Hytera PD78X Front Panel Programming

Front Panel Programming

For PD78X

NOTE: Terminals capable of programing the front panel are the PD78X and X1p with rmware v5.05 and above.

1. To program the front keypad for frequency, the Terminal must be licensed for wide-band RX/TX. In the feature control menu the Only Narrow
Band box should be unchecked. If this box is checked you will need to contact [e-mail] for information on licensing this feature.
See FIG 1.

FIG 1

2. Once you have determined that your terminal is not restricted to Only Narrow Band, you can use the CPS to select specic items to add to the
terminal menu for Front Panel Programming.

If you are still having trouble
with this please contact:

Email: [e-mail]

PD78X FrontPanelProgramming 090914

Hytera America

Address: 3315 Commerce Parkway

Miramar, Florida 33025, USA

Tel: [phone] Fax: [phone]
http: //www.hytera.us

Front Panel Programming

Menu Menu

Select BackSelect Back

Select DeleteSelect Delete

Select BackSelect Back

Select DeleteSelect Delete

Select BackSelect Back

Select DeleteSelect Delete

Select BackSelect Back

Select DeleteSelect Delete

For PD78X

NOTE: Once Front Panel Programming is enabled it cannot be restricted. We do not advise that this is left enabled for your general users. It should be

reserved for technicians who need to use the radio as a test instrument during troubleshooting and that require the ability to modify channel data
on the y.

Changing Frequency

1. Select zone and channel
you wish to modify. For this
example, we have selected
a digital channel. Press the
Menu button to show the
Main Menu.

2. Using the round rocker
button on the center of the
Terminal, press the down
position and scroll all the
way down to Programming.

3. You have two choices,
Channel and Radio. For the
Radio Option, you can use
this to change your Radio’s
digital ID. For this example,
we will select the Channel
option.

4. These are the settings
you can modify under the
current Channel. For this
example, we will show you
the Frequency modication.

5. Press the Delete key to
remove digits, then enter
the frequency desired on
the keypad. Press the down
button in the center of the
keypad and repeat for the
RX Frequency. Press Select
when nished.

Changing Slot

1. Using the round rocker
button on the center of the
Terminal, press the down
position and scroll all the
way down to Programming.

2. You have two choices,
Channel and Radio. For the
Radio Option, you can use
this to change your Radio’s
digital ID. For this example,
we will select the Channel
option.

3. These are the settings
you can modify under the
current Channel. For this
example, we will show you
the Slot modication.

4. For Slot, you can select
Slot 1, Slot 2 or Pseudo
Trunking mode.

If you are still having trouble
with this please contact:

Email: [e-mail]

PD78X FrontPanelProgramming 090914

Hytera America

Address: 3315 Commerce Parkway

Miramar, Florida 33025, USA

Tel: [phone] Fax: [phone]
http: //www.hytera.us

Front Panel Programming

Select BackSelect Back

Select DeleteSelect Delete

Select BackSelect Back

Select DeleteSelect Delete

Select BackSelect Back

Select DeleteSelect Delete

Select BackSelect Back

Select BackSelect Back

Select DeleteSelect Delete

Select DeleteSelect Delete

For PD78X

Color Code

1. Using the round rocker
button on the center of the
Terminal, press the down
position and scroll all the
way down to Programming.

2. You have two choices,
Channel and Radio. For the
Radio Option, you can use
this to change your Radio’s
digital ID. For this example,
we will select the Channel
option.

3. These are the settings
you can modify under the
current Channel. For this ex­ample, we will show you the
Color Code modication

4.Enter the Color Code for
this Digital Channel.

Channel

1. Using the round rocker
button on the center of the
Terminal, press the down
position and scroll all the
way down to Programming.

RX CTCSS/CDCSS

1. Using the round rocker
button on the center of the
Terminal, press the down
position and scroll all the
way down to Programming.

2. You have two choices,
Channel and Radio. For the
Radio Option, you can use
this to change your Radio’s
digital ID. For this example,
we will select the Channel
option

2. You have two choices,
Channel and Radio. For the
Radio Option, you can use
this to change your Radio’s
digital ID. For this example,
we will select the Channel
option

3. You can select your
Rx Group List from the
available lists you have
create.

3. For Analog channels, you
can modify Frequency and
CTCSS/CDCSS Tones

If you are still having trouble
with this please contact:

Email: [e-mail]

PD78X FrontPanelProgramming 090914

Hytera America

Address: 3315 Commerce Parkway

Miramar, Florida 33025, USA

Tel: [phone] Fax: [phone]
http: //www.hytera.us

Front Panel Programming

For PD78X

3. Once your test zone and dummy channels are setup, you can use these for on the y programming and testing purposes without aecting your
current programming conguration.

If you are still having trouble
with this please contact:

Email: [e-mail]

PD78X FrontPanelProgramming 090914

Hytera America

Address: 3315 Commerce Parkway

Miramar, Florida 33025, USA

Tel: [phone] Fax: [phone]
http: //www.hytera.us