Hytera Communications VM685 User Manual
Preface
Welcome to the world of Hytera and thank you for purchasing this product. To derive optimum performance from
the product, please carefully read this manual before use.
This manual is applicable to the following product:
VM68x Remote Video Speaker Microphone
Note
Caution
Warning
Icon Conventions
The following icons are available through this manual:
Indicates references that can further describe the related topics.
:
Indicates situations that could cause data loss or equipment damage.
:
Indicates situations that could cause minor personal injury.
:
Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company)
in the People's Republic of China (PRC) and/or other countries or area. The Company retains the ownership of its
trademarks and product names. All other trademarks and/or product names that may be used in this manual are
properties of their respective owners.
The product described in this manual may include the Company's computer programs stored in memory or other
media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its
computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication,
any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may
not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written
consent of the Company.
Disclaimer
The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or
reliability is given. All the specifications and designs are subject to change without notice due to continuous
technological development. No part of this manual may be copied, modified, translated, or distributed in any
manner without the prior written consent of the Company.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of
the third-party products and contents involved in this manual.
If you have any suggestions or would like to receive more information, please visit our website at:
http://www.hytera.com.
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential requirements and other
relevant provisions of the following directives:
2006/66/EC
2011/65/EU
2012/19/EU
2014/53/EU
Please note that the above information is applicable to EU countries only.
Caution
1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
2..The product shall only use USB port to charging.
3.The max operating of the EUT is 60°C. and shouldn’t be lower than -30°C.
4.The device complies with RF specifications when the device used at 0cm form your body. Body SAR: 0.231
W/Kg
5.Declaration of Conformity
We, Hytera Communications Corporation Limited
hereby, declare that the essential requirements compliance with the Directive 2014/53/EU.
have been fully fulfilled on our product with indication below:
Product Name: RVM (Remote Video Speaker Microphone)
Brand Name : Hytera
Model : VM685
This product can be used across EU member states.
Caution:
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This RVM (Remote Video Speaker Microphone) meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram
of tissue. Device types:RVM (Remote Video Speaker Microphone) (FCC ID: YAMVM685) has also been tested
against this SAR limit. The highest SAR value reported when properly worn on the body is 0.27 W/Kg. This
device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation
distance between the user's body and the back of the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum
separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved antenna.
French statement
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had
been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209.
This equipment should be installedand operated with minimum distance 10 mm between the radiator and your
body. Thisdevice and its antenna(s) must not be collocated or operating in conjunction with anyother antenna or
transmitter.
Cet appareil est conforme aux limites d'exposition DAS incontrôlée pour la population générale de la norme
CNR-102 d'Industrie Canada et a été testé en conformité avec les méthodes de mesure et procédures spécifiées
dans IEEE 1528 et IEC 62209. Cet appareil doit être installé et utilisé avec une distance minimale de 10mm entre
This device complies with Canada Industry licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference. Including interference that may cause
undesired operation of the device.
l'émetteur et votre corps. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en
conjonction avec tout autre antenne ou transmetteur.
No.
Item
Qty.
1
Remote Video Microphone (RVM)
1
2
Battery
1
3
Belt Clip
1
4
USB Cable
1
5
Power Adapter
1
6
Documentation Kit
1
1. Packing List
1
5
6
7
8
9
10
6
7
11
12
15
16
13
17
18
19
20
14
2
3
4
No.
Part Name
No.
Part Name
1
Push-to-Talk (PTT) Key
11
Microphone 1
2
Video Recording Key
12
Speaker
3
Audio Recording Key
13
Accessory Interface (10-pin)
4
Photo Taking Key
14
Battery Latch
5
Light Sensor
15
USB Connector
6
Infrared (IR) LED
16
Emergency Alarm Key
7
LED Indicator
17
On/Off Key
8
Microphone 2
18
LCD Display
2. Product Introduction
2.1 Product Layout
No.
Part Name
No.
Part Name
9
Lens
19
Microphone 3
10
Light Compensator
20
Keys (Menu/Back Key, Left Key,
Play/Pause/Confirm Key, Right Key)
Icon
Description
WLAN is enabled.
WLAN hotspot is enabled.
BT Feature is enabled.
The wireless connection is established.
The remaining capacity of the TF card is less than 2 GB.
The TF card is full.
Earpiece connected.
:
The product is being charged when the battery is low.
:
The product is fully charged.
:
Low battery.
:
Full battery.
LED Indication
Description
Glows red
The product is transmitting.
The product is being charged.
The TF card is full.
The product is being turned off.
Glows green
The product is receiving.
The product is fully charged.
The product is being turned on.
2.2 LCD Icons
2.3 LED Indicators
LED Indication
Description
Glows orange
Call idle. You can press and hold the
PTT
key to speak.
Flashes orange rapidly
Idle status in Emergency Alarm mode.
Flashes red once every five
seconds
The battery runs low. Please recharge or replace the battery in time.
Flashes red slowly
The product is recording video.
Flashes orange slowly
The product is recording audio.
The remaining capacity of the TF card is less than 2 GB.
The LED indicator flashes red
and blue in turn.
The BT is pairing.
RVM
Dimensions (H x W x D)
24 x 106.5 x 60 mm
Weight (with battery)
<
170g
Image Sensor
16-megapixel
Camera
Fixed angle, glass, 180° rotatable, diagonal 140°, horizontal 106°, vertical
78°
Focus Range
0.1 m to infinity
Battery Life (continuous video
recording)
≥8 hours
Battery
2500 mAh
Charging Time
≤ 4 hours
Display Size
2.4 inch
Display Resolution
240 (RGB) x 320
2.4 Specifications
Loading...