Hytera RD62, RD625, RD626, RD622, RD628 User Manual

Preface

Thanks for your favor in our product. To derive optimum perf ormance from the product, please read this
manual and the Safety Information Booklet carefully before use.

This manual is applicable to the following product:
RD62X Repeater(X may represent 2, 5, 6 or 8)

Instructional Icons

Caution: Indicates situations that could cause damage to your product or bodily injury.

Note: Indicates tips that can help you make better use of your product.

Term Explanation

Voltage Standing Wave Ratio (VSWR)

Voltage Standing Wave Ratio (VSWR) is a value that m easures how well a load is impedance-matched
to a source.

Copyright Information

Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the
Company) in PRC and/or other countries or areas. The Company retains the ownership of its trademarks
and product names. All other trademarks and/ or product names that may be used in this manual are
properties of their respective owners.

The product described in this manual may include the Company’s computer programs stored in memory
or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company
with respect to its computer programs. The purchase of t his product shall not be deemed to grant, either
directly or by implication, any rights to the purchaser regarding the Company’s computer programs. Any
of the Company’s computer programs may not be copied, modi fied, distributed, decompiled, or
reverse-engineered in any manner without the prior written consent of the Company.

The AMBE+2TM voice coding technology embodied in this product is protected by intellectual property
rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice
coding technology is licensed solely for use within this product. The user of this technology is explicit ly
prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code or in any
other way convert the Object Code into a human-readable format.

U.S. Patent No: #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,65 6, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and
#5,195,166.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of
accuracy or reliability is given. All the specifications and designs are subject to change without notic e
due to continuous technology development. No par t of this manual may be copied, modified, translated,
or distributed in any manner without the express wri tten permission of us.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or
completeness of the Third Party products and contents involved in this manual.

If you have any suggestions or would like to learn more details, please visit our website at:

http://www.hytera.com.

RF Radiation Information

This product must be restricted to operati ons in an Occupational/Controlled RF exposure Environments.
Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure
to qualify for the higher exposure limits.

RF Radiation Profile

Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are
transmitted. RF technology is widely used in communication, medicine, food processing and other fields.
It may generate radiation during use.

RF Radiation Safety

In order to ensure user health, experts from relevant i ndustries including science, engineering, medicine
and health work with international organizati ons to develop standards for safe exposure to RF radiation.
These standards consist of:

 United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2

sub-part J;

 American National Standards Institute (ANSI)/Institute of Electrical and Electronic E ngineers (IEEE)

C95. 1-1992;

 Institute of Electrical and Electronic Enginee rs (IEEE) C95.1-1999;
 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.

FCC Regulations

Federal Communication Commission (FCC) requires that all radio communication products should meet
the requirements set forth in the above standards before they can be marketed in the U.S, and the
manufacturer shall post a RF label on the product to inf orm users of operational instructions, so as to
enhance their occupational health against exposure to RF energy.

EU Regulatory Conformance

As certified by the qualified laboratory, the produc t is in compliance with the essential requirements and
other relevant provisions of the Directive 1999/5/EC. Please note that the above information is applicable
to EU countries only.

Contents

1. Items in the Package ............................................................................................................................ 1

2. Product Overview ................................................................................................................................. 2

2.1 Parts ................................................................................................................................................. 2

2.2 Front Panel ....................................................................................................................................... 3

2.3 Rear Panel ........................................................................................................................................ 4

3. Before Use ............................................................................................................................................ 5

3.1 Instructions ....................................................................................................................................... 5

3.2 Wall-mount Bracket Installation (Optional) ........................................................................................ 5

4. Status Indication .................................................................................................................................. 8

5. Alarm Information ................................................................................................................................ 9

6. Troubleshooting ................................................................................................................................. 10

7. Care and Cleaning .............................................................................................................................. 12

8. Optional Accessories ......................................................................................................................... 13

1

1. Items in the Package

Please unpack carefully and check that all items listed below are received. If any item is missing or
damaged, please contact your dealer.

Repeater AC Power Cord

Documentation Kit