Hytera Communications PD50XIU1 User Manual

Preface

Thank you for purchasing Hytera DMR Digital Portable Radio. As a product built to the DMR standard, it is

endowed with ergonomic design, all-round digital functions and remarkable quality to refresh your

experience and enable you to be responsive to emergent situations.

To derive optimum performance from your product, please read this manual and the supplied Safety

Information Booklet carefully before use.

This manual is applicable to the following model:

PD50Xi Digital Portable Radio (X may represent 2, 5, 6 or 8)

Instructional Icons

The following icons are available through this manual:

Alert Icons

Function Icons

Functions marked with no function icons are available on both analog and digital channels.

Caution: indicates situations that could cause damage to your product.

Note: indicates tips that can help you make better use of your product.

: indicates functions that are available on digital channel only.

: indicates functions that are available on analog channel only.

Term Explanation

Key Operation

Short press: to press a key and release it quickly.

Long press: to press a key and remain holding it down for a predefined period (2 seconds by default).

Hold down: to press a key and remain holding it down.

Private Call

Private Cal is a call initiated by a single user to another user.

Group Call

Group Call is a call initiated by a single user to a group.

All Call

All Call is a call initiated by a single user to all the other users on a channel.

Squelch

This technology can remove excessive background noises, improving your communication quality.

1

Copyright Information

Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in

the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its

trademarks and product names. All other trademarks and/or product names that may be used in this manual are

properties of their respective owners.

The product described in this manual may include the Company's computer programs stored in memory or other

media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its

computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication,

any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may

not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written

consent of the Company.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or

reliability is given. All the specifications and designs are subject to change without notice due to continuous

technological development. No part of this manual may be copied, modified, translated, or distributed in any

manner without the prior written consent of the Company.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of

the third-party products and contents involved in this manual.

If you have any suggestions or would like to receive more information, please visit our website at:

http://www.hytera.com.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used

in accordance with the instructions, it may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. Verification of harmful interference by this

equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged

to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.

 Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

2

Compliance with RF Exposure Standards

Hytera's radio complies with the following RF energy exposure standards and guidelines:

 United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310

and 2.1093

 American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE)

C95. 1:2005; Canada RSS102 Issue 5 March 2015

 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

RF Exposure Compliance and Control Guidelines and Operating

Instructions

To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,

always adhere to the following procedures.

Guidelines:

 Do not remove the RF Exposure Label from the device.

 User awareness instructions should accompany device when transferred to other users.

 Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

 Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT)

key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio

generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).

 Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as

RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and eyes.

 When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or by

use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which

exceed the FCC's occupational/controlled environmental RF exposure limits.

 Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure

guidelines.

Contact your local dealer for the optional accessories of the product.

3

EU

Regulatory Conformance

As certified by the qualified laboratory, the product is in compliance with the essential requirements and other

relevant provisions of the following directives: 2014/53/EU, 2006/66/EC, 2011/65/EU, and 2012/19/EU.

Please note that the above information is applicable to EU countries only.

4

Checking Items in the Package

Please unpack carefully and check that all items listed below are received. If any item is missing or

damaged, please contact your dealer.

Battery Charger Power Adapter

Antenna Belt Clip Strap

Radio Unit CD

Owner’s Manual/ Safety Information Booklet/ Quick Reference Guide

Note: The antenna may vary with different frequency bands. And the frequency band is marked on

the label of antenna; if not, please refer to the label on the radio unit for frequency band information.

5

Product Overview

PD50Xi Product Controls

NO. PART NAME NO. PART NAME

1 PTT KEY

○

2 SK1(Side KEY)

○

3 Channel Selector Knob

○

4 Speaker

○

5 LED Indicator

○

6 Radio On-Off/ Volume Control Knob

○

6

7 Accessory Jack

○

8 Microphone

○

9 Battery Latch

○

10 Antenna

○

11 Belt Clip

○

12 Battery

○