Hytera Communications BD51XVHF User Manual

Preface

Thanks for your favor in our product. This manual provides guidance for you to use the product. To avoid

body injury or property loss caused by misoperation, please carefully read the Safety Information

Booklet before using the product.

This manual is applicable to the following product:

BD5 Digital Portable Radio

1X

Copyright Information

Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the

Company) in PRC and/or other countries or areas. The Company retains the ownership of its trademarks

and product names. All other trademarks and/or product names that may be used in this manual are

properties of their respective owners.

The product described in this manual may include the Company's computer programs stored in memory

or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company

with respect to its computer programs. The purchase of this product shall not be deemed to grant, either

directly or by implication, any rights to the purchaser regarding the Company's computer programs. Any

of the Company's computer programs may not be copied, modified, distributed, decompiled, or

reverse-engineered in any manner without the prior written consent of the Company.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of

accuracy or reliability is given. All the specifications and designs are subject to change without notice

due to continuous technology development. No part of this manual may be copied, modified, translated,

or distributed in any manner without the prior written consent of the Company.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or

completeness of the Third Party products and contents involved in this manual.

If you have any suggestions or would like to learn more details, please visit our website at:

http://www.hytera.com.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct.

The interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions: 1. This device may not cause harmful interference,

and 2. This device must accept any interference received, including interference that may cause

undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Compliance with RF Exposure Standards

Hytera's portable radio complies with the following RF energy exposure standards and guidelines:

 United States Federal Communications Commission, Code of Federal Regulations; 47 CFR

§ 1.1307, 1.1310 and 2.1093

 American National Standards Institute (ANSI) / Institute of Electrical and Electronic

Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015.

 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control your exposure and ensure compliance with the occupational/controlled environment

exposure limits always adhere to the following procedures.

Guidelines:

 Do not remove the RF Exposure Label from the device.

 User awareness instructions should accompany device when transferred to other users.

 Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

 Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the

Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of

the time, or less, is important because this radio generates measurable RF energy

exposure only when transmitting (in terms of measuring for standards compliance).

 Hold the radio in a vertical position in front of face with the microphone (and the other parts

of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping

the radio at the proper distance is important because RF exposures decrease with distance

from the antenna. Antenna should be kept away from eyes.

 When worn on the body, always place the radio in a Hytera's approved clip, holder, holster,

case, or body harness for this product. Using approved body-worn accessories is important

because the use of Hytera's or other manufacturer's non-approved accessories may result

in exposure levels, which exceed the FCC's occupational/controlled environment RF

exposure limits.

 If you are not using a body-worn accessory and are not using the radio in the intended use

position in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm

(one inch) from the body when transmitting. Keeping the radio at the proper distance is

important because RF exposures decrease with increasing distance from the antenna.

 Use only manufacturer's name approved supplied or replacement antennas, batteries, and

accessories. Use of non-manufacturer-name approved antennas, batteries, and

accessories may exceed the FCC RF exposure guidelines.

 Contact your local dealer for the optional accessories of the product .

ISEDC

The device has been tested and compliance with SAR limits, users can obtain Canadian information on

RF exposure and compliance

Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF,

les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir

les informations correspondantes

This device complies w

Opera

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire

ouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

br

brouillage est susceptible d'en compromettre le fonctionnement

Statement

tion is subject to the

Innovation, Science and Economic Development Canada

following two conditions:

CNR d'ISEDC applicables aux

appareils radio exempts

RSSith

standa

de

d

r (

de licence.

EU Regulatory Conformance

As certified by the qualified laboratory, the product is in compliance with the essential requirements and

other relevant provisions of the following directives:

 1999/5/EC or 2014/53/EU

 2006/66/EC

 2011/65/EU

 2012/19/EU

Please note that the above information is applicable to EU countries only.

1. Items in the Package

Please unpack carefully and check if all items listed below are received. If any item is missing or

damaged, please contact your dealer.

Item Quantity (PCS) Item Quantity (PCS)

Radio 1 Antenna 1

Battery 1 Belt Clip 1

Charger 1 Strap 1

Power Adapter 1 Documentation Kit 1

Note

The frequency band is marked on the label of antenna; if it is unavailable there, see the label on the

radio.

1