Hytera PT350 User Manual

QQUUIICCK RK REEFFEERREENNCCE GE GUUIIDDEE

PT350 PORTABLE TERMINAL

is the trademark or registered trademark of Hytera Communications Corporation Limited.

2018 Hytera Communications Corporation Limited. All Rights Reserved.

Add ress: H ytera Tow er, Hi-Tec h Indus trial P ark Nor th, 910 8# Beih uan Roa d, Nans han Dis trict , Shenz hen, Pe ople' s Repub lic of Ch ina
Pos tcode : 51805 7
htt p:// ww w.hyte ra.co m

Copyright Information

Hytera is the trademark or registered trademark of Hytera
Communications Corporation Limited (the Company) in the
People's Republic of China (PRC) and/or other countries or
areas. The Company retains the ownership of its trademarks
and product names. All other trademarks and/or product
names that may be used in this manual are properties of their
respective owners.

The product described in this manual may include the
Company's computer programs stored in memory or other
media. Laws in PRC and/or other countries or areas protect
the exclusive rights of the Company with respect to its
computer programs. The purchase of this product shall not be
deemed to grant, either directly or by implication, any rights
to the purchaser regarding the Company's computer programs.
The Company's computer programs may not be copied,
modified, distributed, decompiled, or reverse-engineered in
any manner without the prior written consent of the Company.

Disclaimer

The Company endeavors to achieve the accuracy and
completeness of this manual, but no warranty of accuracy or
reliability is given. All the specifications and designs are
subject to change without notice due to continuous
technological development. No part of this manual may be

copied, modified, translated, or distributed in any manner
without the prior written consent of the Company.

We do not guarantee, for any particular purpose, the accuracy,
validity, timeliness, legitimacy or completeness of the
third-party products and contents involved in this manual.

If you have any suggestions or would like to receive more
information, please visit our website at:

http://www.hytera.com.

FCC Statement

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates and can radiate radio
frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
Verification of harmful interference by this equipment to
radio or television reception can be determined by turning it
off and then on. The user is encouraged to try to correct the
interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the

separation between the equipment and receiver.

 Connect the equipment into an outlet on a different

circuit to that of the receiver's outlet.

 Consult the dealer or an experienced radio/TV technician

for help.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.
 This device must accept any interference received,

including interference that may cause undesired
operation.

Note: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.

RF Energy Exposure
Awareness and Control
Information and Operational
Instructions for Occupational

Use

NOTICE: This radio is intended for use in

occupational/controlled conditions where
users have full knowledge of their exposure
and can exercise control over their exposure to
meet the occupational limits in FCC and
International standards. This radio device is
NOT authorized for general population
consumer use.

This radio uses electromagnetic energy in the radio
frequency (RF) spectrum to provide communications
between two or more users over a distance. It uses radio
frequency (RF) energy or radio waves to send and receive
calls. RF energy is one form of electromagnetic energy.
Other forms include, but are not limited to, sunlight and
x-rays. RF energy, however, should not be confused with
these other forms of electromagnetic energy, which when
used improperly, can cause biological damage. Very high
levels of x-rays, for example, can damage tissues and genetic
material.

Experts in science, engineering, medicine, health, and
industry work with organizations to develop standards for
safe exposure to RF energy. These standards provide
recommended levels of RF exposure for both workers and
the general public. These recommended RF exposure levels
include substantial margins of protection.

All Hytera radios are designed, manufactured, and tested to
ensure they meet government-established RF exposure levels.
In addition, manufacturers also recommend specific
operating instructions to users of radios. These instructions
are important because they inform users about RF energy
exposure and provide simple procedures on how to control it.

Please refer to the following websites for more information
on what RF energy exposure is and how to control your
exposure to assure compliance with established RF exposure

limits:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

Compliance with RF Exposure
Standards

Hytera's radio complies with the following RF energy
exposure standards and guidelines:

 United States Federal Communications Commission,

Code of Federal Regulations; 47 CFR § 1.1307, 1.1310
and 2.1093

 American National Standards Institute (ANSI) /

Institute of Electrical and Electronic Engineers
(IEEE) C95. 1:2005; Canada RSS102 Issue 5
March 2015

 Institute of Electrical and Electronic Engineers (IEEE)

C95.1:2005 Edition

RF Exposure Compliance and
Control Guidelines and

Operating

Instructions

To control your exposure and ensure compliance with the
occupational/controlled environmental exposure limits,
always adhere to the following procedures.

Guidelines:

 Do not remove the RF Exposure Label from the device.
 User awareness instructions should accompany device

when transferred to other users.

 Do not use this device if the operational requirements

described herein are not met.

Operating Instructions:

 Transmit no more than the rated duty factor of 50% of the

time. To transmit (talk), push the Push-To-Talk (PTT)

key. To receive calls, release the PTT key. Transmitting
50% of the time, or less, is important because the radio
generates measurable RF energy only when transmitting
(in terms of measuring for standards compliance).

 Keep the radio unit at least 2.5 cm away from the face.

Keeping the radio at the proper distance is important as
RF exposure decreases with distance from the antenna.
The antenna should be kept away from the face and eyes.

 When worn on the body, always place the radio in a

Hytera-approved holder, holster, case, or body harness or
by use of the correct clip for this product. Use of
non-approved accessories may result in exposure levels
which exceed the FCC's occupational/controlled
environmental RF exposure limits.

 Use of non-approved antennas, batteries, and accessories

causes the radio to exceed the FCC RF exposure
guidelines.

 Contact your local dealer for the optional accessories of

the product.

ISEDC Statement

The device has been tested and complies with SAR limits,
users can obtain Canadian information on RF exposure and
compliance

Après examen de ce matériel aux conformité aux limites DAS
et/ou aux limites d’intensité de champ RF, les utilisateurs
peuvent sur l’exposition aux radiofréquences et la conformité
and compliance d’acquérir les informations correspondantes

This device complies with Innovation, Science and Economic
Development Canada Compliance license-exempt RSS
standard(s). Operation is subject to the following two
conditions:

 This device may not cause harmful interference.
 This device must accept any interference received,

including interference that may cause undesired
operation.

Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioéle ctriqu e subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement

EU

Regulatory Conformance

As certified by the qualified laboratory, the product is in
compliance with the essential requirements and other relevant
provisions of the following directives: 2014/53/EU,
2006/66/EC, 2011/65/EU, and 2012/19/EU.

Please note that the above information is applicable to EU
countries only.