55ES**
Contents
Safety Information ............................................................................................................. 3
Be sure to understand ........................................................................................................ 5
Check the accessories list ................................................................................................... 6
Proper location for product installation ............................................................................. 6
Title and function of each part ........................................................................................... 7
Diagnosis ......................................................................................................................... 29
* REMOTE CONTROL / RS232C COMMAND SPEC
DIGITAL SIGNAGE
3
DIGITAL SIGNAGE
Safety Information
This product is designed to ensure user's safety. Avoid the following items to prevent serious electric shock and other dangers.
- Do not cover the ventilation holes with anything or insert anything into the ventilation holes.
- Do not place product on a location where damage can be caused by oil, smoke and etc.
- The product is not suitable for use at visual display workplaces according to §2 of the German Ordinance for Work with Visual Display Units.
- An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection.
- Make sure that the power cord and other cables are properly plugged in.
- When not connecting proper power plug into power outlet, otherwise this may cause fire by electric shock.
- Do not touch the power cord with wet hands, otherwise it may cause electric shock.
- Overloaded AC outlets and extension cables are as dangerous as the power cord being damaged. Call service engineer for replacement since it may cause electric shock or fire.
- Do not use multiple devices in a single power outlet, otherwise this may cause overheating or fire.
- The main plug of the power supply cord shall remain readily operable. The disconnect device shall remain readily operable.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Do not use or place sharp objects near the LCD surface because this can cause in itself damage to the product.
- When cleaning the LCD screen / surface, do not use strong chemicals such as ethyl, ethyl or a Isopropyl. This can seriously damage the special coatings on the screen. Use the soft cloths only adding a little water.
- When cleaning the product, make sure to remove the power cord and wipe with a dry cloth.
- Keep batteries for the remote control being out of children's sight.
- Batteries should be inserted with correct polarity (+,-).
- Use only new batteries. Do not use new battery and used battery at the same time.
- When the product keeps un-using for a long time, make sure to unplug the power cord.
- In case of damage or breakage, do not attempt to self repair.
4
DIGITAL SIGNAGE
Please contact the local service engineer.
- Ensure that more than 4 people at least should work together when moving, lifting or installing.
- When a cart is used, use it with cautious when moving the cart/apparatus combination to avoid injury from tip-over.
WARNING
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USE BATTERIES ACCORDING TO THE INSTRUCTIONS
5
DIGITAL SIGNAGE
Image quality of the product
CAUSE
Due to the nature of LCD's property, afterimage can occur. Afterimage appears when identical frames / images are displayed continuously. If displayed for prolonged periods of time this can become permanent.
PREVENTION When you display a freeze frame for a long time, lower the brightness and contrast (Brightness, 70/ Contrast,
80). Also it can be prevented by using moving frame.
COUNTERMEASURES Temporary afterimage can be alleviated by displaying white or moving frame about 10 hours. (But, permanent afterimage cannot be disappeared according to the property of LCD) This method is used to remove temporary afterimage that may occur after displaying a still frame for a certain time. It can take several minutes or hours to remove afterimage according to the severity. In the case that your cannot avoid displaying identical still image continuously, you can prevent it by displaying moving image for 2 or 3 minutes in every hour. As the brightness of still image and time of display are the cause of afterimage, you are recommended to lower the brightness in that case.
!
Above problem shall not be covered by warranty.
Be sure to understand
6
DIGITAL SIGNAGE
Check the accessories list
Please check the following components provided with the product after you open the box.
Remote control User's manual
!
Please check the following components provided with the product after you open the box and contact the dealer if any missing. The contents may vary depending on models and sometimes the contents may be attached on the product.
Proper location and recommended installation
- Place product on a stable surface.
- Product is installed at where the place is clean and product does not sink under water even though heavy raining. It must be installed at where water does not flood at least over the bottom of the product.
- Locate the product at least 1 m away from the electric appliance or heating product.
- Keep the product out of direct ray of light and locate screen not to be reflected by the sunlight.
- Install product in a well ventilated location. Ensure that there is a clearance of more than 100 cm from the wall.
- On LCD panel direction basis, install product avoiding western and eastern direction.
- Make sure anchors to be tightened firmly before installation.
!
For further details such a base construction and anchor, refer to appendix guide on installation.
Please take extra care during installation, It can cause damage if the unit is handled badly or knocked.
7
DIGITAL SIGNAGE
Title and function of each part
Control panel
1
Remote control receiving sensor.
2
Power display LED red-stand by/ Green-working.
3~ 0
OSD button.
3
Power button : to turn the power on or off.
4
Input selection button : to select other connected device. (Option)
5
Menu button : to display menu or exit from the menu.
6
Select button.
7
To move down in OSD menu.
8
To move up in OSD menu.
9
To move left and control the volume down in OSD menu.
0
To move right and control the volume up OSD menu.
• Rear View
POWER
SOURCE MENU
SELECT
VOL
3 4 5 6 7 8 9
0
POWER
SOURCE MENU
SELECT
VOL
1 2
• Front View
8
DIGITAL SIGNAGE
Terminal panel
1 4
UPGRADE Port :
* this port is used for upgrade service and not
for general users.
2
IR-IN/OUT
3
RS232C-IN/OUT
5
HDMI IN
6
DVI IN
7
DVI OUT
8
PC D-SUB IN
9
PC AUDIO-IN
0
AUDIO LINE-OUT
!
AC-IN
• Rear View
1 2 3 4 5 6 7 8 9 0 !
9
DIGITAL SIGNAGE
Remote control
1
To turn the power on or off.
2
Move up in OSD menu.
3
To move left or control the volume down in OSD menu.
4
To move right or control the volume up in OSD menu.
5
To move down in OSD menu.
6
[ENTER] Select in OSD menu.
7
Display the OSD menu.
8
Close the OSD menu.
9
Display the menu of signal source and choose it.
0
Temporary sound switch off.
[TIP] If it doesn’t need to control display by a remote-controller, press button of remote-controller in order following.
MENU → SOURCE → EXIT → ▼ → ENTER(
↵)
* Press button once again in order above so that original condition is returned.
10
DIGITAL SIGNAGE
Support timing for HDMI / DVI
NO Resolution
Horizontal frequency
(KHz)
Vertical frequency
(Hz)
1
480p 640 x 480p 60
2
576p 720 x 576p 50
3
720p 1280 x 720p 50 / 60
4
1080i 1920 x 1080i 50 / 60
5
640 x 480 31.47 59.94
6
800 x 600 37.88 60.32
7
1024 x 768 48.36 60
8
1360 x 768 47.70 60
9
1280 x 1024 63.98 60
10
1920 x 1080 67.50 60
11
1080p 1920 x 1080p 60
11
DIGITAL SIGNAGE
Support timing for PC
NO Resolution
Horizontal frequency
(KHz)
Vertical frequency
(Hz)
1
640 x 480 31.47 59.94
2
800 x 600 37.88 60.32
3
1024 x 768 48.36 60.32
4
1360 x 768 47.71 60.00
5
1280 x 1024 63.98 60.00
6
1920 x 1080 67.50 60.00
Loading...
+ 23 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use