Hytera Communications BD50XIVHF User Manual

Preface

Welcome to the world of Hytera and thank you for purchasing this product. This manual includes a description of

the functions and step-by-step procedures for use. It also includes a troubleshooting guide.

To avoid bodily injury or property loss caused by incorrect operation, please carefully read the Safety Information

Booklet before use.

This manual is applicable to the following product:

50X

BD i Digital Portable Radio.

(X may represent2, 5, 6, 8)

Copyright Information

Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company)

in People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its

trademarks and product names. All other trademarks and/or product names that may be used in this manual are

properties of their respective owners.

The product described in this manual may include the Company's computer programs stored in memory or other

media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its

computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication,

any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may

not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written

consent of the Company.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or

reliability is given. All the specifications and designs are subject to change without notice due to continuous

technology development. No part of this manual may be copied, modified, translated, or distributed in any manner

without the prior written consent of the Company.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of

the Third Party products and contents involved in this manual.

If you have any suggestions or would like to receive more information, please visit our website at:

http://www.hytera.com.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in

accordance with the instructions, it may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. Verification of harmful interference by this

equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to

try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.

 Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

 This device may not cause harmful interference., and

 This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Compliance with RF Exposure Standards

Hytera's radio complies with the following RF energy exposure standards and guidelines:

 United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310

and 2.1093

 American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers

(IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015

 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,

always adhere to the following procedures.

Guidelines:

 Do not remove the RF Exposure Label from the device.

 User awareness instructions should accompany device when transferred to other users.

 Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

 Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT)

key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio

generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).

 Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as

RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and

eyes.

 When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or

by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which

exceed the FCC's occupational/controlled environmental RF exposure limits.

 Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure

guidelines.

 Contact your local dealer for the optional accessories of the product.

1. Items in the Package

Please unpack carefully and check if all items listed below are received. If any item is missing or damaged, please

contact your dealer.

Item Quantity (PCS) Item Quantity (PCS)

Radio 1 Antenna 2

Battery 1 Belt Clip 1

Charger 1 Strap 1

Power Adapter 1 Documentation Kit 1

1