Hytera Communications PD79XISU1 Users Manual

Date:2015.9.21

File No：HYTERA-I&M-79XIS-001

Rev: V1.0

Preface

Thanks for your favor in our product. To derive optimum performance from the product, please read this

manual and the supplied Safety Information Booklet carefully before use.

This manual is applicable to the following model:

PD79XIS Digital Portable Radio (X may represent 2, 5, 6 or 8).

Copyright Information

Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd. (the Company) in

PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product

names. All other trademarks and/or product names that may be used in this manual are properties of

their respective owners.

The product describes in this manual may include the Company’s computer programs stored in memory

or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company

with respect to its computer programs. The purchase of this product shall not be deemed to grant, either

directly or by implication, any rights to the purchaser regarding the Company’s computer programs. Any

of the Company’s computer programs may not be copied, modified, distributed, decompiled, or

reverse-engineered in any manner without the prior written consent of the Company.

TM

The AMBE+2

voice coding technology embodied in this product is protected by intellectual property

rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice

coding technology is licensed solely for use within this product. The user of this technology is explicitly

prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code or in any

other way convert the Object Code into a human readable form.

U.S. Patent No: #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5,754,974, #5,701,390,

#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and

#5,195,166.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of

accuracy or reliability is given. All the specifications and designs are subject to change without notice

due to continuous technology development. No part of this manual may be copied, modified, translated,

or distributed in any manner without the express written permission of us.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or

completeness of the Third Party products and contents involved in this manual.

If you have any suggestions or would like to learn more details, please visit our website at:

http://www.hytera.com.

RF Radiation Information

The radio is not intended for use by general population in an uncontrolled environment. It is only for

occupational use and only applied to work-related conditions.

The radio must be only used by users who are fully aware of the hazards of the exposure and who are

able to exercise control over their RF exposure to qualify for the higher exposure limits.

RF Radiation Profile

Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are

transmitted. RF technology is widely used in communication, medicine, food processing and other fields.

It may generate radiation during use.

RF Radiation Safety

In order to ensure user health, experts from relevant industries including science, engineering, medicine

and health work with international organizations to develop standards for safe exposure to RF radiation.

These standards consist of:

¾ United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2

sub-part J;

¾ American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)

C95. 1-1992;

¾ Institute of Electrical and Electronic Engineers (IEEE) C95. 1 – 1999;

¾ International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;

FCC Regulations

Federal Communication Commission (FCC) requires that all radio communication products should meet

the requirements set forth in the above standards before they can be marketed in the U.S, and the

manufacturer shall post a RF label on the product to inform users of operational instructions, so as to

enhance their occupational health against exposure to RF energy.

Operational Instructions and Training Guidelines

To ensure optimal performance and compliance with the occupational/controlled environment RF energy

exposure limits in the above standards and guidelines, users should transmit no more than 50% of the

time and always adhere to the following procedures:

Your radio radiates measurable RF energy only while it is transmitting (during talking), not when

it is receiving (listening) or in standby mode.

EU Regulatory Conformance

As certified by the qualified laboratory, the product is in compliance with the essential requirements and

other relevant provisions of the Directive 1999/5/EC. Please note that the above information is

applicable to EU countries only.

Contents

1. Documentation Conventions ............................................................................................................. 7

1.1 Instructional Icons ........................................................................................................................... 7

1.2 Notational Conventions ................................................................................................................... 7

1.3 Key Operation ................................................................................................................................. 7

2. Intrinsically Safe Radio Information ................................................................................................. 8

2.1 Equipment marking ......................................................................................................................... 8

2.2 No Misoperations ............................................................................................................................ 8

2.3 Safety Instructions .......................................................................................................................... 9

2.4 Specifications .................................................................................................................................. 9

2.5 Compliance Standards .................................................................................................................. 10

3. Items in the Package ........................................................................................................................ 12

4. Product Introduction ........................................................................................................................ 13

4.1 Product Controls ........................................................................................................................... 13

4.2 Programmable Keys ..................................................................................................................... 14

5. Before Use ........................................................................................................................................ 16

5.1 Charge the Battery ........................................................................................................................ 16

5.2 Assembling Accessories ............................................................................................................... 17

5.2.1 Assembling the Antenna ..................................................................................................... 17

5.2.2 Assembling the Battery ....................................................................................................... 17

5.2.3 Assembling the Belt Clip ..................................................................................................... 18

5.2.4 Attaching Audio/Programming Cable .................................................................................. 19

6. Status Indication .............................................................................................................................. 21

6.1 LCD Icon ....................................................................................................................................... 21

6.2 LED Indicator ................................................................................................................................ 21

7. Menu Navigation ............................................................................................................................... 23

8. Basic Operations .............................................................................................................................. 24

8.1 Powering On/Off ........................................................................................................................... 24

8.2 Registering .................................................................................................................................... 24

8.3 Adjusting the Volume .................................................................................................................... 24

8.4 Locking/Unlocking the Keypad ...................................................................................................... 24

8.5 Selecting a Subgroup .................................................................................................................... 25

8.6 Selecting a Group Contact ............................................................................................................ 25

9. Call ..................................................................................................................................................... 27

9.1 Private Call ................................................................................................................................... 27

9.1.1 Initiating a Call .................................................................................................................... 27

9.1.2 Receiving a Call .................................................................................................................. 28

9.1.3 Voice Communication ......................................................................................................... 28

9.1.4 Conversation Limit .............................................................................................................. 28

9.1.5 Ending a call ....................................................................................................................... 28

9.2 PSTN/PABX Call........................................................................................................................... 29

9.2.1 Initiating a Call .................................................................................................................... 29

9.2.2 Receiving a Call .................................................................................................................. 30

9.2.3 Voice Communication ......................................................................................................... 30

9.2.4 Conversation Limit .............................................................................................................. 30

9.2.5 Ending a call ....................................................................................................................... 30

9.3 Group Call ..................................................................................................................................... 30

9.3.1 Initiating a Call .................................................................................................................... 30

9.4 One Touch Call ............................................................................................................................. 33

9.5 Emergency Call ............................................................................................................................ 33

9.5.1 Initiating a Call .................................................................................................................... 34

9.5.2 Receiving a Call .................................................................................................................. 34

9.5.3 Voice Communication ......................................................................................................... 34

9.5.4 Ending a call ....................................................................................................................... 34

9.6 Queue Call .................................................................................................................................... 34

9.7 Time-out Timer (TOT) ................................................................................................................... 35

10.3.2 CPS-P3 dialing rule .......................................................................................................... 37

10.8 LQO ............................................................................................................................................ 40

10.9 Hunt ............................................................................................................................................ 40

10.9.1 TSCC Hunt ....................................................................................................................... 40

10.9.2 Hunt for Smooth Communications .................................................................................... 43

10.10 Encrypt ...................................................................................................................................... 44

10.11 Authentication ........................................................................................................................... 44

10.12 Covert Mode ............................................................................................................................. 45

10.13 Man Down (optional) ................................................................................................................. 45

10.14 Rent .......................................................................................................................................... 45

10.15 Priority ....................................................................................................................................... 45

10.18 GPS .......................................................................................................................................... 47

11. Troubleshooting ............................................................................................................................. 49

12. Care and Cleaning .......................................................................................................................... 51

1. Documentation Conventions

For your better understanding of this manual, please read the following conventions first.

1.1

1.2

Instructional Icons

Icon Description

Note Indicates references that can further describe the related topics.

Caution Indicates situations that could cause data loss or equipment damage.

Notational Conventions

Convention Description

The quotation marks enclose the name of a software interface element.

“ ”

For example, click “OK”.

The text in boldface denotes the name of a hardware button. For example,

Bold

press the PTT key.

The symbol directs you to access a multi-level menu. For example, to

1.3

->

select “New” from the “File” menu, we will describe it as follows: File ->

New.

Key Operation

Operation Definition

Short press To press a key and release it quickly.

Long press To press a key for the preset time (2s by default) and release it.

Hold To press a key and do not release it.

2. Intrinsically Safe Radio Information

2.1

FM/CAN

ATEX

IECEx

Equipment marking

z Ex ia I Ma

z Class I, Zone 0 AEx/Ex ia IIC T4 Ga z z Class I,II,III Div1 Group A,B,C,D,E,F,G T120℃

z II 1G Ex ia IIC T4

z II 1D Ex ia IIIC T120℃ IP6X

z I M1 Ex ia

z Ex ia IIC T4 Ga

z Ex ia IIIC T120 Da IP6X℃

2.2

Stop operating this product and leave the explosive atmosphere immediately when the safety or integrity

of the product is endangered, and deliver it to your local dealer for examination.

These items may endanger the product’s safety or integrity:

z The radio is stored improperly;

z The radio is faulty;

z The radio works with overload;

z The radio’s operational error or threshold value is out of allowed range.

z The radio is damaged during transportation;

z The radio’s housing is obviously damaged or cracked;

z The radio logo or model is hard to be recognized;

No Misoperations

2.3

Safety Instructions

Caution

To protect you against any property loss, bodily injury or even death, be sure to observe the following

safety instructions:

z Use only the Ex-battery BL1813-Ex and BL2413-Ex specified by the Company. The use of other

batteries may result in Ex-protection failure.

z Charge the battery in a non-hazardous area only with the designated charger.

z Use the accessories specified by the Company only.

z Do not carry any standby battery into a hazardous area.

z Do not use a damaged antenna. If a damaged antenna comes into contact with your skin, a minor

burn may result.

z Do not expose the radio to direct sunlight for a long time, nor place it close to a heating source.

z Hold the radio upright and keep its microphone 2.5 to 5 centimeters away from your mouth during

use.

z If you wear a radio on your body, ensure its antenna is at least 0 centimeters away from your body

during transmission.

z Please do not use the radio out of the operating temperature range specification of this product.

z Do not disassemble the radio or replace the accessories in a hazardous area.

z Do not remove the battery from the radio in a hazardous area.

z Do not attempt to repair and service the radio, batteries and its accessories. Please contact your

dealer for repair and servicing.

z Do not dissemble or redo the radio. Unauthorized modification of the radio may result in termination

of Ex-protection (intrinsic safety) of the radio.

z Improper usage of the product other than it is intended to be used for will impair safety of the product,

yourself and surrounding environment.

2.4

Specifications

Item Specifications

Rated Operating Voltage DC 7.4V

Max. Operating Voltage DC 8.4V

Max. Operating Current 1.8A

Weight (with standard antenna

& battery)

About 498g

Sensitivity

RF Power Output 1W

Rated Audio Power Output 0.5W

Audio Distortion 3%

Ambient Temperature -30℃–+50℃

Storage Temperature -40℃–+85℃

Charging Temperature 0℃–+40℃

Battery Ex-battery BL1813-Ex (1800mAh) / BL2413-Ex (2400mAh)

Battery Life About 14 hours (5-5-90 duty cycle)

Charging Time About 4 hours

0.70 μV/(V/m)2 to 0.85 μV/(V/m)

2

2.5

Compliance Standards

Standard Issue Date

FM

FM Class 3600

FM Class 3610

FM Class 3810

ANSI/IEC-60529(Ed. 4.0) 2004

ANSI/ISA-60079-0(12.00.01) 2009

ANSI/ISA-60079-11(12.02.01)

2005

2012

ANSI/ISA-61010-1(82.02.01)

CAN

CAN/CSA-C22.2 No.0-M91

2011

2010

2004

2006

CAN/CSA-C22.2 No.142-M1987

CAN/CSA-C22.2 No.213-M1987

2009

2008

Standard Issue Date

CAN/CSA-C22.2 No.60079-0 (Ed. 5.0)

CAN/CSA-C22.2 No.60079-11 (Ed. 5.0)

CAN/CSA-C22.2 No.60529 (Ed. 5.0)

CAN/CSA-C22.2 No.61010-1 (Ed. 2.0)

ATEX

EN 60079-0 (Ed. 5.0)

EN 60079-11 (Ed. 6.0)

EN 60529+A1 (Ed. 2.0)

IECEx

IEC-60079-0 (Ed. 5.0)

IEC-60079-11 (Ed. 6.0)

2011

2005

2009

2012

1992

2007

2011

IEC-60529 (Ed. 2.1)

2001

3. Items in the Package

Please unpack carefully and check that all items listed below are received. If any item is missing or

damaged, please contact your dealer.

Portable Radio Battery Charger

Power Adapter Antenna Belt Clip

Strap Documentation Kit

Note

And the frequency band is marked on the label of antenna; if not, refer to the label on the radio for

frequency band information.

4. Product Introduction

This section introduces the mechanical structure and the programmable key features of this product.

4.1 Product Controls

No. Part Name No. Part Name

1 SK1 (Side Key 1)

○

2 PTT Key

○

3 SK2 (Side Key 2)

○

4 TK (Top Key)

○

5 Group Call Selector Knob

○

6 Microphone

○

7 LCD Display

○

8 OK/Menu Key

○

9 Speaker

○

11 LED Indicator

○

12 Antenna

○

13

○

14 Accessory Jack

○

15 Back/Subgroup Key

○

16 Up Key

○

17 Down Key

○

18 Battery latch

○

19 Belt clip

○

Power On-Off/Volume Control

Knob

10 Numeric Keypad

○

20 Battery

○

4.2 Programmable Keys

For enhanced convenience, you may request your dealer to program the keys SK1, SK2, and TK as

shortcuts to the functions listed below. For detailed introductions of the functions, see the chapter

“Functions and Operations”.

No. Programmable Features Description

1 On-hook To disconnect the call.

2 Keypad Lock To lock or unlock the keypad quickly.

3 Adjust Power Level To adjust Tx power level quickly.

4 Private Contact List To access the menu “Contact List” quickly.

5 Current Subgroup Contact To access the menu “Subgroup” quickly.

6 Call Log To access the menu “Call Logs” quickly.

7 Operation Mode To access the menu “Mode” quickly.

8 Hunt Mode To access the menu “Hunt” quickly.

9 Manual Current Hunt To hunt and make a registration again.

10 Background Hunt To enable or disable the background hunt feature.

11 HomeStation Hunt To enable or disable the home-station hunt feature.

12 Multi-site Handover To enable or disable the multi-site handover feature.

13 Encrypt To enable or disable the encryption feature.

14 LQO To enable or disable LQO.

15 Covert Mode To enable or disable the Covert mode.

16 Emergency On To make an emergency call for help in emergent situations.

17 Emergency Off To end the emergency call.

18 Battery Power Indicator To check the battery power.

19 Man Down To enable or disable the man down function.

20 Message To access the menu “Message” quickly.

21 ReDial Call To call the last person you have contacted.

22 BackDial Call To call the last person who has contacted you.

23 Operation Mode Switch To switch the operation mode of the radio.

No. Programmable Features Description

24 One Touch Call 1-5 To call or to send a message to the preset contact quickly.

25 VOX To enable or disable the VOX feature.

Note

¾ Long and short press of a key can be assigned with different functions by your dealer. ¾ The TK key is programmed as the Emergency On/Off key by default, and is programmable by

your dealer.

5. Before Use

5.1 Charge the Battery

Use only the charger and battery specified by the company. Charger LED can indicate the charging

status, as introduced in the table below. The following figure shows the steps for charging.

Step 1 Connect the power adapter to AC socket. See arrow ①.

Step 2 Plug the power adapter into the rear jack of the charger. See arrow ②.

Step 3 Place the radio with the battery attached, or the battery alone, into the charger. See arrow ③.

During charging, the LED on the charger will indicate the charging status. The charging status begins

when the charger LED glows red. When charging is complete, the charger LED glows green.

See the following table for details.

Note

¾ To achieve optimal battery performance, please charge the battery for 5 hours before initial use.

¾ Be sure to read the Safety Information Booklet, to get necessary battery safety information.

LED Charging Status

The LED flashes red slowly. Standby

The LED glows red. Charging

The LED glows orange. 90% charged

The LED glows green. Fully charged

LED Charging Status

The LED flashes red rapidly. Failure

5.2 Assembling Accessories

5.2.1

Turn the antenna clockwise to fasten it.

To remove the antenna, rotate it counter-clockwise.

Assembling the Antenna

5.2.2 Assembling the Battery

Step 1 Align the battery slots with the guide rails on the radio, and push the battery ②.

4.3 Attaching the Battery

1. Align the battery slots with the guide rails on the terminal, and push the battery as

1

2 shows.

○

2

1

2. Open the battery latch and hold it down until the metal lock goes into the battery housing

completely.

3. Push the battery until it is fully fitted into the slot, and then release the battery latch.

4.

Note:

To remove the battery, please power off the terminal first. Then open the battery latch, and slide the

battery out while holding down the battery latch.

5

5.2.3 Assembling the Belt Clip

Step 1 Remove the screws on the back of the radio, as shown in the following figure.

Step 2 Align the screws with the screw holes in the belt clip and on the radio’s back, and then tighten

the screws.

To remove the belt clip, loosen the screws.

5.2.4 Attaching Audio/Programming Cable

Step 1 Open the accessory jack cover as the arrow shows.

Step 2 Align the plug with the accessory jack.

Caution

¾ When aligning, make sure not to scrape the silica gel surrounding the accessory jack

screw hole, in order to ensure the waterproof performance of the radio.

¾ Be sure to align the screw on the accessory connector to the screw hole in the jack

before fastening the screw.

Step 3 Tighten the screw on the connector.

To remove the accessory connector, loosen the screw.

a

n

r

c

y

E

c

a

y

a

d

u

Mcomthe

o

w

B

cmuTheLowHig

o

e

O

erecThedat

y

c

/

T

a

r

c

s

i

u

t

s

d

m

e

r

b

d

v

s

y

g

h

e

G

6. St

6.1

LC

Icon

Operation

Icon

RSSI Ico

Message

Hunt Icon

tus I

ndic

D Icon

Name

Mode

Icon

tion

Icon

T

No

M

Ne

In

Hu

ba

O Mode:

municates

trunking s

signal.

re bars indi

message

ox is full.

nt status (

kground

Radio S

In this

with other

stem.

ate better

unread me

his icon

hunt, ho

atus

mode, thi

radios or s

ignal stren

sage.

oes not in

estation

product

stems via

th.

dicate the

unt and

Roam Ico

TX Powe

Battery

Icon

Speaker I

VOX Icon

Accessor

GPS Icon

n

Icon

Strength

on

Icon

lti-site hand

radio is ro

TX power

h TX powe

M

re bars indi

Th

speaker i

V

X is active.

An

accessory

Th

GPS feat

eived.

GPS fea

a is receive

over.)

ming.

for the curr

for the cur

ate more

unmated.

s connecte

re is active,

ure is acti

d.

nt channel

ent channe

attery pow

.

and valid

e, but no

.

l.

r.

PS data is

valid GPS

6.2

The top L

LE

D Indic

D will help

tor

ou easily i

entify the c

rrent radio

status.

LED Indication Radio Status

The LED flashes

green.

The LED flashes

green slowly.

The LED glows

green

The LED glows

red

The LED flashes

red.

Powering on

Standby

Receiving

Transmitting

Making a call (the LED flashes on the calling radio).

The LED flashes

orange rapidly.

The LED flashes

orange slowly.

The LED glows

orange.

Making a FOACSU private call (the LED flashes on the called radio).

Hunting

No voice is being transmitted or received on the channel after a call is

established. Within such period, you can hold the PTT key to talk.

7. Menu Navigation

The following figure outlines your radio’s menu structure. You can personalize menu options displayed in

the radio via your dealer.

To select and confirm the options shown in the menu, press the Menu key to enter the main menu, and then press the Up/Down key to select your wanted option, finally press the OK key.

This radio supports menu reset function. If you do not operate the menu for a predefined time period, the

radio will automatically return to the home screen. You can define the reset time or cancel the reset

feature via your dealer.

8. Basic Operations

8.1 Powering On/Off

Rotate the Power On-Off/Volume Control knob clockwise/counter-clockwise until a click is heard to

turn the radio on/off.

8.2 Registering

For proper work, the radio will register with a proper base station automatically after powering on.

Hunting the control channel

Before registering, the radio will hunt through the control channels for available base stations.

Step 1 The radio will start hunting automatically after powering on.

There are two hunting plans available. For details, see “Hunt” in “Functions and Operations”

chapter. You need to preset the hunt plan by your dealer. The two hunt plans are:

z Fixed Control Channel

z Flexible Control Channel

Step 2 During the hunt, both the prompt “Registering, Please Wait!” and the icon appear on the LCD,

and the LED flashes orange slowly.

Making a registration

Step 1 When hunting signals of the base station, the radio determines whether the base station allows

it to register.

Step 2 After registering successfully, the radio will display the prompt “Registered Successfully!” on the

LCD. Then it is ready for use. If you want the radio to register with another base station, press

the programmed Manual Current Hunt key to hunt again.

Note: It is highly recommended to put the frequently used frequencies of base stations in the control

channel list via your dealer.

8.3 Adjusting the Volume

After turning on the radio, rotate the Radio On-Off/Volume Control knob clockwise to increase the call

volume and group number notifying volume, or counter-clockwise to decrease them.

8.4 Locking/Unlocking the Keypad

When the keypad is not in use, you can lock it through any of the methods below to prevent accidental

keypad operation.

z Combined Function Key

Use “OK+ ” to lock or unlock the keypad.

z Programmable Keys

Press the programmed Keypad Lock key to lock or unlock the keypad.

z Menu Selection

Go to “Settings -> Radio Set -> Keypad Lock”, and then select “Enable” or “Disable”.

¾ Enable: The keypad will be locked automatically if no operation is made within the preset time

period.

¾ Disable: The keypad will not be locked automatically. However, you can lock or unlock the keypad

via the key combination or Keypad Lock key mentioned above.

Note: When the feature “Keypad Auto Lock” is enabled, the keypad will be locked automatically if no

operation is made within the preset time period. You can use the “Disable" option in the menu “Keypad

Lock” to deactivate the Keypad Auto Lock feature.

8.5 Selecting a Subgroup

You can include your desired group call contacts into a subgroup for efficient management. The radio

supports up to 32 subgroups, each with a maximum of 16 group call contacts.

You may select a subgroup through any of the following methods:

z Menu

Go to the menu “Subgroup -> Members -> Group Call”, Afterwards, select “Set Default” and press the

OK key to switch to that subgroup.

z Shortcuts

In the home screen, directly press the Subgroup key to enter the subgroup menu and select the

subgroup.

Note: This radio supports only one subgroup list which can contain 32 subgroups at most.

8.6 Selecting a Group Contact

Operation

After the radio is powered on and makes a registration successfully, you may select a group call contact

through any of the following methods:

z Knob

Rotate the Group Call Selector knob to select your desired group call contact. An audio alert and

the prompt “No Group Program” will be given in case of no group call contact preset for this knob.

z Menu

Go to the menu “Subgroup -> Members -> Group Call”, and press the Up /Down key to select the

group call contact.

z Shortcuts

You can press the programmed Group Call List key to access the group call list, and select the group call contact by pressing the Up/Down key.

Group Call Attribute

Group call attribute means the attribute of a group that the group call contacts are in. It is set by the

dealer. This radio supports four group call attributes: Background, Response, Participant and Radio ID.

You can only find and call the contacts of Participant and Response in the subgroup member list, and

receive group calls from the Response, Participant and Background. To receive different attributes of

group calls, you need to have different configurations to the radio as listed below:

Note: When the Radio ID is selected by the Group Call Selector knob, the radio can receive any

group call made by the available group call contacts.

Group Call

Attribute

Response

Participant

Background

Settings

If the group call contact is available in the subgroup member list, the radio can

receive the group calls made to this group without any operation by the Group Call Selector knob.

Only when the Participant group call contact or the Radio ID is selected by the

Group Call Selector knob, can the radio receive the group calls made to this

group.

This group call contact is unavailable. Only when this group call contact is preset

by the dealer, can the radio receive the group calls to this group.

a

o

s

O

n

S

U

n

r

t

L

nCa

s

r

s

D

u

C

P

u

m

d

a

w

a

m

a

l

M

o

l

c

o

c

d

n

h

o

e

h

a

m

s

e

a

l

T

s

T

t

T

C

e

d

t

d

o

Y

>

a

o

n

a

e

U

h

r

n

>

o

u

e

m

c

e

c

r

n

a

s

w

s

w

y

c

.

e

a

n

T

u

o

M

d

5

m

n

c

n

o

l

g

r

9. C

To ensure

centimeter

Note:

Selector k

9.1

Private call

z FOAC

z OACS

9.1.1

When the

given until

Pri

automa

I

ll

ptimal vol

away fro

nce the ra

ob, the ra

vate C

supports t

U: During c

: During ca

tically.

itiating

adio trans

he called p

me of the r

your mout

io hasn’t m

io cannot

ll

o call type

all setup, th

ll setup, the

Call

its a privat

rty answer

ceiving ra

.

de a regis

ake a call.

, FOACSU

e calling ra

calling radi

call, the ic

s this call.

io, keep th

ration or no

and OACS

io rings. T

does not

n wi

ou may tra

microphon

group call

, configure

e called pa

ing. The cal

ll appear o

smit a priv

approxim

ontact is pr

d by the tru

ty answers

led party a

the LCD.

te call thro

tely 2.5 to

eset for the

king syste

the call ma

swers the

he ring indi

gh any of t

Group Cal

.

ually.

all

ation is

he followin

methods.

Contact

Step 1 E

Step 2 U

Step 3 Pr

ReDial o

Step 1 In

Step 2 U

Step 3 Pr

Manual

Step 1 In

“F

ist or Ca

ter the Con

lls (path: “

e the Up/D

ess the

BackDia

the home s

e the Up/D

ess the

ial

the home s

nctions an

l Logs

tact List (p

enu -> Cal

wn key to

or the P

Call Log

reen, pres

wn key to

or the P

reen, inpu

Operation

th: “Menu -

Logs”).

select the p

T key to m

the

select the p

T key to m

a private c

s” chapter f

Contact -

rivate call c

ke a call.

or

rivate call c

ke a call.

ll number

r the rang

Contact Li

ntact you

key to acce

ntact you

sing the ke

of private

t”) or Outg

ant to call.

s the appr

ant to call.

pad. See “

all number.

ing/Incomi

priate call l

anual Dial

g/Missed

g.

” in

Step 2 Pr

Missed

Press the

press the

ess the

all Scree

TT key in t

key

key, PT

e “Missed

r the PTT k

key or

all” scree

y to call b

key to

to directly

ck when vi

ake a call

all back th

wing that c

last misse

ll number.

private cal

l contact, o

e

v

D

e

w

P

e

Vo

k

o

v

m

c

s

c

n

c

h

g

C

r

o

d

h

a

m

s

w

c

t

e

i

m

l

c

t

e

x

a

c

l

a

e

u

n

e

w

a

y

n

a

“

t

a

w

m

w

e

y

w

p

o

e

a

e

w

t

p

e

d

e

w

n

g

e

l

h

o

r

a

d

i

n

s

e

o

c

h

d

l

y

g

n

9.1.2

R

FOACSU

When a pri

on the LC

call, and th

the radio

OACSU

The call is

successfull

9.1.3

After a priv

if the PTT

transmissi

9.1.4

C

ceivin

Private

ate call ar

as well. Y

radio will

ill display t

rivate C

stablished

y.

ice Co

ate call is e

ey is free

n and the i

nversa

a Call

all

ives, both ri

u may pres

isplay the i

e icon

ll

automatica

munic

tablished,

ith the LCD

on

ion Lim

ng and vibr

s the

on . An

to remind

ly. The ico

tion

ither the c

displaying

pon receip

it

tion indicat

or PTT ke

alert tone ou.

will a

lling party

PTT Enabl

respectivel

ion will be g

within the

ill be given

pear on th

r the called

d!”. The ra

y.

iven, with t

preset time

as well. If y

LCD when

party can t

io will displ

e icon

period to a

u don’t an

this call is

ansmit a v

y the icon

displaye

swer the

wer this cal

stablished

ice call onl

durin

,

When a pri

in a real-ti

z At the

The cal

period i

time.

z At the

The cal

ate call is

e way. Se

alling party

ling party w

program

alled party

led party wi

stablished,

the followi

ll display th

ed by your

l display th

both the c

g figure.

total allo

dealer. The

actual co

lling party

ed time for

call will be

munication

nd the call

a call in a

nded whe

time.

d party will

ay of count

its duratio

isplay the

ng down. T

exceeds t

all duratio

is time

e preset

9.1.5

The voice

z Neither

z The cal

z Either t

E

ding a

ommunica

of the parti

l duration e

e calling p

all

ion will be t

s holds do

ceeds the

ty or the c

rminated

n the PTT

llowed tim

lled party

hen one of

key to talk

preset by

nds the in-

the followin

ithin the pr

he dealer.

rogress ca

situations

set time.

l.

occurs:

o

h

m

c

n

r

p

L

n

a

s

r

s

D

C

T

a

o

B

n

a

m

l

M

o

l

c

o

c

r

P

a

P

E

n

e

n

a

c

s

Y

a

l

k

s

k

t

e

n

+

i

T

C

o

s

p

B

a

>

P

u

D

T

m

u

P

n

t

w

m

r

T

i

T

>

c

l

c

l

y

c

b

t

a

g

l

u

s

t

s

t

d

O

h

P

u

m

c

o

e

c

e

p

e

g

n

o

e

c

r

z Signal

z Either t

z A pre-e

9.2

The radio

PABX call,

9.2.1

When the

the called

PS

I

Contact

Step 1 E

C

Step 2 U

f base stati

e calling p

ptive call

TN/PA

an make a

the followin

itiating

adio trans

arty answe

ist or Ca

ter the Con

lls (path: “

e the Up/D

on is missi

rty or the c

r emergen

X Call

d receive a

g operation

Call

its a PSTN

rs this call.

l Logs

tact List (p

enu -> Cal

wn key to

g.

lled party

y call occu

PSTN/PA

are based

call, the ico

ou may tr

th: “Menu -

Logs”).

select the

elects an e

ies the cur

X call. Sinc

on the PS

n w

nsmit a PS

Contact -

STN conta

pty group

ent channe

e PSTN cal

N call.

ll appear. T

N call thro

Contact Li

t you want

by the Gro

l.

has the sa

he ring indi

gh any of t

t”) or Outg

o call.

p Call Sel

e calling

ation will b

he followin

ing/Incomi

cto

knob.

rocess with

given until

methods.

g/Missed

Step 3 Pr

ReDial o

Step 1 In

Step 2 U

Step 3 Pr

Manual

Step 1 In

sc

z

ess the

BackDia

the home s

e the Up/D

ess the

ial

the home s

hemes. (Fo

CPS-P/C

1343-E Di

Note

To m ak e

¾

CPS-

¾

1343-

or PTT

Call Log

reen, pres

wn key to

or PTT

reen, inpu

details, se

S-P3 Diali

aling: *01*

PABX call,

/CPS-P3 D

Dialing: *0

ey to make

the

select the

ey to make

a number

“Manual

g: 01 + PS

PSTN nu

enter the n

aling: 02 +

2* + PABX

a PSTN ca

or

STN conta

a PSTN ca

sing the ke

ial” in “Fun

N number.

ber.

mber acco

ABX num

umber.

l.

key to acce

t you want

l.

pad accor

tions and

rding to eit

er.

s the appr

o call.

ing to eith

perations”

er of the fol

priate call l

r of the foll

hapter).

lowing sch

g.

wing

mes.

Step 2 Pr

Missed

Hold the P

press the

ess the

all Scree

T key in th

or th

key, PT

“Missed

PTT key t

key or

all” screen

call back

key to

o directly c

hen viewin

ransmit a

ll back the

that call n

STN call.

last missed

mber.

PSTN call

ontact, or

e

S

D

c

e

Vo

S

o

S

l

n

c

h

m

d

h

o

h

a

c

w

s

n

r

f

g

v

o

t

m

e

h

t

e

w

c

t

a

o

a

s

l

a

s

e

g

w

a

m

e

n

a

l

a

h

y

r

e

a

c

n

a

h

n

a

t

s

h

n

c

p

e

k

s

p

y

e

w

p

e

p

s

o

y

l

m

n

o

y

n

c

e

p

r

m

h

u

d

v

o

y

l

t

g

l

n

a

u

e

t

u

n

e

a

e

h

e

d

r

h

9.2.2

When a P

on the LC

call.

When the

don’t answ

R

9.2.3

When a P

radio cann

9.2.4

When a P

of counting

The call wi

C

ceivin

TN call arri

as well. Y

all is establ

r this call,

ice Co

TN call is

t receive t

nversa

TN call is

down. The

l be ended

a Call

es, both ri

u may pres

ished, the r

he radio wi

munic

stablished,

e voice of t

ion Lim

stablished,

called part

hen its du

g and vibra

s the

dio will dis

l display th

tion

you can tal

e PSTN u

it

the calling

will displa

ation exce

tion indicati

or PTT ke

lay the ico

icon

by holding

er.

arty will dis

the actual

ds the pres

n will be gi

within the

. Ring

to remind y

the PTT ke

play the cal

ommunica

et time.

alert will be

en, with th

preset time

u.

. When tra

time prese

ion time.

icon

period to a

given as w

nsmitting th

by the de

displaye

swer the

ll. If you

voice, the

ler in a way

9.2.5

The voice

z The cal

z Either t

z A pre-e

z The ra

z Either t

z Either

z Signal

9.3

Group call

party and t

while the c

E

Gr

ding a

ommunica

l duration is

e calling p

ptive call

io switches

e calling p

f the partie

f base stati

up Ca

includes ge

e called p

lled party i

all

ion will be t

over the all

rty or the c

r emergen

its operatio

rty or the c

turns off t

on is missi

l

neral group

rty can spe

able to lis

rminated

owed time

lled party

y call occu

mode via

lled party

e radio or l

g.

call and br

k. Howeve

en to it onl

hen one of

reset by th

nds the in-

ies the cur

the menu.

elects an e

gs out of t

adcast gro

r, in a broa

.

the followin

dealer.

rogress ca

ent channe

pty group

e system.

p call. In a

cast call, o

situations

l.

by the Gro

general gro

ly the calli

occurs:

p Call Sel

up call, bot

g party can

cto

knob.

the calling

speak,

The radio

As these t

difference

9.3.1

When the

any of the

annot mak

o types of

in the follo

I

itiating

adio trans

ollowing m

a broadca

roup calls

ing sectio

Call

its a group

thods.

t group cal

ave the sa

.

all, the ico

unless the

e operatio

will

dealer auth

ns in gener

appear. Yo

orizes it.

l, we will o

may trans

ly detail th

mit a group

ir

call throug

e

t

o

e

o

s

o

r

s

o

To

D

u

e

s

l

r

c

p

o

s

t

a

O

l

c

o

s

y

r

K

c

d

t

g

u

e

P

s

e

b

G

y

s

k

G

h

o

t

r

T

o

a

k

g

s

t

e

l

o

m

S

r

g

n

u

t

B

y

g

t

a

s

e

S

h

o

a

p

e

a

p

u

a

g

c

e

r

e

h

M

i

T

k

p

g

s

Transmit

ting a cal

to the pr

set cont

ct

In the hom

Call Selec

Group C

Step 1 In

th

Step 2 G

Step 3 U

Step 4 Pr

Y

ReDial o

screen, p

o

knob tu

essing the

ns to.

ntact

the home s

Subgrou

to “Subgr

e the Up/D

ess

u can also

key or

Note

To m ak e

press the

BackDia

reen, pres

key to ent

up -> Mem

wn key to

or PTT key

elect the “

he PTT ke

broadcast

K key,

Call Log

TT key will

the Menu

r the “Sub

ers”.

select the g

to make a

eneral Gro

to make th

group call,

key or

transmit a

ey and the

roup” men

roup call co

roup call.

up Call” as

e call.

elect the “

he PTT ke

roup call t

select the

.

ntact you w

he “Call Ty

roadcast G

.

the group

“Subgroup”

nt to call.

e”, and th

roup Call” a

all contact

menu, or d

n press the

s the “Call

the Group

rectly pres

OK key,

ype”, and

Step 1 In

Step 2 U

Step 3 Pr

Y

or

Manual

Step 1 In

“F

z

the home s

e the Up/D

ess the

u can also

the PTT ke

Note

make a b

p

ress the O

ial

the home s

nctions an

General g

Broadcas

number.

reen, pres

wn key to

or PTT

elect the “

to make t

oadcast gr

key,

reen, inpu

Operation

roup call: g

group call:

the

select the g

ey to mak

eneral Gro

e call.

up call, sel

key or the

a group ca

s” chapter f

oup call nu

In both CP

or

roup call co

a general

up Call” as

ct the “Bro

PTT key.

l number u

r the rang

ber

-P and CP

key to acc

ntact you w

roup call.

he “Call Ty

dcast Gro

ing the key

of group c

-P3 dialin

ss the app

nt to call.

e”, and pr

p Call” as t

pad. See “

ll number.

schemes, i

opriate call

ss the OK

e “Call Ty

anual Dial”

nput *11*+

log.

ey,

e”, and

in

roup call

Step 2 Pr

9.3.2

You can re

be given a

ess the

R

ceivin

ceive a gro

well.

key, PT

a Call

p call with

key or

ut any ope

key

ation and t

to make a

e radio will

all.

display the

icon . Ri

ng alert will

9.3.3 Late Entry

After a group call is established, other group members are allowed to join it without any operation.

The late entry feature is used in the following situations:

z The called party is not in the group operation range until the group call is established.

z The called party is not powered on until the group call is established.

z During the initiation of the group call, the called party is in another call (a private call or a group call).

When the call is over, the group call is still on.

z During the initiation of the group call, the called party is within poor signal coverage or is

encountering with the radio interference, and the signal gets better during the group call.

z A new member joins when the group call is established.

9.3.4 Voice Communication

z General Group Call: After the call is established, either the calling party or the called party can

transmit a voice call only if the PTT key is free with “PTT Enabled!” displayed on the LCD. The radio

will display the icon upon transmitting and the icon upon receipt respectively.

z Broadcast Group Call: After the call is established, only the calling party can talk by holding the PTT

key. When transmitting the voice, the calling party will display the icon on the LCD. As for the

called party, it can only receive voice.

9.3.5 Conversation Limit

When a general group call is established, both the calling party and the called party will display the call

duration in a real-time way. See the following figure.

z At the calling party

The calling party will display the total conversation time for the call in a way of counting down the total

allowed time. This time period is programmed by your dealer. The call will be ended when its duration

exceeds the preset time.

z At the called party

The called party will display the actual conversation time. The timer will start counting once the called

party joins the group call. If the called party takes the initiative to exit from this call and then rejoins it

later, recount will be initiated.

9.3.6 Ending a call

General Group Call

The voice communication will be terminated when one of the following situations occurs:

z Neither of the parties holds the PTT key to talk within the preset time.

z The call duration exceeds the allowed time preset by the dealer.

z The calling party ends the in-progress call.

z Signal of base station is missing.

z A pre-emptive call or emergency call occupies the current channel.

Note:

If you hold the PTT key while some one is speaking, your radio will keep beeping, alerting you to transmission prohibition. To stop beeping, please release the PTT key. When the PTT is free, you can hold the PTT key to transmit.

Broadcast Group Call

The call will be terminated when one of the following situations occurs:

z The call duration exceeds the allowed time preset by the dealer.

z The calling party ends the in-progress call.

z Signal of base station is missing.

z A pre-emptive call or emergency call occupies the current channel.

9.4 One Touch Call

You dealer can set 5 One Touch Call shortcuts at most for you. This feature is used for calling the

contact or sending the message quickly. The contact, call type and the message contents are all preset

by the dealer.

Operation: To initiate a call or send a message, press the programmed One Touch Call key.

9.5 Emergency Call

In case of an emergency, you can use the feature to ask for help from your companion or control center.

Emergency call is the highest-priority call which can disconnect any ongoing normal calls.

Only when the radio is authorized to emergency call, can it transmit such calls.

n

r

y

s

p

w

D

e

Vo

m

o

n

h

e

o

h

e

B

i

e

u

c

s

a

m

h

d

r

c

g

c

m

a

P

c

x

p

r

e

c

m

t

T

y

a

s

d

u

a

n

a

h

E

c

s

t

m

o

a

n

d

o

e

r

n

e

n

t

u

p

D

y

t

c

o

f

e

n

t

y

t

a

c

a

g

o

B

r

p

y

l

0

r

s

e

m

n

y

s

o

e

c

s

n

e

9.5.1

When the

emergenc

I

Shortcut

Press the

by the deal

Man Do

Man Down

Manual

Step 1 In

ke

Step 2 Pr

9.5.2

When an e

R

itiating

adio trans

call throug

rogramme

er.

n Trigge

alarm will t

ial

the home s

ypad.

ess the

ceivin

mergency

Call

its an emer

any of the

Emergen

igger an e

reen, inpu

key, PT

a Call

all arrives,

gency call,

following

y On key t

ergency c

“*9* + the

key or

ou can ans

he icon

ethods.

transmit a

ll to the call

umber you

key to

wer it witho

will appe

emergenc

ed party se

want to call

ransmit an

t any oper

ar. You ma

call to the

by the dea

(e.g.: *9*8

emergency

tion.

transmit a

called part

er.

020200)” u

call.

configured

ing the

9.5.3

After an e

PTT key is

transmissi

9.5.4

The emerg

z The cal

z When t

z Signal

z When t

E

Emerg

Note:

ice Co

ergency c

free with “

n and the i

ding a

ency call wi

l duration e

e emergen

ncy mode.

f base stati

e emergen

ncy mode.

oth calling

munic

ll is establi

TT Enable

on

tion

hed, either

!” displaye

pon receipt

all

ll be termin

ceeds the

cy call is m

on is missi

cy call is m

arty and t

ted when

llowed tim

de to the g

g.

de to the p

e called pa

the calling

on the LC

respectivel

ne of the fo

preset by

roup conta

rivate call c

ty adopt dif

arty or the

. The radio

.

llowing situ

he dealer.

t, the callin

ntact, both

erent meth

alled party

will display

tions occu

party end

parties end

d to exit th

can speak

the icon

s:

the call or

Emergen

nly if the

during

xits the

xit the

y mode.

¾

Call

ng Party: p

¾

Call

d Party: pr

9.6

When the

of channel

Q

eue Ca

hannels ar

. When the

esses the

sses the T

ll

busy, the

radio make

mergency

K key withi

alls will qu

a call with

Off key.

1s after pr

ue accordi

a low priori

ssing the

g to their p

y, it will dis

ack key.

iorities for t

lay the pro

he system'

pt “Queue

distributio

Call” on th

LCD.

9.7 Time-out Timer (TOT)

The purpose of TOT is to prevent any user from occupying a channel for an extended period. If the

preset time expires, the radio will automatically terminate the transmission and keep beeping. To stop

beeping, please release the PTT key. You must wait for a certain time period (preset by your dealer) to

initiate another transmission.

e

n

e

M

a

C

a

>

V

a

e

d

e

N

d

o

M

p

e

C

n

o

c

u

p

o

0

s

e

t

a

n

h

D

a

o

a

r

n

C

t

e

c

s

p

n

s

a

c

t

a

T

h

w

a

d

i

h

“

v

e

r

u

D

s

F

h

c

u

h

s

w

d

p

T

)

n

c

a

M

L

e

n

s

t

”

c

m

t

.

e

.

10. F

10.1

The featur

In the editi

menu imm

immediatel

10.2

You can m

10.2.1

You can s

“Contact -

iewing

You can vi

H

uncti

ome S

allows yo

g screen,

diately; in

y.

anagin

nage your

ontact

ve up to 20

Contact Li

Contact

w the alias

ns

reen

to quickly

ress the

ther scree

g the

private call

List

entries of

t” or press

and numb

nd O

eturn to the

key, a

s, press thi

ontact

contacts vi

private call

he shortcu

r of the con

erat

previous m

d the radio

key and t

the menu

ontact info

key for Pri

acts.

ons

enu or the

exits the s

e radio ret

Contact” in

rmation in t

ate Call Co

ome scree

reen and re

rns to the h

the radio.

e list. To a

ntact.

.

turns to the

ome scree

cess the li

Editing a

You can e

Deleting

You can d

10.2.2

You can a

alias can c

chapter.

Note:

¾

You

¾

You

10.3

You can in

Contact

it the numb

a Contac

lete a cont

ew Co

d a new co

ntain 16 c

can press t

can save t

anual

ut the priv

r and alias

ct from the

tact

tact to the

aracters at

e

e numbers

ial

te or group

of the cont

contact list.

ontact list.

most. For t

key to s

from the C

contact ID

cts.

Please not

he numbe

e number

itch the inp

ll Logs, Re

manually u

that the lis

and alias o

ange, plea

t method

ial List an

ing the key

t must cont

f each cont

e refer to “

hen editing

BackDial

ad to mak

in one con

ct must be

anual Dial

the alias.

ist into the

a call .

act at least

unique. Th

in this

ontact list.

In the hom

10.3.1

Number

A contact

screen, in

PS-P d

umber is c

put your de

ialing ru

mposed of

ired ID, an

le

3 parts: NP

press the

(3 digits) +

, PT

N (2 digits

, or

+ UN/GN (

key to

3 digits), to

ake a call.

ally 8 digits

z NP (the number prefix) range: 328–899

z FN (the fleet number) range: 20–65 (for private call), 20–99 (for group call)

z UN (the unit number, for private call) range: 200–899; GN (the group number, for group call) range:

900–999

Dialing rules

z In-fleet call: to directly dial UN/GN (3 digits) only.

z Inter-fleet call: to dial the FN (2 digits) + UN/GN (3 digits).

z Inter-prefix call: to dial the NP (3 digits) + FN (2 digits) + UN/GN (3 digits).

10.3.2 CPS-P3 dialing rule

Number

A contact number is composed of 3 parts: NP (3 digits) + FN (2 digits) + UN/GN (3 digits), totally 8 digits.

z NP (the number prefix) range: 328 – 899

z FN (the fleet number) range: 20 – 89 (for both private call and fleet group call); 90, 97, 98, 99 (for

hierarchical group call).

z UN (the unit number)/GN (the group number) range

¾ For private call: When FN ranges from 20 to 41, UN will range from 200 to 899; when FN ranges

from 42 to 89, UN will range from 200 to 549.

¾ For fleet group call, GN range is 900 – 999; for hierarchical group call, GN range is 000 – 999.

Dialing rules

z In-fleet call: to directly dial UN/GN (3 digits) only.

z Inter-fleet call: to dial the FN (2 digits) + UN/GN (3 digits).

z Inter-prefix call: to dial the NP (3 digits) + FN (2 digits) + UN/GN (3 digits).

10.3.3 1343-E dialing rule

This feature allows you to customize the dialing rules. You can request your dealer to customize the

dialing rule according to your actual needs. Please note that the user should follow the same scheme in

the same trunking system and each contact number is unique.

To learn more details regarding this dialing rule, please contact your local dealer.

10.4 Message

Sending a message

Step 1 Go to “Menu -> Message -> New Message” to enter the relevant interface .

Step 2 Type the text and press the OK key.

Step 3 Select the contact or input the contact number manually.

Step 4 Press the OK key to send the message. When the message is sent successfully, the radio will

display “Send Success!” on the LCD.

You can send the Quick Text or Status Message or forward the message saved in the InBox, OutBox or

Drafts. See the detailed introductions of the submenus of Message respectively.

New Message

You can create a new text message (23 characters at most) and save it to Drafts, or send it to a private

call contact or a group call contact.

Quick Text

Under this option there are some text messages (10 entries at most) preset by your dealer. You can

choose to edit and send any entry.

Status Message

Status Message contains the status code rather than the text, to ensure privacy of your communication. It

is preset by your dealer via the programming software. You can send but not edit the message.

InBox

The radio saves the received messages into the InBox and gives every message a corresponding icon

to show whether it is read.

z : Read message

z : Unread message

z : Read status message

z : Unread status message

The InBox can save up to 50 received messages. When it is full, the icon will appear, and the

earliest message will be overwritten by the latest one automatically.

z For each message, you can choose to perform any of these operations: Reply, Forward (Status

Message excluded), View Details and Delete.

z To delete all messages in the InBox, select “Message -> Inbox -> Delete All”.

OutBox

The OutBox can save up to 50 sent messages. The following icons will appear to indicate whether the

message is sent successfully.

z : Message is sent successfully.

z : The message is not sent successfully. In this case, you can resend it.

z : Status Message is sent successfully.

z : Status Message is not sent successfully. In this case, you can resend it.

When the OutBox is full, no icon will appear on LCD to alert you. In addition, the earliest message will

t

c

g

t

m

e

.

t

C

s

n

d

:

c

s

n

M

e

u

V

a

h

t

X

e

p

a

,

)

a

p

s

a

s

h

s

e

r

p

a

s

C

r

P

r

,

b

d

u

h

a

O

t

m

s

D

f

e

u

e

g

C

a

d

X

f

e

m

w

c

l

u

e

n

e

y

o

c

a

n

m

e

D

v

a

O

-

o

T

s

a

d

t

a

x

,

n

e

>

B

d

t

s

t

g

w

n

o

a

e

A

t

a

n

c

s

e

t

n

m

a

d

w

l

o

a

n

m

D

o

e

be overwri

z For ea

Messa

z To dele

Drafts

The Drafts

overwritten

For each

z After th

Outbox

z To dele

10.5

The radio

ten by the l

h message

e excluded

e all mess

can save u

by the late

essage, yo

message

e all mess

all Log

aves only t

test one a

you can c

, View Det

ges in the

to 20 draf

t one auto

u can choo

in the Draft

ges in the

e entries o

tomatically.

oose to per

ils and Del

utBox, sel

messages.

atically.

e to perfor

is sent, it

rafts, sele

private cal

orm any of

te.

ct “Messag

When the

any of the

ill be remo

t “Message

s, PSTN c

these oper

e -> Outbo

rafts is full

se operatio

ed from th

-> Drafts -

lls and PA

tions: Res

-> Delete

the earlies

s: Send, S

Drafts and

Delete All”.

X calls but

nd, Forwar

ll”.

message

ve and De

be saved t

ot group c

(Status

ill be

ete.

the

lls.

At most 10

Outgoing/I

The Misse

Operation

menu dire

After acce

to initiate a

Outgoing/I

10.6

This featur

product wil

proper vol

10.7

call entries

coming/Mi

list includ

You can p

tly via the

sing a list

call, add th

coming/Mi

IC AG

can be en

l control the

me for the

OX

can be sav

sed list is f

s the miss

ess the Me

rogrammed

nd selectin

e entry to

sed list at

abled by yo

audio gain

eceiving ra

d in the O

ll, the earli

d FOACSU

nu key to e Call Log k

an entry,

ontact List

time, sele

ur dealer vi

to a proper

io.

tgoing/Inco

st entry wil

calls and

ter “Menu

y.

ou can perf

r delete it.

t “Call Log

the progr

range durin

ming/Misse

l be overwri

ACSU call

> Call Log

rm any of

o delete al

-> Outgoin

mming soft

transmiss

list respe

ten by late

.

” menu, or

hese opera

l entries in t

/Incoming/

are. Whe

ion, providi

tively. Whe

t one auto

nter the “C

ions: hold t

he

Missed ->

it is enable

g improved

the

atically.

all Logs”

he PTT key

elete All”.

d, the

voice with

VOX indic

instead of

volume to

When VO

To enabl

Press the

tes that the

olding the

rigger the t

is enabled

or disa

rogramme

voice trans

TT key. W

ansmission

the icon

le the VO

VOX key.

mission ca

hen the mic

, the trans

will app

feature

be initiate

rophone de

ission is st

ar on the L

by speaki

ects that y

rted autom

CD.

g into the

ur voice re

tically.

icrophone

ches the r

f radio

quired

Select “Menu -> Settings -> Radio Set -> VOX” menu.

Adjust VOX Gain Level

You can adjust the sensitivity of microphone transmission via the “Menu -> Settings -> Radio Set -> VOX

-> Gain Level” menu. The bigger the gain level, the higher the gain and the lower the sensitivity. Thus,

the high volume is required to trigger the transmission.

z Internal VOX Gain Level: the sensitivity of internal microphone transmission.

z External VOX Gain Level: the sensitivity of external microphone transmission.

Caution: Please adjust the VOX Gain Level properly on your actual requirements.

10.8 LQO

This feature enables the radio to adjust the received voice volume automatically in standby mode to fit

different using environments, as well as making the heard voice clear.

Operation: You can enable or disable the LQO feature by pressing the programmed LQO key or via the

“Settings -> Radio Set -> LQO” menu.

10.9 Hunt

There are two types of hunt in different stages: the TSCC hunt during registration and the hunt for

smooth communications after registration.

10.9.1 TSCC Hunt

In trunking system, the radio is required to register with a base station prior to normal operation. Before

registering, the radio will hunt through the control channels for available base stations. During hunting,

the LCD displays “Registering, Please Wait!” and the icon , and the LED flashes orange slowly.

There are two hunt plans: Fixed Control Channel and Flexible Control Channel. You can set the

appropriate plan via your dealer.

Fixed Control Channel

There are certain rules to define the frequency distribution of the Fixed Control Channel together. If the

trunking user frequency has such characteristic, you can configure the frequency for the radios together

via the Fixed TSCC, and adopt the Fixed Control Channel plan.

If you adopt this plan, you can select the hunt mode by going to “Hunt -> TSCC Hunt” menu or pressing

the programmed Hunt Mode key to access “Hunt” menu quickly.

See the hunt modes as follows:

z Short Hunt

In this mode, the radio will hunt for the last 10 control channels on which it registered successfully. If

the radio fails to register on all the 10 channels, it will orderly hunt the channels in the Fixed TSCC

List preset by the dealer. The hunt process would recycle until the radio registers with a base station

successfully.

Start

Hunt for the last 10

registered channels

z Comprehensive Hunt

Register successfully

Yes

No

Hunt for fixed control

channel

No

Register successfully

Yes

Update the latest 10

registered channels

End

If Short Hunt brings no successful registration, Comprehensive Hunt will go from the channel defined

at Lowest of Comprehensive Hunt. During the hunt, after every 100 channels are hunted, the

previously mentioned 10 channels would be hunted again. If no successful registration is achieved

after comprehensive hunt, the hunt will go on with the Fixed TSCC List. The hunt process would

recycle until the radio registers with a base station successfully.

z Team Hunt

The radio will hunt for the last 10 control channels on which it has worked. If the radio fails to register

on all the 10 channels, the team hunt will start with the Fixed TSCC List preset by the dealer. The

hunt process would recycle until the radio registers with a base station successfully.

Flexible Control Channel

There are certain rules to configure the frequency distribution of the Fixed Control Channel together.

However, in practice, some trunking users do not have unified or orderly frequency plans, so Fixed

Control Channel is unable to unify the frequency configuration. You can use Flexible TSCC for the

frequency configuration and adopt the Flexible Control Channel plan.

The hunt process of Flexible Control Channel is similar to Short Hunt (see “Short Hunt”), and it only

differs in that the hunted object is Flexible Control Channel rather than Fixed Control Channel.

10.9.2 Hunt for Smooth Communications

The system provides multiple hunt policies for the registered radios to ensure normal communications.

You can select your desired hunt method by accessing the “Hunt” menu from the “Menu”or via the

programmed Hunt Mode key quickly.

You can also enable or disable your desired hunt quickly via the programmable key assigned with the

corresponding hunt feature, such as the Background Hunt feature.

Background Hunt

The idle radio will check the signal strength of the base station with which it registers. If the signal

strength of the base station is below the value defined at Threshold Level, the radio will automatically

hunt for another one with better signal and registers with it. Thus, the radio can always work with a base

station with strong signal.

HomeStation Hunt

The feature offers the radio the priority to register with a frequently used base station. This can balance

the base station load well, especially in the area covered by multiple base stations, increasing system

response speed and improving communication quality.

Each base station has a limited load. When the number of the radios registered with a base station

reaches the upper limit, the system response will be delayed, resulting in intermittent communications.

However, a radio works in a fixed area most of the time. Even though it works on the channel of another

base station in the area covered by multiple base stations, it will jump to work on its home channel once

the signal strength of the channel matches the defined value. The communications will not be affected at

all during base station switch.

Handover

The change in radio position may cause the signal strength received from base station to fluctuate, and

the communication quality is affected accordingly. In case of weak signal strength, this feature enables

the radio to work with another base station having better signals automatically, assuring quality

communications.

10.10 Encrypt

Encrypt indicates the voices transmitted are encrypted between radios. For example, Radio A transmits

the encrypted voice to Radio B, and Radio B should enable Encrypt feature to receive the voice.

Operation: You can enable/disable the Encrypt feature via the programmed Encrypt key or by entering the menu “Menu -> Settings -> Radio Set -> Encrypt”.

10.11 Authentication

Authentication is used to ensure the validity of the user accounts in the network. It operates in a way that

the radio and the base station authenticate the validity of each other. Currently, the authentication is only

needed during registration. Only when both the radio and the base station pass the authentication can

the registration be made.

Operation: You can enable/disable the feature via the “Menu -> Settings -> Radio Set -> Authentication”

menu.

10.12 Covert Mode

When this feature is enabled, the radio will close any visible indications on it, such as the LED, Vibration,

etc, which are set by your dealer. This feature is mainly used in special missions.

Operation: To enable or disable the Covert mode, you can press the programmed Covert Mode key, or

enter the menu “Menu -> Settings -> Radio Set -> Covert Mode”.

10.13 Man Down (optional)

Your radio will sound a pre-alert tone if it is positioned aslant for a preset time period, and will enter the

Emergency mode if you do not place it vertically within such time period. To exit the Emergency mode,

please place it upright.

You can enable or disable the Man Down feature by pressing the programmed Man Down key or via the

menu “Menu -> Settings -> Radio Set -> Man Down”.

The radio gives a high-pitched tone when the Man Down feature is enabled and a low-pitched tone when

the feature is disabled.

10.14 Rent

You can rent the radio from your dealer. . When the rental period expires, you are not allowed to use this

radio.

You can check the remaining rental time via the menu “Menu -> Settings -> Radio Set -> Rent -> Rent

Query”.

If the Rent Pre-Alert feature is enabled, the radio will give a tone periodically to remind you of the

remaining time on your rental.

10.15 Priority

This feature indicates the priority of the normal voice services. When there is no free service channel in

the system, the system will respond to the higher-priority voice service first.

The normal voice services include all calls, such as private call, general group call, broadcast group call,

PSTN call, PABX call, etc, except emergent call.

You can set the priority of your normal voice services via the menu “Menu -> Settings -> Radio Set ->

Priority”.

z The priority follows this principle: Low < Medium < High. When the channels are occupied, the calls

will queue according to their priorities for the system's distribution of channels. When the queue is full,

the higher-priority calls can jump the queue, and, accordingly, the lower-priority calls will be extruded

out (the system will prompt that it is busy). In addition, the emergency calls or preemption calls can

forcibly disconnect the on-going lower-priority calls to release the channels for themselves.

z Preemption: This is the highest priority. When the system is busy, such calls do not need to queue.

They can disconnect other on-going calls with lower priority to release the channels for themselves.

Note: The “Preemption” option will not be available in your radio unless your dealer enables it.

10.16 Radio Set

You can optimize your radio performance via the following configuration according to actual needs and

your preferences.

Enter “Menu -> Settings -> Radio Set” menu to set the items as introduced below:

Power Level

This menu is to set the Tx power level to High or Low. High power can extend the coverage, enabling

you to communicate with farther radios.

Alternatively, you can toggle the power level by pressing the programmed Adjust Power Level key in

the home screen.

On the LCD, High power is indicated by and Low power is indicated by .

Language

This option allows you to set the language in which all interface information is displayed. Currently, this

radio only supports English and Simplified Chinese.

Backlight

This menu allows you to set the backlight. Activating the backlight can illuminate the LCD and the

keypad, so as to facilitate your operation under dim light conditions. The menu has the following options:

z Off: The backlight will always remain off.

z On: The backlight is on all the time.

z Timed: If no operation or signal transmission/receipt occurs within the time preset by the dealer, the

backlight will be turned off automatically.

Brightness

This option allows you to set the display brightness. You can raise or lower it using the Up/Down key.

Keypad Lock

This option allows you to set whether to enable this function. When "Enable" is selected, you can use the

Up/Down key to set the time range after which the keypad will be locked. Available range: 5 – 60

seconds.

LED Indicator

This option allows you to set whether to enable LED indicator. Generally, the LED indicator can indicate

Tx/Rx, Hunt status, Incoming Call, etc. The indications of the LED are set by the dealer.

Tone

You can select the tones on actual requirements.

Tone Description

Radio Silent This feature disables all the tones.

Talk Permit

Private Call The tone given when the radio receives a private call successfully.

TxtMsg The tone given when the radio receives a message.

Keypad The tone given when you are operating the keypad.

Low Battery

Call End Tone The tone given upon a call ending.

Group Call Tone The tone given upon the receipt of a group call.

Incoming Call Tone The tone given upon the receipt of a FOACSU call.

PTT Enable The tone given when the PTT is enabled to transmit the voice.

Hunt Tone The tone given when the radio starts the control channel hunt.

The tone given upon successful signal transmission to prompt the user to

talk.

The tone given when the radio is in low battery status. Then you will need

to replace the battery.

The group number played when you are selecting the group call contacts

Group Notify

Call Queued

by the Group Call Selector knob.

The tone given when the radio is in the call queue, with the prompt “Queue

Call” displayed on the LCD.

10.17 Mode

This feature allows you to select the work mode for the radio. Be prudent about this operation, as the

change of mode will cause your radio to reboot.

Operation: Press the programmed Operation Mode Switch key to switch the mode directly.

You can also press the programmed Operation Mode key to enter “Mode” menu or go to “Menu ->

Mode” for switching.

10.18 GPS

When GPS feature is enabled, you can check the position information of the radio and choose the time

zone for it. Go to “Menu -> Accessories -> GPS”.

10.19 Device Info

With this option, you can view basic information of your radio, including radio ID, serial number, model

name, frequency range, firmware version, radio data version, boot loader version, etc.

Go to “Menu -> Settings -> Device Info”.

10.20 Battery Power Indicator

This feature allows you to know the current battery power.

Hold down the programmed Battery Power Indicator key, and the radio will give a specific indication to

represent the current battery power. Release this key to exit.

Indication Battery Power Icon Battery Power

The LED glows green. High

The LED glows orange. Medium

The LED glows red. Low

The LED glows red and

the low battery tone

sounds.

Insufficient

11. Troubleshooting

Phenomena Analysis Solution

Power-on failure

The radio cannot

register

successfully.

The radio registers

repeatedly.

The battery may be

improperly installed.

The battery may run out. Recharge or replace the battery.

The battery may suffer from

poor contact caused by

dirtied or damaged battery

contacts.

The radio may not detect

signals from the base station.

The radio maybe not be

authorized.

The signal is discontinuous.

Remove the battery and attach it again.

Clean the battery contacts. If the problem can

not be solved, contact your dealer or authorized

service center for inspection and repair.

Make sure you are within the coverage of the

base station.

Contact the base station manager to check

whether your radio is authorized in the network

management system.

Make sure you are within the coverage of the

base station.

The radio cannot

establish a call.

No voice is heard

after a call is

established.

The called party

disconnects

repeatedly during

communication.

During receiving,

the voice is weak,

discontinuous or

totally inactive.

Make sure you are within the coverage of the

The signal is poor.

base station.

Contact the base station manager to check

Your ID may be repeated.

The signal is discontinuous.

Low battery Recharge or replace the battery.

The volume may be set to a

low level.

The antenna may get loose

whether your ID is repeated in the network

management system.

Make sure you are within the coverage of the

base station.

Increase the volume by rotating the Volume Control knob clockwise, or ask your dealer to

disable the Digital Mic AGC feature.

Power off the radio, re-install the antenna and

or improperly installed.

power on the radio again.

Phenomena Analysis Solution

Clean surface of the speaker. If the problem can

The speaker may be blocked

or damaged.

You can not

communicate with

other members.

The voice is

unclear.

The noise is too

loud.

The signal is poor.

You may be at an

unfavorable position. For

example, your

communication may be

blocked by high buildings or

frustrated in the underground

not be solved, contact your dealer or our

authorized service center for inspection and

repair.

Make sure you are within the communication

range.

Make sure you are within the communication

range.

Make sure you are within the communication

range.

Move to an open and flat area, and restart the

radio.

areas.

You may suffer from external

disturbance (such as

electromagnetic

interference).

You can not use

the keys.

The LCD does not

display any

information.

If the above solutions can not fix the problems for you, or you may have some other queries, please

contact us or your local dealer for more technical support.

The keypad may fail to

function temporarily.

The LCD may fail to function

temporarily.

Stay away from equipment that may cause

interference.

Restart the radio.

12. Care and Cleaning

To guarantee optimal performance as well as a long service life of the product, please follow the tips

below.

Product Care

z Do not pierce or scrape the product.

z Keep the product far away from substances that can corrode the circuit.

z Do not hold the product by its antenna or earpiece cable directly.

z Attach the accessory jack cover when the product is not in use.

Product Cleaning

Caution:

on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.

z Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case after

long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil

preparations, so as to avoid surface case damage.

z Make sure the product is completely dry before use.

Power off and remove the battery before cleaning. Clean up the dust and fine particles

13. Appendix

13.1

You can enter aliases, numbers or messages using the keypad. The radio supports these input methods:

Chinese Pinyin (simplified), English and Number.

Input Method

Chinese Pinyin (Simplified)

Step 1

Step 2

Step 3

Step 4

Step 5

You can repeat the above steps to continue.

Press to switch to Chinese Pinyin mode.

Enter the pinyin through alphanumeric keys; then a list of possible combinations and

corresponding characters will appear.

Use the Up/Down key to choose the right pinyin.

Press the OK key to highlight the characters, and choose the right character using the Up/Down key.

Press the OK key to enter the selected character.

English

Step 1

Step 2

You can repeat the above steps to continue.

Press to switch to uppercase English or lowercase English mode.

Press the key which bear your desired letter repeatedly until the letter appears.

Number

Step 1

Step 2

Press to switch to Number mode.

Enter the numbers through alphanumeric keys

to .

Special Character

To enter common punctuations and special characters, press .

To input a space, press .

Note: You can use the Up/Down key to move the cursor leftward/rightward in the entered text.

FCC Statement

Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Note:” Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”

Compliance with RF Exposure Standards

Hytera’s Is Digital Radio

and guidelines:

• United States Federal Communications Commission, Code of Federal Regulations; 47

CFR § 1.1307, 1.1310 and 2.1093

• American National Standards Institute (ANSI) / Institute of Electrical and Electronic

Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015.

• Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

complies with the following RF energy exposure standards

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control your exposure and ensure compliance with the occupational/controlled

environment exposure limits always adhere to the following procedures.

Guidelines:

• Do not remove the RF Exposure Label from the device.

• User awareness instructions should accompany device when transferred to other users.

• Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

• Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50 % of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance).

• Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes.

• When worn on the body, always place the radio in a Hytera’s approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of Hytera’s or other manufacturer’s non-approved accessories may result in exposure levels, which exceed the FCC’s occupational/controlled environment RF exposure limits.

• Use only manufacturer’s name approved supplied or replacement antennas, batteries, and accessories. Use of non-manufactur

accessories may exceed the FCC RF exposure guidelines.

er-name approved antennas, batteries, and

IC statement

The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance

Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement

Hytera Communications PD79XISU1 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual