Hytera BD302, BD305, BD306, BD308 Owner's Manual
DI GITAL PORTABLE RADIO
数字手持终端
OW NE R’ S MA NUAL
使用说明书
Thanks for your favor in our product. This manual provides guidance for you to use the
Preface
product. To avoid body injury or property loss caused by misoperation, please carefully
read the Safety Information Booklet before using the product.
This manual is applicable to the following product:
BD30X Digital Portable Radio (X may represent 2, 5, 6 or 8)
DIGITAL PORTABLE RADIO
Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications
Corporation Limited (the Company) in PRC and/or other countries or
areas. The Company retains the ownership of its trademarks and product
names. All other trademarks and/or product names that may be used in
this manual are properties of their respective owners.
The product described in this manual may include the Company’s
computer programs stored in memory or other media. Laws in PRC and/
or other countries or areas protect the exclusive rights of the Company
with respect to its computer programs. The purchase of this product shall
not be deemed to grant, either directly or by implication, any rights to
the purchaser regarding the Company’s computer programs. Any of the
Company’s computer programs may not be copied, modied, distributed,
decompiled, or reverse-engineered in any manner without the prior written
consent of the Company.
Disclaimer
The Company endeavors to achieve the accuracy and completeness
of this manual, but no warranty of accuracy or reliability is given. All the
specifications and designs are subject to change without notice due
to continuous technology development. No part of this manual may be
copied, modied, translated, or distributed in any manner without the prior
written consent of the Company.
We do not guarantee, for any particular purpose, the accuracy, validity,
timeliness, legitimacy or completeness of the Third Party products and
contents involved in this manual.
If you have any suggestions or would like to learn more details, please visit
our website at: http://www.hytera.com.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct.
The interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: 1. This device may
not cause harmful interference, and 2. This device must accept any
interference received, including interference that may cause undesired
operation.
Note: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
Compliance with RF Exposure Standards
Hytera’s portable radio complies with the following RF energy exposure
standards and guidelines:
●
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR § 1.1307, 1.1310 and 2.1093
●
American National Standards Institute (ANSI) / Institute of Electrical
and Electronic Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue
5 March 2015.
●
Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005
Edition
RF Exposure Compliance and Control Guidelines
and Operating Instructions
To control your exposure and ensure compliance with the occupational/
controlled environment exposure limits always adhere to the following
procedures.
Guidelines:
●
Do not remove the RF Exposure Label from the device.
●
User awareness instructions should accompany device when
transferred to other users.
●
Do not use this device if the operational requirements described herein
are not met.
Operating Instructions:
●
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the Push-To-Talk (PTT) button. To receive calls,
release the PTT button. Transmitting 50% of the time, or less, is
important because this radio generates measurable RF energy
exposure only when transmitting (in terms of measuring for standards
compliance).
●
Hold the radio in a vertical position in front of face with the microphone
(and the other parts of the radio, including the antenna) at least one
inch (2.5 cm) away from the nose. Keeping the radio at the proper
distance is important because RF exposures decrease with distance
from the antenna. Antenna should be kept away from eyes.
●
When worn on the body, always place the radio in a Hytera’s approved
clip, holder, holster, case, or body harness for this product. Using
approved body-worn accessories is important because the use of
Hytera’s or other manufacturer’s non-approved accessories may result
in exposure levels, which exceed the FCC’s occupational/controlled
environment RF exposure limits.
●
If you are not using a body-worn accessory and are not using the
radio in the intended use position in front of the face, then ensure the
antenna and the radio are kept at least 2.5 cm (one inch) from the
body when transmitting. Keeping the radio at the proper distance is
important because RF exposures decrease with increasing distance
from the antenna.
●
Use only manufacturer’s name approved supplied or replacement
antennas, batteries, and accessories. Use of non-manufacturer-name
approved antennas, batteries, and accessories may exceed the FCC
RF exposure guidelines.
●
Contact your local dealer for the optional accessories of the product.
IC Statement
The device has been tested and compliance with SAR limits, users can
obtain Canadian information on RF exposure and compliance
Après examen de ce matériel aux conformité aux limites DAS et/ou aux
limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition
aux radiofréquences et la conformité and compliance d’acquérir les
informations correspondantes
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement
EU Regulatory Conformance
As certied by the qualied laboratory, the product is in compliance with
the essential requirements and other relevant provisions of the following
directives:
●
1999/5/EC or 2014/53/EU
●
2006/66/EC
●
2011/65/EU
●
2012/19/EU
Please note that the above information is applicable to EU countries only.
Loading...