Hytera PD606i Um, PD608i Um, PD602i Um, PD605i Um User Manual

PD60Xi Um (X may represent 2,

Preface

Thanks for your favor in our product. To derive optimum performance from the product, please read this

manual and the supplied Safety Information Booklet carefully before use.

This manual is applicable to the following model:

5, 6 or 8) Digital Portable Radio

Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in

the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its

trademarks and product names. All other trademarks and/or product names that may be used in this manual are

properties of their respective owners.

The product described in this manual may include the Company's computer programs stored in memory or other

media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its

computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any

rights to the purchaser regarding the Company's computer programs. The Company's computer programs may not

be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent

of the Company.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or

reliability is given. All the specifications and designs are subject to change without notice due to continuous

technological development. No part of this manual may be copied, modified, translated, or distributed in any

manner without the prior written consent of the Company.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of

the third-party products and contents involved in this manual.

If you have any suggestions or would like to receive more information, please visit our website at:

http://www.hytera.com.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in

accordance with the instructions, it may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. Verification of harmful interference by this

equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to

try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.

 Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use

NOTICE: This radio is intended for use in occupational/controlled conditions where users have full

knowledge of their exposure and can exercise control over their exposure to meet the

occupational limits in FCC and International standards. This radio device is NOT authorized for

general population consumer use.

This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between

two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls.

RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays.

RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used

improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic

material.

Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for

safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and

the general public. These recommended RF exposure levels include substantial margins of protection.

All Hytera radios are designed, manufactured, and tested to ensure they meet government-established RF

exposure levels. In addition, manufacturers also recommend specific operating instructions to users of radios.

These instructions are important because they inform users about RF energy exposure and provide simple

procedures on how to control it.

Please refer to the following websites for more information on what RF energy exposure is and how to control

your exposure to assure compliance with established RF exposure limits:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

Compliance with RF Exposure Standards

Hytera's radio complies with the following RF energy exposure standards and guidelines:

 United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310

and 2.1093

 American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers

(IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015

 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,

always adhere to the following procedures.

Guidelines:

 Do not remove the RF Exposure Label from the device.

 User awareness instructions should accompany device when transferred to other users.

 Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

 Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT)

key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio

generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).

 Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as

RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and

eyes.

 When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or

by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which

exceed the FCC's occupational/controlled environmental RF exposure limits.

 Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure

guidelines.

 Contact your local dealer for the optional accessories of the product.

Contents

1. Documentation Conventions ............................................................................................................. 6

1.1 Instructional Icons ........................................................................................................................... 6

1.2 Notational Conventions ................................................................................................................... 6

1.3 Key Operation ................................................................................................................................. 6

2. Items in the Package .......................................................................................................................... 8

3. Product Overview ............................................................................................................................... 9

3.1 Product Controls ............................................................................................................................. 9

3.2 Programmable Keys ..................................................................................................................... 10

4. Status Indication .............................................................................................................................. 12

4.1 LED Indicator ................................................................................................................................ 12

5. Before Use ........................................................................................................................................ 13

5.1 Charge the Battery ........................................................................................................................ 13

5.2 Assembling Accessories ............................................................................................................... 14

5.2.1 Assembling the Antenna ..................................................................................................... 14

5.2.2 Assembling the Battery ....................................................................................................... 14

5.2.3 Assembling the Belt Clip ..................................................................................................... 15

5.2.4 Attaching Audio/Programming Cable .................................................................................. 15

6. Basic Operations .............................................................................................................................. 16

6.1 Powering On/Off ...........................................................................................................

................ 16

6.2 Adjusting the Volume .................................................................................................................... 16

6.3 Adjust Power Level ....................................................................................................................... 16

6.4 Selecting a Zone ........................................................................................................................... 16

6.5 Selecting a Channel ...................................................................................................................... 16

6.6 Switching the Channel Mode ........................................................................................................ 16

7. Call ..................................................................................................................................................... 18

7.1 Private Call

........................................................................................................................... 18

7.2 Group Call

............................................................................................................................ 18

7.3 All Call

.................................................................................................................................. 18

7.4 Calls on Analog Channels

..................................................................................................... 18

7.5 One Touch Call ............................................................................................................................. 19

7.6 Time-out Timer (TOT) ................................................................................................................... 19

7.7 Busy Channel Lockout .................................................................................................................. 19

7.8 Pseudo Trunking

.................................................................................................................. 19

8. Functions and Operations ............................................................................................................... 20

8.1 Rent .............................................................................................................................................. 20

8.2 Scan .............................................................................................................................................. 20

8.3 Roam

▼ .............................................................................................................................. 20

8.4 Talk Around .................................................................................................................................. 21

8.5 Monitor

.................................................................................................................................... 21

8.6 Squelch Off

........................................................................................................................... 21

8.7 Adjust Squelch Level

............................................................................................................. 21

8.8 VOX .............................................................................................................................................. 22

8.9 LQO .............................................................................................................................................. 22

8.10 Covert Mode ............................................................................................................................... 22

8.11 GPS Report

▼ .................................................................................................................. 22

8.12 Battery Power Indicator ............................................................................................................... 22

8.13 Audio Feedback Suppression ..................................................................................................... 23

8.14 MIC AGC .................................................................................................................................... 23

8.15 Radio Registration Service

................................................................................................. 23

8.16 Telemetry

▼ ...................................................................................................................... 23

8.17 Man Down ▼ ............................................................................................................................. 24

8.18 Lone Worker ............................................................................................................................... 24

8.19 Priority Interrupt .......................................................................................................................... 24

8.19.1 Manual Priority Interrupt ................................................................................................... 24

8.19.2 Auto Priority Interrupt ........................................................................................................ 25

8.20 Scrambler /Encrypt .......................................................................................................... 25

8.21 Emergency Alarm ....................................................................................................................... 26

8.21.1 Emergency Type ............................................................................................................... 26

8.21.2 Emergency ID Type

................................................................................................... 26

8.21.3 Emergency Mode .............................................................................................................. 27

8.21.4 Operation Methods for Analog Emergency

............................................................... 27

8.21.5 Operation Method for Digital Emergency

................................................................. 29

9. Troubleshooting ............................................................................................................................... 31

10. Care and Cleaning .......................................................................................................................... 33

11. Appendix ......................................................................................................................................... 34

12.1 Signaling Introduction ................................................................................................................. 34

12.1.1 HDC1200 .......................................................................................................................... 34

12.1.2 5-Tone ............................................................................................................................... 34

12.1.3 2-Tone ............................................................................................................................... 35

1. Documentation Conventions

For your better understanding of this manual, please read the following conventions first.

1.1 Instructional Icons

Icon Description

Note Indicates references that can further describe the related topics.

Caution Indicates situations that could cause data loss or equipment damage.

▼

Indicates that the function is unavailable on PD60Xi digital

portable radio.

Indicates functions that are available on digital channel only.

Indicates functions that are available on analog channel only.

Functions marked with no function icons are available on both analog

and digital channels.

1.2 Notational Conventions

Convention Description

“ ”

The quotation marks enclose the name of a software interface element.

For example, click “OK”.

Bold

The text in boldface denotes the name of a hardware button. For example,

press the PTT key.

The symbol directs you to access a multi-level menu. For example, to

select “New” from the “File” menu, we will describe it as follows: File ->

New.

1.3 Key Operation

Operation Definition

Short press To press a key and release it quickly.

Operation Definition

Long press To press a key for the preset time (2s by default) and release it.

Hold To press a key and do not release it.

2. Items in the Package

Please unpack carefully and check that all items listed below are received. If any item is missing or

damaged, please contact your dealer.

Radio Battery Charger

Power Adapter Antenna Belt clip

Strap Documentation Kit

Note: The frequency band of the antenna is marked on the label of the antenna; if not, refer to the

label on the radio for frequency band information.

3. Product Overview

This section introduces the mechanical structure and the programmable key features of this radio.

3.1 Product Controls

No. Part Name No. Part Name

○

1 SK1 (Side Key 1)

○

8 Power On-Off/Volume Control Knob

○

2 PTT (Push-to-Talk) Key

○

9 Microphone

○

3 SK2 (Side Key 2)

○

10 Accessory Jack

○

4 TK (Top Key)

○

11 Battery latch

○

5 Channel Selector Knob

○

12 Antenna

○

6 Speaker

○

13 Belt clip

○

7 LED Indicator

○

14 Battery

3.2 Programmable Keys

For enhanced convenience, you may request your dealer to program the keys SK1, SK2 and TK as

shortcuts to the functions listed below.

No. Shortcut Key Description

1 Zone Up

To select a zone quickly

2 Zone Down

3 Adjust Power Level To adjust the power level quickly. The power level: High and Low.

4 Talk Around

To switch the operation mode between the Direct mode and the

Repeat mode quickly.

5 Monitor

Press this key to switch to the Monitor Squelch Mode, and press it

again to switch to the Rx Squelch Mode.

Monitor Momentary

Press this key to start monitoring, and release it to exit monitoring.

This feature is linked with both the long press and short press of the

key.

7 Squelch Off

To activate the Squelch Off feature quickly, so the speaker will be

unmuted. The feature will remain active upon radio restart.

Squelch Off

Momentary

Press this key to activate the Squelch Off feature momentarily.

Release it to return to the previous mode. The Squelch Off Momentary

feature must be assigned to short press and long press of a key

together.

9 Scan To enable or disable the Scan feature quickly.

Nuisance

Temporary Delete

To temporarily ignore rarely used channel activity.

Adjust Squelch

Level

To change the squelch level among Open, Normal and Tight.

Battery Power

Indicator

Press this key and check the current battery power status via the LED

indicator.

13 Man Down ▼ To enable or disable the Man Down function quickly.

14 Scramble

To enable or disable the Scrambler feature quickly. Scrambler is used

to encrypt your voice so as to guarantee privacy of your

+ 25 hidden pages

Hytera PD606i Um, PD608i Um, PD602i Um, PD605i Um User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual