HySecurity MX001092, MX001308, MX002065, MX001908, MX3402 Installation Instructions Manual

MX001092, MX001093, MX001308, MX001908, MX002065, MX3753, MX3402

www.SecureOpeners.com | [phone] | [e-mail]

Changing the Start Switch or Capacitor

Installation Instructions

Capacitor (1 of 2
shown)

Tools Needed

To avoid risk of injury or death, turn off the gate operator and disconnect it from
the main power source prior to performing any of the following procedures!

Leeson Motor: Replacing the Start Switch

Fastener secures the
start switch

Motor

mounts

Start
Switch

Fastener secures
the start switch

Juncon box

front panel

Leeson Motor

Motor mounts

www.SecureOpeners.com | [phone] | [e-mail]

Start Switch

Rubber seal

Leeson Motor: Replacing the Capacitors

Juncon box
front panel

Capacitors with enclosures

Fasteners (2 for each enclosure)

Leeson Motor

Leeson Motor — External Wiring Diagram

www.SecureOpeners.com | [phone] | [e-mail]

To avoid risk of injury or death, turn off the gate operator and disconnect it from the

www.SecureOpeners.com | [phone] | [e-mail]

main power source prior to performing any of the following service procedures!

Two fasteners secure the
Start Switch

Baldor Motor: Replacing the Start Switch

Baldor Motor: Replacing the Capacitors

Pin 4

Pin 3

Pin 2

Four fasteners hold

the front panel to

the juncon box
Motor
mounts

Juncon box and

front panel

Pin 1

Capacitor enclosure

Baldor Motor

Spade Connections to

Starter Switch

White with

www.SecureOpeners.com | [phone] | [e-mail]

black stripe

White with blue stripe

One wire per
terminal.

Capacitor Wiring

Spring retainer

Lead end

Interior stando

Insulator sheet

Capacitor Enclosure Interior

www.SecureOpeners.com | [phone] | [e-mail]

Baldor Start Switch Wiring