Long press the power button for about 5 seconds, blue indicator flashes means the
product begin enter into the distribution network mode.
Short press the power button, blue indicator lights up means power on, blue indicator
lights off means power off.
Technical Parameters
Maximum current: 15A
Rated voltage: 120V
Rated power: 1800W
Input voltage range: 100-240V
Wireless Type: Wi-Fi 2.4GHz
Max OutputPower: 8.74 dBm
Operating temperature: 0 ℃ - 40 ℃
Support system: Android \IOS
Turn On Intelligence
Use your phone to scan the QR code below or search “smart life” in
application market to download and install the App
Step 1: Registration and login "smart life" APP.
If you don't have the account of “Smart life” APP,register an account or sign in with
cellphone number + verification code.This page describes the Registration process.
1.Tap“Register”in the upper right(pic 1)
2.The system automatically determines your country / area.You can also select your
country code by yourself. Enter the cellphone number/E-mail and tap “Next” (pic 2)
第 1 页 共 6页
3.If you enter the mobile cellphone number,enter the verification code in the message
(pic 3),and enter the password,tap"Confirm" to finish your registration.
4.If you enter the E-mail,enter the password (pic 4),tap” Confirm" to finish your
registration.
Make sure your phone is connected to WiFi in your home. Click "+" in the upper right
corner of the homepage and select "Electrical outlet" from the device type.
Step 2: Connect with the power supply, long press the power button more than 5
seconds until the blue indicator enters into the fast flash mode.Select confirm indicator
rapidly blinks.
Step 3: Enter your WiFi password for your phone and click "Confirm" to enter the
page of the search device.
第 2 页 共 6页
Step 4: Enter the device page, then complete the configuration
How to use Amazon Echo to control your Smart devices?
Step 1: Open the” Amazon Alexa”APP,then find the “Skills “button on the menu. Press
it.
第 3 页 共 6页
Step 2: Search the” Smartlife” and choose the first one, then Enable it.
Step 3: Select your country code and Enter your “Smart life” APP Account and
Password, then press the “Link Now” button. When the Account success to login
press the “Done” button.
第 4 页 共 6页
Step 4: Back to the menu, and press the “Smart home” button, then choose the
“Devices”, then press the ”Discover” button.
第 5 页 共 6页
Step 5: Now u can use your Alexa to control your Smart devices, enjoy yourself.
第 6 页 共 6页
Warnings
This device complies with part 15 of the FCC Rules and
Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
de moin de 20 cm. Installer les antennes de facon à ce que
le personnel ne puisse approcher à 20 cm ou moins de la
position centrale de l’ antenne.
Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.
MPE Reminding
To satisfy FCC / IC RF exposure requirements, a separation
distance of 20 cm or more should be maintained between
the antenna of this device and persons during device
operation.
To ensure compliance, operations at closer than this
distance is not recommended.
Les antennes installées doivent être situées de facon à ce
que la population ne puisse y être exposée à une distance
La FCC des éltats-unis stipule que cet appareil doit être en
tout temps éloigné d’au moins 20 cm des personnes
pendant son functionnement.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.