Hyundai AN241HGAN Users Manual

Deleting an address book

Press the

Yes

button.

1.Press the

Press the

3. Press the

SETUP

key.

My Places

Address Book

button.

4. Press the desired address book (user) but-

ton.

Press the

5.Press the

Delete all

Yes

button.

NAVIGATION SYSTEM

button.

NAVIGATION SYSTEM

3-47

PART 3 NAVIGATION SYSTEM

Registering home address

1.Press the

Press the

3.Press the

4.Press the

SETUP

key.

My Places

Home Address

button.

INFORMATION

Press the

ister the current position as Home.

Search the address.

The process is the same method as search-

ing an address.

6.Press the

Store current position

button to reg-

[Searching an Address], page 3-13.

Done

button to complete.

Deleting home address

1.Press the

Press the

3. Press the

4.Press the

SETUP

key.

My Places

Home Address

Delete

button.

3-48 NAVIGATION SYSTEM

Registering favorite place

Press the

Yes

button.

1. Press the

Press the

3.Press the

SETUP

key.

My Places

Favorite Places

button.

4. Press the number of the Favorite Place to

Press the

button.

INFORMATION

Press the

ister the current position as a Favorite place.

Search the address.

The process is the same as the method for

searching an address.

Store current position

button to reg-

[Searching an Address], page 3-13.

NAVIGATION SYSTEM

3-49

PART 3 NAVIGATION SYSTEM

Deleting favorite place

Press the

Done

button to complete.

1. Press the

Press the

3.Press the

Select the desired favorite place button to

SETUP

key.

My places

Favorite Places

button.

delete.

Press the

6.Press the

Delete

Yes

button.

3-50 NAVIGATION SYSTEM

System information and update

1.Press the

Press the main button.

Press the

SETUP

key.

System Info

button.

Voice guidance volume setting

1.Press the

Press the

SETUP

key.

Voice Setup

button.

Voice guidance volume control

●

Set the desired volume level by using the

◀

or ▶ buttons and press the

Listen

button to verify the volume level.

Voice Command

1. Press the key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Voice Guidance Louder"

"Voice Guidance Softer"

NAVIGATION SYSTEM

● 

Press the

Mute

button when voice guid-

ance is unnecessary.

Voice guidance can be turned back on by

pressing the

ing the

◀

or ▶ buttons or press-

Mute

button.

Voice Command

1. Press the key on the steering Wheel

remote controller.

2. After the beep sound, say a command.

"Voice Guidance On"

"Voice Guidance Of"

NAVIGATION SYSTEM

3-51

PART 3 NAVIGATION SYSTEM

Adaptive volume control ON/OFF

●

Press the desired setting button.

INFORMATION

Adaptive Volume Control

If the speed of the vehicle is over approxi-

mately 60 mi/h (100km/h), the volume level

can be increased one level higher than the

current level. If the speed of the vehicle falls

under 60 mi/h (100km/h), the volume level

will return to its original level.

3-52 NAVIGATION SYSTEM

Traffic Setup

1. Press the

Press the

Select the desired changes and press the

Done

SETUP

Traffic Setup

button.

key.

button.

INFORMATION

● 

Display Traffic and Flow data on Map : select

whether to display traffic information on

the map.

● 

Voice Prompt for traffic and flow warning :

select whether to provide voice guidance in

front of Traf fic Informatio n. (On route -

3mile)

● 

Display Detour pop-up message : select

whether to display Detour pop up in front

of Traffic Information. (On route - 3mile)

Traffic Information

(a) Viewing Traffic Information

When the Traffic option is active, press the

button on the Map screen.

Traffic Flow INFORMATION

Normal, Free Flowing (46 mph ~)

Moderate Congestion (26 ~ 45 mph)

Heavy Traffic, Stop and Go (0 ~ 25 mph)

Road Construction

Accident

Congestion/Slow Traffic

Incient

Hazardous Road Conditions

Travel Information

INFORMATION

● 

Traffic information will be shown on the

map up until the scale is ~4mile.

● 

Displays the traffic information around vehi-

cle for up to a radius of 50 miles.

(Information exceeding 50 miles will not be

displayed)

● 

Th e above list ca n be sorted by either

Distance (Default) or Category.

The user can check points of accidents and

traffic details.

(b) Changing Traffic Category

After selecting the desired menu among

the six menus, press the

Done

button to

save. Once returning to the previous List

screen, the corresponding Category list will

be shown and maintained until Category

information is changed.

NAVIGATION SYSTEM

Select the desired

List

button.

Press the

Advanced

button at No. 2.

NAVIGATION SYSTEM

3-53

PART 3 NAVIGATION SYSTEM

Help

1.Press the

Press the

3.Press the

SETUP

key.

Help

button.

Navigation

button.

4.Press the desired Help menu button.

The full content of the help section can be

viewed by using the top-down scroll but-

tons.

3-54 NAVIGATION SYSTEM

PART 4

XM DATA

XM Data mode ……………………… 4-2

Entering XM Data mode ……………… 4-2

XM Data mode screen and functions

Traffic data Service Information …… 4-2

Stock Data Service Information

Sport Data Service Information

Weather data Service Information…… 4-4

… 4-2

……… 4-3

XM DATA

4-1

PART 4 XM DATA

XM Data mode

The XM Data Service is a paid membership

satellite radio service which provides users

with traffic, stock, sports, and weather infor-

mation. However, weather information is not

supported for vehicles purchased in Canada.

For information on registration or related con-

tent, please visit the XM radio website (www.

xmradio.com).

4-2 XM DATA

Entering XM Data mode

1. From the current location map screen with-

in the nav igation, press the

button.

The main XM data service screen will be dis-

played. Within the main screen, there are

four categories of Traffic, Stocks, Sports and

Weather.

XM DATA

XM Data mode screen and functions

Traffic data Service Information

• Automatic route recalculation (guidance)

according to changes in traffic conditions.

• Provides short-cuts for initially searched

routes.

• Displays increased detour distance and esti-

mated driving times.

• Displays icons by each traffic situation on

the map.

Route calculation by incorporating actual

road traffic conditions

● 

Incorporation of traffic information to route

calculations is a user option which can be

turned on or off by the user.

Displays Road Traffic situations

● 

RTM (Road Traffic Message ) is a feature

which displays symbols of icons for each

type of road traffic condition, such as loca-

tions under construction, accidents, basic

weather, and others on map locations based

on Traffic information provided by XM.

Avoidance of locations where traffic situa-

tions have occurred.

● 

If a traffic situation occurs somewhere along

the route, the route is recalculated to avoid

such locations and an avoidance recalcula-

tion popup will be displayed.

Displays Traffic Event List

● 

A list providing details on accidents and an

icon which will display the accident location

are displayed. The user can view details by

pressing on the list or move the map to the

accident location by pressing on the acci-

dent icons.

Stock Data Service Information

XM Stock data Service is a service which pro-

vides real-time updated information on the

NYSE, NASDAQ, and AMEX (approximately

11,000 symbols).

Press the

Stocks

button to displ ay the

Sea rch sc reen wher e symbo ls ca n be

searched. Input the name of the symbol

you wish to search and press the

List

button to show search results.

For symbols which you are interested in,

press the <Favorites> icon to save the sym-

bol as a part of <My Favorite>. Saved sym-

bols can be viewed from the

My Favorites

button on the Stock Main screen.

Sport Data Service Information

This service provides real-time updated infor-

mation on scores and schedules for major

sports, such as NFL, NBA, NCA A Footba ll,

NCAA Basketball, NHL, MLB, NASCAR and

more.

Press the desired

Sports

button to view

related sports information.

XM DATA

4-3

PART 4 XM DATA

2.My teams

You can save teams which you are interested

in as part of <My teams> to easily view related

scores and schedules.

Within the <My teams> screen, teams can be

added by pre ssing th e

Add

button or

deleted by pressing the button.

Weather data Service Information

The Weather Service is a service which pro-

vides weather information updated every 5

minutes for your region.

The Weather Service includes Tabular Weather,

Graphical Weather, Warnings and Advisories

Services.

Tabular Weather Service

● 

Provides current weather information and

weather information for the coming next

three days for your region.

To change the region, press the

Other City

button and select the desired region.

Graphical Weather Service (

● 

This service provides weather information,

Map

button)

such as Cloud, Fog, Rain, Snow, and Road

Conditions on the Navigation map as sym-

bols. Details can be viewed on specific

regions by using the zoom in and zoom out

features.

Warning and Advisories Service

● 

This service provides weather warnings and

advisories, such as Tornado, Storm, Flood

etc. as symbols on the Navigation map.

Details can be viewed on specific regions by

using the zoom in and zoom out features.

4-4 XM DATA

PART 5

VOICE COMMAND SYSTEM

Operating voice command ………… 5-2

Condition for voice command system …… 5-2

Basic operation for voice

command control

Voice command Help

……………………… 5-2

…………………… 5-3

Setting up the voice command system 5-4

Setting voice Prompt ON/OFF ………… 5-4

Speaker adaptation

…………………… 5-4

Voice command list ………………… 5-6

Command list of Audio system ………… 5-6

FM/AM Radio

XM Radio

…………………………………… 5-8

MP3

…………………………………… 5-9

USB MP3

USB IMAGE

iPod

…………………………………… 5-11

Others

………………………… 5-6

…………………………… 5-7

……………………………… 5-10

…………………………… 5-10

………………………………… 5-11

Command list of Navigation system

Map

…………………………………… 5-12

Destination

Route

Others

Searching destination by voice command

Find address

Find nearest POI

Find nearest <POI name>

Destination POI by phone number

Find emergency <Category>

Destination by address book

Previous destination

Previous start point

Go home

Destination by memory

point <1 to 5>

…………………………… 5-14

………………………………… 5-15

………………………………… 5-16

………………………… 5-19

……………………… 5-20

………………… 5-24

………………… 5-25

……………………………… 5-25

……………………… 5-25

……… 5-12

…………… 5-21

… 5-22

……… 5-23

………… 5-24

5-19

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-1

PART 5 VOICE COMMAND SYSTEM

Operating voice command

Condition for voice command system

Most of the functions within the Audio and

Navigation system can be operated by voice.

Please follow the following instructions for

optimal voice recognition performance.

● 

Close all windows and the sunroof. The per-

formance of the voice recognition can be

improved if the environment of the car inte-

rior is quiet.

● 

Press the voice recognition button and say

the desired voice command after the sound

of the beep.

● 

The microphone is positioned above the

driver so that voice commands can be spo-

ken while maintaining a proper posture.

● 

Pronounce the voice commands naturally

and clearly as if in a normal conversation.

5-2 VOICE COMMAND SYSTEM

Basic operation for voice command control

1. Press the key on the steering wheel

remote controller. A voice command win-

dow will be displayed on the lower side of

the sc reen fo llowe d by a "Comm and

please" system voice comment.

INFORMATION

Th e Syst em voi ce comm ent "C omma nd

Please" will not be provided when the Voice

prompt is turned OFF.

2. Once the icon changes into the icon

on the pop-up screen with a beep sound,

say the desired voice command (ex : previ-

ous destination)

[Voice command list], page 5-6.

[Searching destination by voice com-

mand], page 5-19.

If the exact command is not known, use the

"Help" command to view the commands list

in detail.

INFORMATION

Press the key short ly to input a voice

command from among the system voice com-

ments. The system voice instruction comment

will immediately terminate. When the

icon changes into the icon with a beep

sound, input the desired voice command.

3. The inputted command is fed back to the

screen and voice system. If the command

was not recognized properly, say "Back".

INFORMATION

●

The commands which can currently be

inputted are displayed on the screen in yel-

low.

● 

To terminate the voice recognition system,

either say "cancel" or press the

0.8 second.

● 

Be aware that during the operation of the

voice recognition system, pressing the hard

keys or the screen will terminate the voice

recognition system.

for over

Voice command Help

1. Press the key on the steering wheel

remote controller. A voice command win-

dow will be displayed on the lower side of

the sc reen fo llowe d by a "Comm and

please" system voice comment.

INFORMATION

Th e Syst em voi ce comm ent "C omma nd

Please" will not be provided when the Voice

prompt is turned OFF.

2. Once the icon changes into the

icon on the pop-up screen with a beep

sound, say "Help". If the proper Help menu

is already known, voice commands, such as

"destination help" can be inputted directly.

INFORMATION

The "help" command can be used even while

voice recognition dialogue is operating. At

such time, help instructions appropriate to

the state of the dialogue will be provided.

VOICE COMMAND SYSTEM

3. Say the name of the desired menu.

(ex : "Destination help")

4. Say the desired voice command.

VOICE COMMAND SYSTEM 5-3

PART 5 VOICE COMMAND SYSTEM

Setting up the voice command system

Setting voice Prompt ON/OFF

● 

Voice prompt ON : all system prompts are

provided.

●

Voice pro mpt OFF : most of the system

prompts are not provided.

1. Press the key on the steering wheel

remote controller.

2. Once the icon changes into the

icon on the pop-up screen with a beep

sound, say "Voice setup." The "voice prompt

on" or "voice prompt off " can be directly

in pu tted if the curre nt sta te is already

known.

3. Once the icon changes into the icon on the

po p-up sc reen wit h a beep sound, say

"Voice Prompt on".

INFORMATION

In the Voice Set up Hel p screen, the com-

mands possible for input within the current

mode are displayed. For example, if the Voice

prompt is currently in Off state, then the com-

mand Voice prompt ON will be displayed on

the screen.

Speaker adaptation

1. Press the key on the steering wheel

remote controller.

2. Once the icon changes into the icon

on the pop-up screen with a beep sound,

say "Voice setup." Or the "Speaker adapta-

tion" command can be directly inputted.

3. Once the icon changes into the

icon on the pop-up screen with a beep

sound, say "Speaker adaptation".

5-4 VOICE COMMAND SYSTEM

●

Reset Speaker adaptation: Returns to previ-

ous state prior to applying Speaker adapta-

tion.

1. Press the key on the steering wheel

remote controller.

4. Once the icon changes into the

icon on the pop-up screen with a beep

sound, say "Yes".

5. L isten an d re pe at the 20 comm an ds

(approximate) as instructed by the device.

2. Once the icon changes into the

icon on the pop-up screen with a beep

sound, say "Reset Speaker adaptation".

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-5

PART 5 VOICE COMMAND SYSTEM

Voice command list

The voice commands for this system are divid-

ed into Global commands and Local com-

mands.

●

Global command () : Commands which

operate in all operating modes.

●

Local command () : Commands which

op era te only wh en the corres pon din g

mode is opera ting or when th e mode

screen to the corresponding mode is dis-

played.

Command list of Audio system

FM/AM Radio

Command Operation

Radio

●

(Radio) AM

●

(Radio) FM

●

FM <1 or 2>

●

AM frequency <530 to 1710>

●

(ex. AM frequency 1310)

FM frequency <87.5 to 107.9>

●

(ex. FM frequency 99.1)

AM Preset <1 to 6> Plays the desired AM band preset frequency.

●

FM <1 or 2> Preset <1 to 6>

●

Preset <1 to 6>

○

Seek Up

○

Plays the most recent frequency for the most recently operated band.

Plays the most recent frequency for the corresponding band.

Plays the most recent frequency for the corresponding band. In the case of FM, the most recent frequency within the most recently played FM1 or FM2 band is played.

Plays the most recent frequency for the corresponding band.

Plays the desired AM band frequency.

Plays the desired FM band frequency.

Plays the desired preset frequency of FM1 or FM2 band.

Plays the desired preset frequency for the current band.

Searches and plays the next frequency of the current band.

5-6 VOICE COMMAND SYSTEM

Command Operation

Seek Down

○

Preset Up Plays the next preset frequency of the current band.

○

Preset Down

○

Scan Scans all frequencies within the current band.

○

Preset Scan Scans the 6 preset frequencies of the current band.

○

Auto Store / Auto Preset

○

Searches and plays the previous frequency of the current band.

Plays the previous preset frequency of the current.

Searches all frequencies within the current band and stores the 6 frequencies with the most superior reception as preset buttons.

XM Radio

Command Operation

● XM

XM <1 or 2 or 3>

●

XM Channel <0 to 255> Plays the desired XM band channel.

●

XM <1 or 2 or 3> Preset <1 to 6>

●

Channel < 0 to 255 > Plays the desired channel of the current band.

○

Preset <1 to 6> Plays the desired preset channel of the current band.

○

Channel Up Plays the next channel of the current band.

○

Channel Down Plays the previous channel of the current band.

○

Plays the last channel within the last band from XM1, XM2, and XM3.

Plays the most recent channel for the corresponding Band.

Plays the desired preset channel for XM1 or XM2 or XM3 band.

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-7

PART 5 VOICE COMMAND SYSTEM

Command Operation

Preset Up

○

Preset Down Plays the previous preset channel of the current band.

○

Scan Scans all channels within the current band.

○

Preset Scan Scans all preset channels within the current band.

○

Command Operation

DISC Plays the DISC already inserted in the CD Player.

●

CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played.

●

CD track <1 to 665>

●

Track <1 to 665> Plays the desired track.

○

Next track Plays the next track.

○

Previous track Plays the previous track.

○

Scan Scans all tracks on the CD DISC.

○

Repeat track Repeats the current playing track.

○

Random Plays the tracks of the CD DISC in random order.

○

Normal play

○

Plays the next preset channel of the current band.

If the DISC inserted in the CD Player is a CD, then CD Mode will start and plays the desired track.

Turns off the Scan, Repeat, and Random functions.

5-8 VOICE COMMAND SYSTEM

MP3

Command Operation

DISC Plays the DISC already inserted into the CD Player.

●

MP3

●

Next file Plays the next file.

○

Previous file Plays the previous file.

○

Next folder Plays the first file in the next folder.

○

Previous folder Plays the first file in the previous folder.

○

Scan Scans all files within the MP3 DISC.

○

Folder Scan

○

Repeat File Repeats the current playing file.

○

Repeat Folder Repeats all tracks within the current playing folder.

○

Random

○

Random Folder

○

Normal play Turns off the Scan, Repeat, and Random functions.

○

If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played.

If the DISC inserted in the CD Player is an MP3 DISC, then the MP3 will be played.

Plays all songs in the folder in which the current playing file is located for 10 seconds each.

Plays all files within the MP3 DISC in random order.

Plays all files within the current playing folder in random order.

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-9

PART 5 VOICE COMMAND SYSTEM

USB MP3

Command Operation

USB If the USB has been connected to the device, plays the MP3 files within the USB.

●

Next file Plays the next file.

○

Previous file Plays the previous file.

○

Next folder Plays the first chapter of the next folder.

○

Previous folder Plays the first chapter of the previous folder.

○

Scan Scans all files within the USB.

○

Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each.

○

Repeat File Repeats the current playing file.

○

Repeat Folder Repeats all songs within the current playing folder.

○

Random Plays all files within the USB in random order.

○

Random Folder Plays all files within the current playing folder in random order.

○

Normal play Turns off the Scan, Repeat, and Random functions.

○

USB IMAGE

Command Operation

USB If the USB IMAGE has been connected to the device, plays the image files within the USB.

●

Next image Moves to the next image.

○

Previous image Moves to the previous image.

○

5-10 VOICE COMMAND SYSTEM

Command Operation

Next folder Moves to the next folder.

○

Previous folder Moves to the previous folder.

○

iPod

Command Operation

iPod

●

Next song Plays the next song.

○

Previous song Plays the previous song.

○

Repeat song Repeats the current playing song.

○

Random Plays all songs within the iPod in random order.

○

Random Album

○

Normal play Turns off the Repeat and Random functions.

○

Plays the songs within the iPod if the iPod has been connected to the device.

Plays all songs within the current playing album in random order.

Others

Command Operation

Line in Plays the unit connected with the AUX terminal.

●

Audio on Turns on the Audio/Video.

●

Audio off Turns off the Audio/Video.

●

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-11

PART 5 VOICE COMMAND SYSTEM

Command list of Navigation system

Navigation commands will operate only agreeing to the terms and conditions for the Navigation system.

Map

Command Operation

Map Current location Displays the current position of the vehicle.

●

Zoom In Decreases the map zoom by one level.

●

Zoom Out Increases the map zoom by one level.

●

Zoom minimum Displays the map screen in the maximum zoom level.

●

Zoom maximum Displays the map screen in the minimum zoom level.

●

Zoom level <1 to 14> Displays the map in the zoom level selected from the 14 levels.

●

Zoom <scale factor> Displays the map in the corresponding zoom.

●

150 feet / 50 meters 300 feet /100 meters 700 feet / 200 meters

0.25 miles / 400 meters

0.5 miles / 800 meters 1 mile / 1.6 kilometers 2 miles / 3.2 kilometers 4 miles / 6.4 kilometers 8 miles / 12 kilometers

5-12 VOICE COMMAND SYSTEM

Command Operation

16 miles / 25 kilometers 32 miles / 50 kilometers 64 miles / 100 kilometers 130 miles / 200 kilometers 250 miles / 400 kilometers (ex.Zoom 0.25 miles, zoom 400 meters)

North up Displays the map in North Up mode.

○

Heading up Displays the map in Heading Up mode.

○

Show <POI name>

○

(ex. Show ATM)

Hide <POI name>

○

(ex. Hide ATM)

Hide all Hides all POI categories.

○

Daylight mode Converts the map display into daylight mode.

○

Night mode Converts the map display into night mode.

○

Auto mode Converts the map display is between daylight/night modes automatically.

○

Displays the selected POI categories.

Hides the selected POI categories.

[POI Category list], page 5-17.

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-13

PART 5 VOICE COMMAND SYSTEM

Destination

Command Operation

Find address Sets the destination through address search for route guidance.

●

Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search.

●

Find nearest <POI name>

●

Sets a POI near the current position as the destination by directly inputting the POI name for route guidance. [POI Category list], page 5-17.

De stination POI by phone

●

number

Find Emergency <Category>

●

(ex. Find Emergency Hospital)

Destination by address book

●

Previous destination

●

Previous start point Sets the previous start point as the current destination.

●

Go home Sets the previously registered home address as the destination for route guidance.

●

Destina tio n b y memory

●

point <1 to 5>

Sets the destination by searching the phone number of the facility.

Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships.

Sets one of the list of previously registered addresses in the address book for the user as the destination.

Sets one of the previous destination as the current destination.

Sets a previously registered memory point as the destination for route guidance

5-14 VOICE COMMAND SYSTEM

Route

Command Operation

Cancel route Deletes the designated destination and terminates the route guidance.

●

Repeat voice guidance Repeats the route guidance.

●

Detour <1 or 2 or 5 or 10>

●

miles

Detour <1 or 2 or 5 or 10>

●

kilometers

Replan recommended route Recalculates the route with the recommended route.

●

Replan shortest route Recalculates the route with the shortest route.

●

Distance to destination Reports the remaining distance until destination by voice.

●

Time to destination Reports the remaining time until destination by voice.

●

View route If the destination has been set, displays the whole route screen until the destination.

○

Start guidance Sets the scroll mark displayed on the map as the destination and starts route guidance.

○

Searches detour routes within a <1|2|5|10> mile radius.

Searches detour routes within a <1|2|5|10> kilometer radius.

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-15

PART 5 VOICE COMMAND SYSTEM

Others

Command Operation

Voice guidance on Turns the Voice Guidance On.

●

Voice guidance off Turns the Voice Guidance Off.

●

Voice guidance louder Increases the Voice Guidance volume by 1 level.

●

Voice guidance softer Decrease the Voice Guidance volume by 1 level.

●

Store marked location to <text tag>

●

(ex. Store marked location to user 1)

5-16 VOICE COMMAND SYSTEM

Registers the selected location into the selected Address book.

●

POI Category list

All restaurants Car Wash Home Specialty Store Court House

Fast Food restaurant Motorcycle Dealership Clothing shop Fire Department American restaurant All Travel Shoe Store Convention Center French restaurant Airport Pharmacy City Hall Italian restaurant Hotel All Recreation Civic Center Continental restaurant Tourist Information Amusement Park School Mexican restaurant Travel Agent Museum Government Offices Japanese restaurant Tourist Attraction Cinema Waste & Sanitary Chinese restaurant City Cnter Sports Activities Utilities Korean restaurant Rental Car Agency Sports Complex All Services Vegetarian Food restaurant Campground Golf Course Hospital Seafood restaurant Ferry Terminal Winery Dentist Latin American restaurant Bus Station Video & Game Rental Photography Asian restaurant Local Transit Ski Resort Tax Service African restaurant Train Station Recreation Area Medical Service Coffee Shop All Shopping Other Recreation Attorney Other restaurants Department Store All Financial Service Funeral Director

All automotive Convenience Store Bank Hair & Beauty

Hyundai Dealership Shopping Center ATM Cleaning & Laundry Gas Station Music Store Check Cashing Service Social Service Parking Grocery Store Money Transfer Physician Auto service Bookstore Business Facility Communication services Road Assistance Electronics Store All Community Tailor & Alteration Automobile Dealership Hardware Store Police Station Mover services Auto Parts Gifts shop Post Office Rest Area Sporting Goods store Library

VOICE COMMAND SYSTEM

VOICE COMMAND SYSTEM 5-17

PART 5 VOICE COMMAND SYSTEM

Command list of Phone

Command Operation

Call Name Makes the call to the name.

●

Dial Number makes the callto the number.

●

Redial The recently called number is redialed.

●

Recent Calls The user can select a number from the outgoing, incoming, and missed calls.

●

Command list of Help

Command Operation

Help Displays the main Help screen.

●

Destination Help Displays the Destination related command list.

●

Map Help Displays the Map related command list.

●

Radio Help Displays the FM/AM radio related command list.

●

XM Help Displays the XM radio related command list.

●

Disc Help Displays the DISC mode related command list for the disc inserted in the CD Player.

●

iPod Help Displays the iPod related Command list.

●

USB Help Displays the USB related command list.

●

Phone Help Displays the Phone help screen.

●

Voice setup Help Displays the Voice prompt settings and speaker-adaptive commands on the screen.

●

5-18 VOICE COMMAND SYSTEM

+ 70 hidden pages