Hytera Communications PD78XU5 User Manual
Preface
Thank you for purchasing Hytera DMR Digital Portable Radio. As a product built to the DMR standard, it is
endowed with ergonomic design, all-round digital functions and remarkable quality to refresh your
experience and enable you to be responsive to emergent situations.
To derive optimum performance from your product, please read this manual and the supplied Safety
Information Booklet carefully before use.
This manual is applicable to the following model:
PD78X
PD78XG
Instructional Icons
This radio is not intended for use by general population in an uncontrolled environment. It is only for
occupational use and only applied to work-related conditions.
The radio must be only used by users, who are fully aware of the hazards of the exposure and who
are able to exercise control over their RF exposure to qualify for the higher exposure limits.
The following icons are available through this manual:
Alert Icons
Caution: indicates situations that could cause damage to your product.
Note: indicates tips that can help you make better use of your product.
Function Icons
: indicates functions that are available on digital channel only.
: indicates functions that are available on analog channel only.
Functions marked with no function icons are available on both analog and digital channels.
Term Explanation
Key Operation
Short press: to press a key and release it quickly.
Long press: to press a key and remain holding it down for a predefined period (2 seconds by default).
Hold down: to press a key and remain holding it down.
Private Call
Private Call is a call initiated by a single user to another user.
Group Call
Group Ca
All Call
All Call is a call initiated by a single user to all the other users on a channel.
Squelch
This technology can remove ex
PTT ID
ll is a call initiated by a single user to a group.
cessive background noises, improving your communication quality.
1
PTT ID, namely radio identity, allows a radio with display or the control center to identify the calling
party.
Copyright Information
Hytera and HYT are trademarks or registered trademarks of Hytera Communications Co., Ltd. (“Hytera”)
in PRC and/or other countries or areas. Hytera retains the ownership of its trademarks and product
names. All other trademarks and/or product names that may be used in this manual are properties of their
respective owners.
The Hytera product described in this manual may include Hytera computer programs stored in memory or
other media. Laws in PRC and/or other countries or areas protect the exclusive rights of H
respect to its computer programs. The purchase of this product shall not be deemed to grant, either
directly or by implication, any rights to the purchaser with respect to Hytera computer programs. Any
Hytera computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered
in any manner without the prior written consent of Hytera.
TM
The AMBE+2
rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.
This voice coding technology is licensed solely for use within this product. The user of this technology is
explicitly prohibited from
any other way convert the Object Code into a human readable form.
U.S. Patent Nos. #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5
#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and
#5,195,166.
voice coding technology embodied in this product is protected by intellectual property
attempting to decompile, reverse engineer, or disassemble the Object Code or in
,754,974, #5,701,390,
ytera with
Disclaimer
Hytera endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy
or reliability is given. All the specifications and designs are subject to change without prior notice due to
continuous technology development. No part of this manual may be copied, modified, translated, or
distributed in any manner without the express written permission of Hytera.
If you have any suggestions or would like to learn more details, please visit our w
http://www.hytera.cn.
2
ebsite at:
RF Energy Exposure Compliance
Your radio is designed and tested to comply with a number of national and international standards and
guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This
radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure
environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for
occupational use only. In terms of measuring RF energy for compliance with the FCC exposure
guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking in PTT
mode), not when it is receiving (listening) or in standby mode.
The device complies with SAR and/or RF field strength limits of RSS-102 requirement and contact
information where the user can obtain Canadian information on RF exposure and compliance.
The highest reported SAR value are-Head: 2.121W/kg;Body-worn:4.02W/kg.
Your radio complies with the following of RF energy exposure standards and
guidelines
● United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2
sub-part J
● American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)
C95. 1-1992
● Institute of
● International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment RF energy
exposure limits in the above standards and guidelines, users should transmit no more than
50% of the time and always adhere to the following procedures; and should transmit no more than 50% of
the time, although the hardwar
50% in digital mode.
e support transmission up to 100% of the time in analog mode and up to
Transmit and Receive
To transmit (talk), push the Push-To-Talk (PTT) key; to receive, release the PTT key.
3
EU Regulatory Conformance
The equipment is in compliance with the essential requirements and other re
Directive 1999/5/EC.
Note: The above information is applicable to EU countries only.
levant provisions of the
FCC Licensing Information
Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult th
e dealer or an
between the equipme
experienced radio/TV technician for help.
nt and receiver.
FCC Licensing Requirements
A license from Federal Communications Commission is required prior to use. Your dealer will program
each radio with your authorized frequencies, signaling codes, etc., and will be there to meet your
communications needs as your system expands. Contact your dealer for more information.
4
Contents
Checking Items in the Package................................................................................................................. 7
Product Overview ...................................................................................................................................... 8
Product Controls ................................................................................................................................. 8
Programmable Keys ........................................................................................................................... 9
Before Use
Charging the Battery
Assembling t
Status I
LCD Icon........................................................................................................................................... 14
LED Indicator .................................................................................................................................... 15
Basic Operations .....................................................................................................................................
T
rning the Radio On/Off.................................................................................................................. 16
u
Adju
Selecting a Zone
Selecting a Channel.......................................................................................................................... 16
Switching th
Locking/Unlocking the Keyp
Call .......................................................................................................................................................... 18
Private Call
Group Call
.............................................................................................................................................. 11
......................................................................................................................... 11
he Accessories............................................................................................................. 12
ndication ...................................................................................................................................... 14
sting the Volume........................................................................................................................ 16
............................................................................................................................... 16
e Channel Mode ............................................................................................................
ad..........................................................................................................
............................................................................................................................. 18
.............................................................................................................................. 18
16
16
16
All Call
Calls on Analog Channels
Menu Navigation .....................................................................................................................................20
Contact
Message
Call Logs
Scan ................................................................................................................................................. 22
Zone ................................................................................................................................................. 23
Settings............................................................................................................................................. 24
Access
Functions and Operations ....................................................................................................................... 27
Home Screen
Scan
5
ories ......................................................................................................................................
................................................................................................................................................. 27
.................................................................................................................................... 19
...................................................................................................... 19
................................................................................................................................... 20
................................................................................................................................ 21
................................................................................................................................ 22
26
.................................................................................................................................... 27
Talk Around....................................................................................................................................... 28
Monitor
Squelch Off
Emergency........................................................................................................................................ 28
Battery Power Indicator .................................................................................................................... 32
Man Down (optional)......................................................................................................................... 33
Scrambler
Busy Channel Lockout...................................................................................................................... 34
Time-out T
Pseudo Tr
MIC AGC .......................................................................................................................................... 34
Signaling Introduction..............................................................................................................................35
HDC1200.......................................................................................................................................... 35
Troubleshooting....................................................................................................................................... 36
Care and Cleaning ..................................................................................................................................
.................................................................................................................................... 28
........................................................................................................................... 28
/Encrypt .......................................................................................................... 33
imer (TOT) ....................................................................................................................... 34
unking
.................................................................................................................... 34
38
Optional Accessories...............................................................................................................................
Appendix ................................................................................................................................................. 40
Input Method..................................................................................................................................... 40
39
6
Checking Items in the Package
Please unpack carefully and check that all items listed below are received. If any item is missing or
damaged, please contact your dealer.
Battery Charger Power Adapter
Antenna Belt Clip Strap
Owner’s Manual/ Safety Information Booklet/ Quick Reference Guide Radio Unit
Note: The antenna may vary with different frequency bands. And the frequency band is marked on
the label of antenna; if not, please refer to the label on the radio unit for frequency band information.
Three pieces batteries contained in the package: Battery 1:Model:BL2503 DC7.4V 2500mAh/18.5Wh
Battery 2:Model:BL2411-Ex DC7.4V 2400mAh/17.7Wh
Battery 3:Model:BL2006 DC7.4V 2000mAh/14.8Wh
7
Product Overview
Product Controls
No. Part Name No. Part Name
1
○
2
○
3
○
4
○
5
○
6
○
7
○
8
○
11
○
12
○
SK2 (Side Key 2) Radio On-Off/Volume
13
○
14
○
15
○
16
○
17
○
18
○
LED Indicator SK1 (Side Key 1)
Antenna PTT Key
Control Knob
Accessory Jack TK (Top Key)
Back Key Channel Selector Knob
Up Key Microphone
Down Key LCD Display
Battery Latch OK/Menu Key
9
○
10
○
8
Numeric Keypad
19
○
20
○
Belt Clip Speaker
Battery
Programmable Keys
For enhanced convenience, you may request your dealer to program the keys SK1, SK2, TK, and
as shortcuts to the functions listed below:
No. Shortcut Keys Description
1
2
3
4
5
6
7
8
9
10
11
12
Zone Up
To select a desired zone quickly
Zone Down
Keypad Lock To lock or unlock the keypad quickly
Contact List
Message
Call Log
Adjust Power Level To adjust power level quickly
Talk Around To directly communicate with other radios
Monitor
Monitor Momentary
Squelch Off
Squelch Off Momentary
To access the menu “Contact List” quickly
To access the menu “Message” quickly
To access the menu “Call Logs” quickly
To adjust the condition for incoming signal
match
To always unmute the speaker no matter
whether carrier is present or not
To quickly return to the previous menu or
13
14
15
16
17
18
9
Home Screen
home screen
Scan To receive signals on other channels
Nuisance Temporary Delete To temporarily ignore unwanted channel
activity
Emergency To summon help in emergent situations
To temporarily adjust the squelch threshold
Adjust Squelch Level
Battery Power Indicator To indicate the battery strength
required for the radio to unmute
19
Man Down To activate Emergency in the case that the
radio is positioned aslant for a preset time
period due to an unexpected situation
20
Scrambler
/Encrypt
Scrambler: To encrypt your voice so as to
guarantee privacy of your communication
Encrypt: To
so as to guarantee privacy of you
encrypt your voice and message
r
communication
Note:
(1) Long and short press of a key can be assigned with different functions by your dealer
.
(2) The TK is programmed as the Emergency key by default, and is programmable by your dealer
.
10
Before Use
Charging the Battery
Use only the charger and battery specified by Hytera. Charger LED can indicate the charging process.
Charge Diagram
Procedures
1. Connect the power adapter to AC source. See arrow ①.
2. Plug the power adapter into the rear socket of the charger. See arrow ②.
3. Place the radio with the battery attached, or the b
4.
The charging process initiates when LED glows red, and is completed when LED glows green.
Note: To achieve optimal battery performance, please charge the battery for 5 hours before initial
use.
attery alone, into the charger.
Charge Indicator
LED Indicator Charge Status
Red LED flashes slowly. Standby (no load)
Red LED glows. Charging
Orange LED glows. 90% charged
Green LED glows. Fully charged
Red LED flashes rapidly. Failure
11
Caution: Be sure to read the Safety Information Booklet, to get necessary safety information.
Assembling the Accessories
Attaching the Antenna
Turn the antenna clockwise to fasten it.
To remove the antenna, rotate it counter-clockwise.
Attaching the Battery
1. Insert the battery into top of the radio. See arrow ○1.
2. Slightly press the bottom of the battery until a click is heard. See arrow
To remove the battery, turn off the radio first. Then slide the battery latch upwards to unlock the battery.
2.
○
Attaching the Belt Clip
1. Remove the screws.
2. Align the screw holes on the belt clip with those on the radio’s body, and then tighten the screws.
To remove the belt clip, loosen the screws.
12
Loading...