2
Icon Conventions
: Indicates functions that are available on digital channel only.
: Indicates functions that are available on analog channel only.
Functions marked with no icon are available on both analog and digital
channels.
Disclaimer
Hytera Communications Corporation Limited (the Company) endeavors to
achieve the accuracy and completeness of this manual, but no warranty
of accuracy or re liability is give n. Al l the specifications a nd designs
are s ubj ect to change w ithout notice d ue to
con tin uous t echno log y
development. No part of this manual may be copied, modified, translated,
or distributed in any manner without the express written permission of us.
We do not guarantee, for any particular purpose, the accuracy, validity,
timeliness, legitimacy or completeness of the Third Party products and
contents involved in this manual.
If you have any suggestions or would like to learn mo
re details, please visit
our website at: http://www.hytera.com.
RF Radiation Information
This product must be restricted to operations in an occupational/controlled
RF exposure environment. Users must be fully aware of the hazards of the
exposure and able to exercise control over their RF exposure to qualify for
the higher exposure limits.
RF Radiation Prole
Radio Frequency (RF) is a frequency of electromagnetic radiation in the
range at
which radio signals are transmitted. RF technology is widely
used in communication, medicine, food processing and other fields. It may
generate radiation during use.
RF Radiation Safety
In order to ensure user health, experts from relevant industries including
sc ienc e, en g ine e rin g, me d icin e an d he alth wor k wi th i nter nati onal
organizations to develop standards for safe exposure to RF radiation.
These standards consist
of:
● United States Federal Communications Commission, Code of Federal
Regulations; 47CFR part 2 sub-part J;
● American National Standards Institute (ANSI)/Institute of Electrical and
Electronic Engineers (IEEE) C95. 1-1992;
● Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999;
● Inte rna tiona l C ommissio n o n Non -Io nizin g R adiation Prot ect ion
(ICNIRP) 1998;
FCC Regulations
Fe dera l Co m muni cati o n Co mmi s sion (FCC) req uire s th a t a l l ra dio
communi cat ion pr oducts sh ould m eet the requ ire ments set forth in
the above standards before they can be marketed in the U.S, and the
manufacturer shall post a RF label on the product to inform users of
operational instructions, so as to enhance their occupational health against
exposure to RF energy.
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/
controlled environment RF energy exposure limits in the above standards
and guidelines, users should transmit not more than 50% of the time and
always adhere to the following procedures:
● RF energy will be generated only when the radio is transmitting.
● The radio must be at least 2.5 centimeters away from human body
when transmitting.