Hytronik HIR23 Installation And Instruction Manual

2. Installation 1. Technical Specifications

Product type Tri-level control PIR DALI sensor

Operating voltage 9.5 ~ 22.5VDC ( suitable DALI power supply)

Input current < 8mA

Power consumption < 0.5W

Detection angle 360

o

Detection area (DxH) 10 x 3m (Tangential)

Mounting height 5m (Maximum)

Detection range 10% / 50% / 75% / 100%

Hold time 2s / 30s / 1min / 5min / 10min / 15min / 20min / 30min

Stand-by time 0s / 10s / 1min / 5min / 10min / 30min / 1h / +∞

Stand-by dimming level 10% / 20% / 30% / 50%

Daylight threshold 2Lux / 10Lux / 50Lux / Disable

Warmming-up time 30s

Operating temperature -20oC ~ +50oC

3. Rotary Switch Settings

A rotary switch is built inside the sensor for
scene selection / fast programming. Total
16 channels available:

Note: settings can also be changed by remote control HRC-11. The last action controls.

FLUSH MOUNT PIR DALI SENSOR HIR23

Installation and Instruction Manual

Rotary switch preset (Please
see the location in 2. Installation)

DALI group selection (Please
see the location in 2. Installation)

Warnings:

1. Installation of the sensor involves connecting it to the mains supply. This work must be
carried out by a specialist in accordance with electrotechnical regulations.

2. Disconnect supply before installing.

Detection
range

Channel

0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F

100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
75%
50%
100%
100%
100%

5s
1min
5min
5min
5min
5min
5min
10min
10min
10min
10min
10min
10min
30min
30min
5s

10s
5min
10min
30min
0s
+∞
+∞
10min
30min
+∞
+∞
+∞
+∞
+∞
+∞
10s

10%
10%
10%
10%
Disable
10%
30%
10%
10%
10%
30%
10%
10%
10%
30%
10%

Disable
2Lux
10Lux
30Lux
10Lux
30Lux
Disable
2Lux
10Lux
30Lux
Disable
30Lux
10Lux
50Lux
Disable
2Lux

Hold
time

Stand-by
time

Stand-by
dimming level

Daylight
threshold

5. Functions

Hytronik builds this function inside the motion sensor to achieve tri-level control, for some areas require a
light change notice before switch-off.
It offers 3 levels of light: 100%-->dimmed light-->off; and 2 periods of selectable waiting time: motion
hold-time and stand-by period; Selectable daylight threshold and freedom of detection area.

This DALI sensor is designed for incoporated in the DALI system, taking command from the DALI master,
accepting and carrying out the grouping work with up to 64 lumanaires. It can switch on/off, or dim the
assigned group members and feed back the status to the DALI master.

By connecting the DALI terminals in parallel (see wiring diagram), no matter which sensor detects motion,
all HMW23 in the group will turn on the lights when surrounding natural light is below the daylight
threshold. The sensor antenna is shared and the detection area could be widely enlarged in this way.

5.1 Tri-level Control (Corridor Function)

5.2 Synchronization Function

4. DALI group selection

DALI group configuration can be done on PC or on the rotary switch:

1. There are 16 channels available on the rotary switch. “0” is
for DALI broadcast, the rest 15 channels is for end user to
define the application unit.

2. PC grouping can overwrite rotary switch grouping, the last
setting controls.

3. The rotary switch channel is corresponding to the groups
listed below:

Switch channel DALI group Switch channel DALI group

0

1

2

3

4

5

6

7

broadcast

group 0

group 1

group 2

group 3

group 4

group 5

group 6

8

9

A

B

C

D

E

F

group 7

group 8

group 9

group 10

group 11

group 12

group 13

group 14

Infrared receiver

Photocell

LED indicator

PIR

Rotary switch preset

1

3

4

2

(1) Sensor inset
(2) Lens pluggable
(3) Protection cover (covers the
high-voltage terminals, and leaves
the DALI terminals exposed).
(4) Ceiling (drill hole O 70mm).

64.7

o85

68.1

73.3

56

Blind

70mm

Note: the blind can be plugged to the cover for
reducing detection angle if necessary.

HIR23-20160912-A2

9. Trouble Shooting

Description of the
Button Functions
(remote control HRC-11)

MALFUNCTION CAUSE REMEDY CAUSE REMEDY

The fixture does not light up

The fixture is always on

Check detection area setting

The fixture is on when it should not

Incorrect daylight threshold setting

Continued movement in the detection zone

Sudden change in temperature due to weather (wind, rain, snow) or air
expelled from fans, open windows

Detection zone not targeted

Faulty fixture

No power supply

Adjust daylight threshold setting

Replace fixture

Check power to sensor

Check detection area setting

Adjust zone, change installation site

8.

HRC-11

6

8

10

11

12

13

14

2

4

1

3

7

9

5

Ambient daylight threshold [ button ]

Detection range [ zone ]

Press buttons in zone to set detection range at 100% / 75% /
50% / 10%.

Stand-by time [ zone ]

Press buttons in zone to set the stand-by period at 0s / 10s /
1min / 5min / 10min / 30min / 1h / +∞.
Note: “0s” means on/off control; “+∞” means bi-level control, 100%
on when motion detected, and remains at the stand-by dimming
level when no presence after hold-time.

Daylight threshold [ zone ]

Press buttons in zone to set the daylight sensor at 2Lux / 10Lux /
50Lux or Disable.
Note: 100Lux / 300 Lux / 500Lux are disabled.

1. Press button Shift, the red LED is on for indication.

2. Press button , the ambient lux level is sampled and set as the
new daylight threshold.

Hold time [ zone ]

Press buttons in zone to set the hold time at 2s / 30s / 1min /
5min / 10min / 15min / 20min / 30min.
Note: 1.To set hold-time at 30s / 5min / 15min / 30min, press
button Shift at first.

2. 2s is for test purpose only, stand-by period and daylight
sensor settings are disabled in this mode.
*To exit from Test mode, press button or any button in zone .

Stand-by dimming level [ zone ]

Press buttons in zone to set the stand-by dimming level at 10% /
20% / 30% / 50%.

Dual tech & RF mode [ zone ]

All buttons in zone are disabled.

8

3

3

9

10

11

12

13

14

14

13

12

11

11

10

9

8

Permanent ON/OFF [ ]

Press button , to select permanent ON or permanent OFF mode.
* Press button / to resume automatic operation.

Power output [ button ]

All buttons in zone are disabled.

button

Auto Mode [ button ]

Brightness +/- [ button ]

All buttons in zone are disabled.

Scene prog. [ zone ] (One-key-commissioning)

Shift [ button ]

RESET[ button ]

Press button , all settings go back to the rotary switch settings.

Press button to initiate automatic mode.The sensor starts working
and all settings remain as before the light was switched ON/OFF.
Note: the function of Semi-auto is disabled.

1. Press button “Start” to program.

2. Select the buttons in “Detection range”, / “Daylight threshold”,
“Hold time”, “Stand-by time”, “Stand-by dimming level” to
set all parameters.

3. Press button “Memory” to save all the settings programmed in the
remote control.

4. Press button “Apply” to set the settings to each sensor unit(s).
For example, to pre-set detection range 100%, daylight threshold
Disable, hold time 5min, stand-by time +∞, stand-by dimming level
30%, steps should be:
Press button Start, button 100%, Disable, Shift, 5min,
Shift, +∞, 30%, Memory. By pointing to the sensor unit(s)
and pressing Apply, all settings are passed on the sensor(s).

Press button , the LED on the top left corner is on for indication.
All values / settings in RED are in valid for 20 seconds.

1

2

2

3

3

4

4

5

6

7

7

7

7

3

3

8

8 9

10

10

11

1312

11 12

13

6

5

1

2

4

2

6. Wiring Diagram Detection Pattern7.

walking across 10m

walking towards 8m

L

N

DALI power
supply

DALI

driver

Bus-mastering

DALI master

DALI

driver

DA1 DA2 DA1 DA2

HIR23-20160912-A2

HIR23HIR23