Hytera PD665i Um, PD666i Um, PD662i Um, PD668i Um User Manual
DIGITAL
PORTABLE RADIO
Preface
Thanks for your favor
in our product. This manual is helpful for you to quickly know how
to use the product. For detailed features and operations, please refer to the Feature
Book along with the product.
This manual is applicable to the following product:
(X may represent 2, 5, 6 or 8)
PD66Xi Um Digital Portable Radio
Instructional Icons
Indicates functions that are available on digi
tal channel only.
Indicates functions that are available on ana
log channel only.
Functions marked with neither the above icons are available on both analog and digital channels.
Disclaimer
Hytera
Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of
accuracy or reliability is given. All the specications and designs are subject to change without notice due to continuous technology development. No part
of this manual may be copied, modied, translated, or distributed in any manner without the express written permission of us.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the Third Party products and contents
involved in this manual.
If you have any suggestions or would like to learn more details, please visit our website at:
http://www.hytera.com.
RF Radiation Information
This
product must be restricted to operations in an occupational/controlled RF exposure environment. Users must be fully aware of the hazards of the
exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits.
RF Radiation Prole
Radio Frequency (RF) is a frequency of electromagnetic radiation
in the range at which radio signals are transmitted. RF technology is widely used in
communication, medicine, food processing and other elds. It may generate radiation during use.
RF Radiation Safety
In
order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to
develop standards for safe exposure to RF radiation. These standards consist of:
●
United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J;
/EU.
As
certied by the qualied laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53
●
American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992;
●
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999;
●
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;
FCC Regulations
Federal Communication
Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards
before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to
enhance their occupational health against exposure to RF energy.
EU Regulatory Conformance
Please note that the above information is applicable to EU countries only.
of the time, or
cause harmful interference to radio communications. However, there is no
accordance with the instructions, it may
against harmful interference in a
easonable protection
FCC Statement
This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of FCC Rules. These limits are designed to provide r
residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in
guarantee that interference will not occur in a particular installation. Verification of harmful interference by this
equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.
Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
RF Exposure Compliance and Control Guidelines and
Operating
Instructions
T
o control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,
always adhere to the following procedures.
Guidelines:
Do not remove the RF Exposure Label from the device.
User awareness instructions should accompany device when transferred to other users.
Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT)
key. To receive calls, release the PTT key. Transmitting 50%
m
ay re
on-approved accessories
The antenna should be kept away from the face and
from the antenna. The antenna
less, is important because the radio
generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).
Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as
RF exposure decreases with distance
eyes.
When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or
sult in exposure levels which
exceed the FCC's occupational/controlled environmental RF exposure limits.
Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure
guidelines.
Contact your local dealer for the optional accessories of the product.
by use of the correct clip for this product. Use of n
Content
Items in the Package ---------------------------------------- 1
Product Overview --------------------------------------------2
Product Controls ---------------------------------------------------2
Programmable Keys ----------------------------------------------3
Before Use ------------------------------------------------------ 3
Assembling the Radio --------------------------------------------3
Charging the Battery ----------------------------------------------4
Checking the Battery Power ------------------------------------5
Status Indication ---------------------------------------------5
LCD Icon -------------------------------------------------------------5
LED Indicator -------------------------------------------------------7
Menu Navigation----------------------------------------------8
Basic Operations --------------------------------------------- 9
Powering On/Off ---------------------------------------------------9
Adjusting the V
olume
---------------------------------------------9
Selecting a Zone ---------------------------------------------------9
Selecting a Channel -----------------------------------------------9
Managing the Contacts -------------------------------------------9
Call Service-----------------------------------------------------10
Private Call ----------------------------------------------------10
Group Call
-----------------------------------------------------10
Call on
Analog Channel (No Signaling)
----------------11
Emergency Call ----------------------------------------------------11
Message Service ----------------------------------------- 11
T
roubleshooting
----------------------------------------------12
Care and Cleaning -------------------------------------------14
Optional Accessories 42
1
Note
Note
Items in the Package
Please unpack carefully and check that all items listed below are
received. If any item is missing or damaged, please contact your dealer.
The frequency band is marked on the label of the
antenna; if not, refer to the label on the radio for
frequency band information.
All pictures in this manual are for reference only.
Loading...