Hytera Communications PD78XGU5H, PD78XGU5 User Manual

Preface

Thank you for purchasing Hytera DMR Digital Portable Radio. As a product built to the DMR standard, it is

endowed with ergonomic design, all-round digital functions and remarkable quality to refresh your

experience and enable you to be responsive to emergent situations.

To derive optimum performance from your product, please read this manual and the supplied Safety

Information Booklet carefully before use.

This manual is applicable to the following model:

PD78X

PD78XG

Instructional Icons

This radio is not intended for use by general population in an uncontrolled environment. It is only for

occupational use and only applied to work-related conditions.

The radio must be only used by users, who are fully aware of the hazards of the exposure and who

are able to exercise control over their RF exposure to qualify for the higher exposure limits.

The following icons are available through this manual:

Alert Icons

Caution: indicates situations that could cause damage to your product.

Note: indicates tips that can help you make better use of your product.

Function Icons

: indicates functions that are available on digital channel only.

: indicates functions that are available on analog channel only.

Functions marked with no function icons are available on both analog and digital channels.

Term Explanation

Key Operation

Short press: to press a key and release it quickly.

Long press: to press a key and remain holding it down for a predefined period (2 seconds by default).

Hold down: to press a key and remain holding it down.

Private Call

Private Call is a call initiated by a single user to another user.

Group Call

Group Call is a call initiated by a single user to a group.

All Call

All Call is a call initiated by a single user to all the other users on a channel.

Squelch

This technology can remove excessive background noises, improving your communication quality.

PTT ID

PTT ID, namely radio identity, allows a radio with display or the control center to identify the calling

party.

Hytera and HYT are trademarks or registered trademarks of Hytera Communications Co., Ltd. (“Hytera”)

in PRC and/or other countries or areas. Hytera retains the ownership of its trademarks and product

names. All other trademarks and/or product names that may be used in this manual are properties of their

respective owners.

The Hytera product described in this manual may include Hytera computer programs stored in memory or

other media. Laws in PRC and/or other countries or areas protect the exclusive rights of Hytera with

respect to its computer programs. The purchase of this product shall not be deemed to grant, either

directly or by implication, any rights to the purchaser with respect to Hytera computer programs. Any

Hytera computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered

in any manner without the prior written consent of Hytera.

The AMBE+2

rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.

This voice coding technology is licensed solely for use within this product. The user of this technology is

explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code or in

any other way convert the Object Code into a human readable form.

U.S. Patent Nos. #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5,754,974, #5,701,390,

#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and

#5,195,166.

voice coding technology embodied in this product is protected by intellectual property

Disclaimer

Hytera endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy

or reliability is given. All the specifications and designs are subject to change without prior notice due to

continuous technology development. No part of this manual may be copied, modified, translated, or

distributed in any manner without the express written permission of Hytera.

If you have any suggestions or would like to learn more details, please visit our website at:

http://www.hytera.cn.

RF Energy Exposure Compliance

Your radio is designed and tested to comply with a number of national and international standards and

guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This

radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure

environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for

occupational use only. In terms of measuring RF energy for compliance with the FCC exposure

guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking in PTT

mode), not when it is receiving (listening) or in standby mode.

The device complies with SAR and/or RF field strength limits of RSS-102 requirement and contact

information where the user can obtain Canadian information on RF exposure and compliance.

Your radio complies with the following of RF energy exposure standards and guidelines

● United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2

sub-part J

● American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)

C95. 1-1992

● Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition

● International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998



Operational Instructions and Training Guidelines

To ensure optimal performance and compliance with the occupational/controlled environment RF energy

exposure limits in the above standards and guidelines, users should transmit no more than

50% of the time and always adhere to the following procedures; and should transmit no more than 50% of

the time, although the hardware support transmission up to 100% of the time in analog mode and up to

50% in digital mode.

The radio may use Chest Pack(LCBN13) as optional assessory, The chest Pack provide an extra protection to the

operator under RF exposure due to special measures taken during design and manufacturing process. Chest Pack

is designed

and operator's body. The operator should follow Chest Pack usage instruction to ensure compliance with RF

energy exposure limits.

to allow the radio only stick to it with belt-clip.the belt-clip will provide necessary distance between antenna

Transmit and Receive

To transmit (talk), push the Push-To-Talk (PTT) key; to receive, release the PTT key.

EU Regulatory Conformance

The equipment is in compliance with the essential requirements and other relevant provisions of the

Directive 1999/5/EC.

Note: The above information is applicable to EU countries only.

FCC Licensing Information

Part 15 Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

FCC Licensing Requirements

A license from Federal Communications Commission is required prior to use. Your dealer will program

each radio with your authorized frequencies, signaling codes, etc., and will be there to meet your

communications needs as your system expands. Contact your dealer for more information.

Contents

Checking Items in the Package................................................................................................................. 7

Product Overview ...................................................................................................................................... 8

Product Controls ................................................................................................................................. 8

Programmable Keys ........................................................................................................................... 9

Before Use .............................................................................................................................................. 11

Charging the Battery......................................................................................................................... 11

Assembling the Accessories............................................................................................................. 12

Status Indication...................................................................................................................................... 14

LCD Icon........................................................................................................................................... 14

LED Indicator .................................................................................................................................... 15

Basic Operations ..................................................................................................................................... 16

Turning the Radio On/Off.................................................................................................................. 16

Adjusting the Volume ........................................................................................................................ 16

Selecting a Zone............................................................................................................................... 16

Selecting a Channel.......................................................................................................................... 16

Switching the Channel Mode ............................................................................................................ 16

Locking/Unlocking the Keypad.......................................................................................................... 16

Call .......................................................................................................................................................... 18

Private Call

Group Call

All Call

Calls on Analog Channels

Menu Navigation .....................................................................................................................................20

Contact

Message

Call Logs

Scan ................................................................................................................................................. 22

Zone ................................................................................................................................................. 23

Settings............................................................................................................................................. 24

Accessories ...................................................................................................................................... 26

............................................................................................................................. 18

.............................................................................................................................. 18

.................................................................................................................................... 19

...................................................................................................... 19

................................................................................................................................... 20

................................................................................................................................ 21

................................................................................................................................ 22

Functions and Operations ....................................................................................................................... 27

Home Screen.................................................................................................................................... 27

Scan ................................................................................................................................................. 27

Talk Around....................................................................................................................................... 28

Monitor

Squelch Off

Emergency........................................................................................................................................ 28

Battery Power Indicator .................................................................................................................... 32

Man Down (optional)......................................................................................................................... 33

Scrambler

Busy Channel Lockout...................................................................................................................... 34

Time-out Timer (TOT) ....................................................................................................................... 34

Pseudo Trunking

MIC AGC .......................................................................................................................................... 34

Signaling Introduction..............................................................................................................................35

HDC1200.......................................................................................................................................... 35

Troubleshooting....................................................................................................................................... 36

Care and Cleaning ..................................................................................................................................38

.................................................................................................................................... 28

........................................................................................................................... 28

/Encrypt .......................................................................................................... 33

.................................................................................................................... 34

Optional Accessories............................................................................................................................... 39

Appendix ................................................................................................................................................. 40

Input Method..................................................................................................................................... 40

Checking Items in the Package

Please unpack carefully and check that all items listed below are received. If any item is missing or

damaged, please contact your dealer.

Battery Charger Power Adapter

Antenna Belt Clip Strap

Owner’s Manual/ Safety Information Booklet/ Quick Reference Guide Radio Unit

Note: The antenna may vary with different frequency bands. And the frequency band is marked on

the label of antenna; if not, please refer to the label on the radio unit for frequency band information.

Product Overview

Product Controls

No. Part Name No. Part Name

○

SK1 (Side Key 1)

PTT Key

SK2 (Side Key 2)

TK (Top Key)

Microphone

LCD Display

OK/Menu Key

○

LED Indicator

Antenna

Radio On-Off/Volume

Control Knob

Accessory Jack

Back Key Channel Selector Knob

Up Key

Down Key

Battery Latch

○

Speaker

Numeric Keypad

○

Belt Clip

Battery

Programmable Keys

For enhanced convenience, you may request your dealer to program the keys SK1, SK2, TK, and

as shortcuts to the functions listed below:

No. Shortcut Keys Description

Zone Up

To select a desired zone quickly

Zone Down

Keypad Lock To lock or unlock the keypad quickly

Contact List

Message

Call Log Adjust Power Level To adjust power level quickly

Talk Around To directly communicate with other radios

Monitor

Monitor Momentary

Squelch Off

Squelch Off Momentary

To access the menu “Contact List” quickly

To access the menu “Message” quickly

To access the menu “Call Logs” quickly

To adjust the condition for incoming signal

match

To always unmute the speaker no matter

whether carrier is present or not

To quickly return to the previous menu or

Home Screen

home screen

Scan To receive signals on other channels

Nuisance Temporary Delete To temporarily ignore unwanted channel

activity

Emergency To summon help in emergent situations

To temporarily adjust the squelch threshold

Adjust Squelch Level

Battery Power Indicator To indicate the battery strength

required for the radio to unmute

Man Down To activate Emergency in the case that the

radio is positioned aslant for a preset time

period due to an unexpected situation

Scrambler

/Encrypt

Scrambler: To encrypt your voice so as to

guarantee privacy of your communication

Encrypt: To encrypt your voice and message

so as to guarantee privacy of your

communication

Note:

(1) Long and short press of a key can be assigned with different functions by your dealer. (2) The TK is programmed as the Emergency key by default, and is programmable by your dealer.

Before Use

Charging the Battery

Use only the charger and battery specified by Hytera. Charger LED can indicate the charging process.

Charge Diagram

Procedures

1. Connect the power adapter to AC source. See arrow ①.

2. Plug the power adapter into the rear socket of the charger. See arrow ②.

3. Place the radio with the battery attached, or the battery alone, into the charger.

4. The charging process initiates when LED glows red, and is completed when LED glows green.

Note: To achieve optimal battery performance, please charge the battery for 5 hours before initial

use.

Charge Indicator

LED Indicator Charge Status

Red LED flashes slowly. Standby (no load)

Red LED glows. Charging

Orange LED glows. 90% charged

Green LED glows. Fully charged

Red LED flashes rapidly. Failure

Caution: Be sure to read the Safety Information Booklet, to get necessary safety information.

Assembling the Accessories

Attaching the Antenna

Turn the antenna clockwise to fasten it.

To remove the antenna, rotate it counter-clockwise.

Attaching the Battery

1. Insert the battery into top of the radio. See arrow ○1.

2. Slightly press the bottom of the battery until a click is heard. See arrow

To remove the battery, turn off the radio first. Then slide the battery latch upwards to unlock the battery.

○

Attaching the Belt Clip

1. Remove the screws.

2. Align the screw holes on the belt clip with those on the radio’s body, and then tighten the screws.

To remove the belt clip, loosen the screws.

+ 30 hidden pages